Aluminum vs Steel Above Ground Pools

Aluminum vs Steel Above Ground Pools

It’s not as big a question as it was six or eight years ago, but I still get a fair amount of people asking about aluminum above ground pools. The main reason anyone would consider an aluminum over a steel above ground pool is to avoid rust. This is definitely true as aluminum won’t rust. Rust is a term that is used only for the oxidation of iron and aluminum has no iron. It will corrode, though, so there’s not much to gain in getting an aluminum pool, but it’s worth going over the pros and cons just in case your heart is set on getting one.

If you don’t want to read this whole article just to get my opinion, then no worries. I’ll give it to you right now. In the general sense, aluminum pools are not worth the extra cost. Now, if you have the time to find out why, read on.

The Different Types of Aluminum and Steel Above Ground Pools

There are about six variations of aluminum and steel pools and they each have pluses and minuses. Let’s go over them. Shall we?

click here to find your Replacement Above Ground Pool Parts

I. All aluminum pool

This is an above ground that has every part of it made of aluminum. The wall, top and bottom tracks, all the connectors, stabilizer bars, top rails, uprights, and top caps are 100% aluminum. These pools are usually nicer than average and are a lot more expensive.

II. All steel pool

all steel above ground pool
All Steel, All Fun

All steel pools aren’t as common as before, but there are still quite a few of these manufactured. They have steel walls, tracks, connector plates, uprights, stabilizer bars, top rails, and top caps. These are mostly the lower-end models of above grounds.

III. Part aluminum, part steel pool

There are some variations here, but mostly these pools will have aluminum top rails and caps and the rest is steel. These aren’t too bad, because they have steel walls. They can still be quite a bit more expensive, though.

IV. Part steel, part resin (aka hybrid above ground pools)

resin above ground pool
Hybrid Steel-Resin Above Ground Pool

This is the most popular type of above ground today. Almost all of them will have steel walls, but there are various combinations of resin and steel parts. Some will have resin bottom tracks and/or resin connector plates. Some will have resin uprights with steel bottom tracks. Most of these, though, come with resin top rails and caps with everything else being made of steel. Overall, this is my favorite combination.

V. Part aluminum, part resin

This isn’t a super common type, but I do see these. They mostly have aluminum walls, top connectors, and stabilizer bars combined with resin top rails. These are not my favorite as they have aluminum walls and are still pricey for what you get.

Resin Above Ground Poo
Welcome to the Matrix, Resin Above Ground Pool

VI. All resin pool

I hear this term a lot and it’s not accurate. Resin material is plastic and is in no way strong enough to hold the pool water. So, an all resin pool still has to have a wall made of metal. And they almost all have steel walls. So, an all resin pool really is a pool that has every part of it made of resin, except the wall.

Also, some pools that are called “all resin” will still have some steel parts like connector plates and steel screws. The only model that comes to mind that is truly all resin (except of course the wall) is one called the Matrix by Wilbar.

VII Extruded aluminum wall pool

This type of above ground has quite a different wall from the others. The other pool walls are one continuous piece while this one comes in sections that interlock together.  The wall sections are made of extruded aluminum which makes them stronger and thicker. The extra thickness is very important in that this wall could never corrode enough to make the wall fail and not hold the water of the pool.

This pool is considerably more expensive than the others and the only real difference is the wall. Manufacturers sell this as a semi in-ground pool and that’s why it has that fancy wall system. The wall is strong enough not to cave in when the pool is empty and in the ground. This is nice and true, but I’m not sure if it’s worth the extra cost as a regular walled above ground pool goes in the ground too and usually with few issues.

VIII. Semi in-ground pool

I hear this term more and more and it’s slightly misused. First off, there really is a thing called a semi in-ground pool and that’s not at all what I’m talking about here. A real semi in-ground pool is closer to an in-ground vinyl liner pool than an above ground in price and structure. A more accurate term for what I’m discussing is a “semi in-ground above ground pool”.

The term semi in-ground is used for above ground pools that can go partially in the ground. I say this is a misused term, because all above ground pools can go partially in the ground. The fact is the only real “semi in-ground above ground” pool that I know of is the above-mentioned extruded aluminum wall pool. Interestingly, I have installed the extruded aluminum pool above the ground as much as I have installed it semi in the ground.

Nice List, Dude, but Should I Get Aluminum or Steel?

The above-mentioned types of pools have three kinds of walls – steel, aluminum, and extruded aluminum. If I’m strictly speaking of the wall itself, then I don’t see any advantage to getting the regular aluminum wall for your above ground pool. They are flimsy and are too thin to stop corrosion from eventually compromising the wall’s integrity. Regular aluminum walls are bad for installing the pool halfway in the ground too as they are not at all rigid and thus have a greater capability for a cave-in when the pool is empty.

