Test The Salt Level Of A Pool

How To Test The Salt Level Of A Pool

Hey pool owners, it’s Rob with INYOPools. Today, we’re going to show you how to check the salt level with test strips. Now, some people might go just by the salt level on their salt system but that’s not always the most accurate method, especially if you’re trying to recalibrate it. 

We will be using this AquaChek Pool Salt Test Strips to assess our salinity level. These are a little different than your normal test strips where the other test strips you would just swipe it in the water and then compare the results. Let’s go through the steps, follow along with the video.

 

 

Step 1

Using the small specimen cup included in the kit collect sample pool water. The test requires there be about an inch of water in the cup. When taking the sample, go at least wrist deep.

Step 2

Sit the lower end of the test strip into the water sample, and let it soak for 3 to 4 minutes. The yellow band at the top of the strips will turn dark when the test is complete. As the strip soaks up the salt, the dark indicator strip will fade upwards.

Step 3

Remove the test strip from the sample, then find the highest point of the faded portion on indicator strip number scale, this is your result.

Step 4

Using the chart printed on the bottle, translate the test strip result value into a salinity reading.

 

This whole process shouldn’t take longer than 5-10 minutes. Our test strip’s line reached to about 6.2 mark. At 6.2, it’s saying I have 2,960 parts per million of salt. For my salt chlorine generator, the ideal salinity level is 3200 ppm. The desired salinity level varies according to the make and model of your system so make sure you refer to your owner’s manual.

So that is how you can test your pool water’s salt level. If you have any questions leave a comment down below or visit us over at www.INYOPools.com.

 

click here to find your replacement Salt System Parts

2 thoughts on “How To Test The Salt Level Of A Pool

Leave a Reply

Your email address will not be published.

Recommended Resources

PSC Ep. 55: How to remove oil from pool water?

PSC Ep. 55: How to remove oil from pool water?

In today’s episode of Poolside Chat, Rob and Matt tackle another common swimming pool question: How to remove oil from pool...
Read Now
What order should I install my pool equipment?

In What Order Should I Install My Pool Equipment?

The plumbing order of your pool equipment can sometimes seem arbitrary, especially if you have the pleasure of owning a PVC...
Read Now
How to size a salt chlorine generator

How to Size a Salt Chlorine Generator for My Pool

Hello prospective salt chlorine generator owner, I hope all is well and your search for the best brand for your pool...
Read Now

Looking for pool parts?

Shop Motors Shop Filters Shop Pumps Shop Salt Systems Shop Lights Shop Cleaners
Copyright © 2024 INYOpools All rights reserved