What does my pool diverter valve control?

What Does My Valve Control?

Good question; strike that, great question!  This topic is brought up quite often by puzzled pool owners presented with a rat’s nest of pipes, elbows, valves and pumps. The state of some pool plumbing systems makes you wonder if they charged by the hour or by the pipe. The maze of PVC and excessive valves causes an issue when attempting to find the source or outlet of water flow.

Another common reason we have trouble identifying a pool diverter valve’s function is the label may have bleached out or fallen off. These are natural occurrences that we normally do not think about until we are squinting to read faded print on a baked label. But we are here today to let you know a little trick on identifying the function of your valve in both of these cases.

We call it the “Trial and Error Method”! Ok it is nothing new but it is the simplest way of getting to know your plumbing system. We will walk you through the steps so you no longer stare at your pool diverter valves with deep ponderings of what they may do.

Before we jump in, let us first illustrate how the common two-way and three-way valves operate. The two way valve has two ports; when open, the handle is perpendicular with the pipe and when closed, it is in line. For three way valves: the valve is open when the handle is over the middle port. The three way port can close in three directions; whichever port is opposite the handle position, that will be the closed port.

Part One: Pencil & PaperPAPER-AND-PENCIL

The simplest of the steps; we will be using this to number our valve and plot out the water entry points throughout our system. Mark each pool diverter valve with a number and sketch your pool marking the inlets with a letter. As we are checking off each valve, we will mark down which valve goes with what inlet with this simple number-letter scheme.

Make two separate categories: Suction Side and Pressure Side. The suction side will be focusing on the valves before the pump and pressure side will be for valves on the return lines.

Part Two: Find Your Water Inlets

As mentioned in the previous step, we want to locate each inlet before we start fiddling with valves. These entry points include return lines, waterfalls, laminars, spa jets or bubblers.

Step1RStep 3: Turn on the Pump

To identify the direction of water flow, the pump will need to be on while we open and close the valves. Unlike a multiport valve, when we change positions on a diverter valve we do not need to turn off the main pump. As we go through our progression of valves always make sure at least one outlet valve is open before closing the previously tested. This process will prevent a dangerous level of back pressure from building within the pipe. Back pressure can damage your pool equipment or swimmers. The same rule applies to the suction side of pumps; make certain at least one of the inlet lines is fully open to prevent the pump from running dry.

To help in this process, I would suggest having a helper who can check for water flow at the specified water inlet while someone is progressing through the valves. This will cut down on the running back and forth between the pool equipment and the pool.

At this point we have marked our valves and water inlets and have the pump running; now we can start cycling through the valves to determine the location of their output.

Part Four: Turn on Individual Valves: Check Flow

Pressure Side

Open the valve we have designated as Valve One, and close all the other valves. While the pump is running, check each of the known water 1_P1080150ainlets for flow. We can do this by sight or by hand. If the port is below water it may be hard to determine if water is flowing by sight alone. Match the designated letter of the inlet with the valve number that is open. Follow these steps until all valves and inlets are identified.

Suction Side

Most pools have a series of skimmers and main drain lines that consolidate to single line as it reaches the filter pump; in that case  we would work reverse the flow of water and check valves starting with the last valve before the pump’s intake port.

This example shows a three way valve where one side controls the main drain and the other side the skimmers. To determine the water flow, close the one side of the valve as the pump is running. Visually inspect the skimmer(s) for water flow and the telltale swirl of draining water through the basket. If the skimmer is draining water then the main drain is closed, and vice versa. Make the necessary mark on our valve checklist.

On the chance there are multiple main drains controlled by separate valves or a three-way valve, identifying becomes a little trickier. We need to be able to determine which valve is open and which is closed and that is not something we can visually inspect from the deck. For those of you reading this in cold weather who do not wish to take multiple dips in the pool, there is a easy trick to determine flow. Take some food dye and drop a few teaspoons into the water. As the dye sinks to the bottom the active drain will draw it allowing us to visually check which drain is open for our checklist. Success! This trick is also used in finding leaks in pool wall and floors.

**DO NOT STICK YOUR HAND IN SKIMMER OR ON MAIN DRAIN TO CHECK FLOW**

Part Five: Buy a Label Makerpeanutlabel

Label each diverter valve with the Name/Description of each inlet that it controls; this will prevent us from doing this again. Once the valves are labeled, take a picture of the system and email to yourself or store it somewhere safe. Just in case the labels you made fade away or fall off, you have a pipe map at your fingertips.

Thank you for sticking around and reading my blog. If you have any further questions, please give our techs a call at 877-372-6038. We are glad to help!

click here to find your replacement pool filter valve parts

12 thoughts on “What Does My Valve Control?

  1. Hello Matthew,
    We purchased a pool with an in ground pool. Even the guy that cleaned the pool said just leave them
    where there at and don’t change them. Just read your article on “what does my valve control”.
    Thank you!! I NOW KNOW what each valve does. I thought my shallow end skimmer was broke
    since it never seemed to run. Turns out the valve was never turned on! Thanks again.

  2. hi,
    We just purchased a home with an ingound pool and we are having troubled figuring out how to set the filter to vacuum well and also what positions control what water flow and suction. Nothing is labeled. Im not sure how old it is. The house was built in 99 but the pool was added after that. We are lost.

  3. Mathew. What is my valve control divwerter do, I opened it up there’s nothing in their. , need help

    1. If you have the full suction power of your pump pulling through just one of those elements that could suck your hand in and get you stuck, this is not probable but it can happen.

Leave a Reply

Your email address will not be published.

Recommended Resources

Why Choose a Slide Valve Over a Multiport?

Why Choose a Slide Valve Over a Multiport?

Hello and welcome to INYO Pools. Today we are discussing push-pull valves, also known as slide valves. The slide valve gets...
Read Now

How to Repair a Pool Return Jet Eyeball

In this guide, we teach you how to repair a pool jet return. This guide also works if you are switching...
Read Now

Replacing A Jandy Valve Diverter

October 6, 2016
Replacing A Jandy Valve Diverter In this video, we take a look at how to replace a three-way Jandy valve diverter...
Watch Now

How To Identify Pool Plumbing Lines & Valves

January 12, 2021

Pool Care Basics How To Identify Pool Plumbing Lines & Valves In this Pool Care Basics, we show you how to identify your plumbing lines and valves. This is useful if you’re not sure what each valve in your pool plumbing does, and if you’re looking to have a better understanding of how everything works.

Watch Now

Looking for pool parts?

Shop Motors Shop Filters Shop Pumps Shop Salt Systems Shop Lights Shop Cleaners
Copyright © 2024 INYOpools All rights reserved