Extruded aluminum walls are really strong and will last forever, but the price difference is really big. Unless you have enough money for it not to matter, I don’t recommend the extruded wall pool. Steel walls is my choice. Most above grounds have steel walls so you’re good there.

So, now that I have established that I prefer the wall of the pool to be steel, what about the other parts? I have had good luck with other parts of the pool being aluminum. Uprights and top rails made of aluminum seem to hold up better than steel ones for sure. I do prefer resin top rails over all others as they usually hold up better than the metal ones. I also prefer the bottom track and connectors to be made of steel too as aluminum can be too light and flimsy and resin connectors can crack.

When buying a hybrid above ground, there is almost no way to find out which parts are made of what and it may not matter much anyway. For me the best combination is for a pool to have a steel wall, steel bottom track, steel or aluminum bottom connectors, steel or aluminum top connectors, steel top stabilizer bars, steel or aluminum uprights, and resin top rails and caps.

click here to find your Replacement Above Ground Pool Parts

84 thoughts on “Aluminum vs Steel Above Ground Pools

  1. I’m trying to decide between a Sharkline navigator (Aluminum) and a Sharkline escalade (Steel). The navigator is about 3k more….is it worth spending the extra $$? I’m up in the northeast so weather conditions are harsh.

  2. This article has been extremely helpful! I am curious however if the recommendation for steel track is different based on geographic location. For example, in Ohio do you prefer steel or resin track?

  3. We just purchased a new steel walled sharkline Summerfield pool and had it installed. My son was the first one in and he is only 9 and i noticed the pool creaking in spots where the braces are. Installer said that’s normal in a new pool and will stop. I don’t see anyone else having this problem. Thoughts?

  4. Hello, we just bought online Doughboy Oval 12×20 pool. We are having hard time locating the installers. They said nobody wants to touch Doughboy 🙁 Is that something you ever heard? I am so confused 🙁 Thank you!

    1. Yes. I’ve heard it from my own mouth. Old school Doughboys are a challenge to build but what “they” are talking about here is about the fact that the Doughboy oval doesn’t have straps running underneath it so the buttresses have to be secured by burying concrete blocks filled with concrete. And that’s a pain when you don’t do that too often.

  5. Do u carry the outter shell of above ground 27″ pool ours is thin around where the skimmer is. Looking on price

  6. Looked at the Ultimate Pool by Fox – seems to be the best of the best in above ground pools, but there is very little online presence…can’t find anyone posting comments about their experience with a Fox – any thoughts on this pool?
    Thank you.

      1. Dan, we want to put in a 24’ round above ground . Thinking aluminum/resin. Any suggestions and order from whom? Price, under 3500.00.

        Thanks

        Ken

  7. Any thoughts on Signature RTL, Hampton or Quest? 18′ round replacement pool in the Northeast. Thank you!

    1. Any retailer can call any pool any name they want, so I don’t know which pool you are asking about. I am OK with Wilbar pools so if that’s what they are, then you’re most likely good.

    1. Any retailer can call any pool any name they want so I need more info on who makes it to know which one it is. It looks like Namco sells one with that name but their pages on it don’t exist when I looked.

  8. We are i the process of buying a pool. We are looking at the Doughboy Palm Shore 52″ 8 1/2 steel top rails , 7″ Steel Verticals. The cost is about 11k that includes install. I am afraid I am out of my league when it comes to a purchase such as this and want to make sure that I am not being taken advantage of. Please let me know your thoughts. The pool comes with all the bells and whistles from what I can tell. The only thing that I am not seeing on the list they game me was the ladder. What are your thoughts this is through a company called A-TEX

    1. The price seems high but I don’t know what you are getting in the package or what size pool or shape, and I don’t know anything about the install. Also, you typically pay more when the install is done by the retailer. Plus, Doughboys are expensive for what you get. Because of all these unknowns, The price may be ok.

Leave a Reply

Your email address will not be published.

Recommended Resources

Should you install your pool on a concrete pad? - INYOPools.com

Should you install your pool on a concrete pad?

Rob and Matt tackle a question about winter pool covers “Should you install your pool on a concrete pad?"...
Read Now
Poolside Chat - Custom Covers & Above Ground Pool Parts - Inyopools Episode 1

Video: Poolside Chat Episode #1 – Custom Covers & Above Ground Pool Parts

Today we have started our new video series, Poolside Chat. We came up with a revolutionary concept – to answer the...
Read Now
how to fill your above ground pool?

Filling Your Above Ground Pool

So you’re finally getting that swimming pool. You’ve figured out which above ground pool to buy, how big it will be,...
Read Now

Looking for pool parts?

Shop Motors Shop Filters Shop Pumps Shop Salt Systems Shop Lights Shop Cleaners
Copyright © 2024 INYOpools All rights reserved