Bead Receiver Kit (48" Section) - NL109

Model # NL109

  5 Average  

Details

Top

Model # NL109

Product Description

Enjoy the beautiful patterns available in beaded liners with our bead receiver. Beaded liners are not only beautiful, but are easier to install – no taking off the top seat! Simply purchase the correct lengths of bead receiver for your pool size – slip the receiver over the top of your pool wall and you are ready for a beaded liner. Each bead receiver is 48" long. Please contact us to determine how many lengths you will need for your pool size.

  • Converts your pool from an overlap-style liner to accept beaded style liner with ease
  • Simply install bead hanger on top of pool wall and you are ready for a beaded liner
  • Ample 48-in length to make installation easier
  • Sturdy PVC construction will not corrode
  • Makes liner replacement quick and easy

Top

?     Asked on 6/2/2018 by Jason

How many of these would I need for a 15x26 oval? Thank you
 Reply

A  Answered on 6/2/2018 by InyoPools Product Specialist Lennox H.

Hi, Jason. You will need 19 of these Bead Receiver Kit - NL109
 Reply


?     Asked on 3/18/2018 by Megan

Thank you for answering my question. I have another one before I order. Can you please tell me what other piece I would need, if any, to convert my overlap to a bead with rounded corners. It's not a perfect right angle. Thank you so much!
 Reply

A  Answered on 3/26/2018 by InyoPools Product Specialist Joe S.

Good afternoon, the Bead Receiver Kit (48" Section) - NL109 is flexible and would work for both round and oval pools.
 Reply


?     Asked on 2/23/2018 by Megan

Can I use this to convert my inground overlap liner to a beaded liner? It's 12 x 20. Thank you!
 Reply

A  Answered on 2/23/2018 by InyoPools Product Specialist Lennox H.

Hi, Megan. Yes, you will need approximately 14 of these Bead Receiver Kit. You will also need to purchase a Beaded liner. 
 Reply


?     Asked on 7/28/2017 by alabama

my pool caries a j-hook on to of liner now would like to use overlap line can I get a thin liner holder that will go in the small groove on top rail
 Reply

A  Answered on 7/29/2017 by InyoPools Product Specialist Lennox H.

Hi, Alabama. You will need to use either Liner Coping Strips with an Overlap liner. 
 Reply


?     Asked on 7/22/2017 by Rose

How many bead receivers will I need for a 18 round pool
 Reply

A  Answered on 7/22/2017 by InyoPools Product Specialist Alex V.

Rose, You will need 15 bead receivers for an 18' round pool. 
 Reply


?     Asked on 6/4/2017 by Tony

How many 48" beaded liner receiver pieces do I need for 24' round pool
 Reply

A  Answered on 6/8/2017 by InyoPools Product Specialist Lennox H.

Hi, Tony. You will need 19 Bead Receivers for a 24' pool.
 Reply


?     Asked on 6/22/2016 by

What is the width of this bead receiver?
 Reply

A  Answered on 6/22/2016 by InyoPools Product Specialist Patrick P.

This bead receiver measures 2-3/4" wide.
 Reply


?     Asked on 5/23/2016 by Jamie

I have a beeded liner 24 foot round above ground pool and it came away from the rim any suggestions? I cant pull it to put back in
 Reply

A  Answered on 5/28/2016 by InyoPools Product Specialist Alex V.

Jamie, If it's not too bad, I've seen some installers use hot water (poured on the liner) to help stretch it back into place.
 Reply


?     Asked on 3/13/2016 by Don

I have to replace an overlap liner. Can I use this to install a snap bead liner?
 Reply

A  Answered on 3/15/2016 by InyoPools Product Specialist Lennox H.

Hi Don, You will need the Bead Receiver Kit to install a Beaded Pool Liner or a Uni-Beaded Pool Liners.
 Reply


?     Asked on 5/26/2015 by Glenn

What is The Channel On The Bottom Wall That Holds The Wall Called?
 Reply

A  Answered on 5/26/2015 by InyoPools Product Specialist Dennis R.

Hi Glenn,  I believe you are referring to the base rail. See our quide on "How To Identify the Components of an Above Ground Pool".
 Reply


?     Asked on 5/3/2015 by Robert

Will this receiver kit take a j hook liner?
 Reply

A  Answered on 5/3/2015 by InyoPools Product Specialist Patrick P.

Hi Robert, A J-hook liner actually does not use a bead receiver as the J-hook portion of the liner hangs directly onto the pool wall.
 Reply


?     Asked on 8/9/2012 by Guest

Can I covert my overlap liner for my above ground pool to a beaded liner just by buying the bead receiver kit?
 Reply

A  Answered on 8/9/2012 by InyoPools Product Specialist Patrick P.

Yes, you can convert your overlap pool liner to a beaded pool liner for your above ground pool, by simply installing the bead receiver kit. The bead receiver kit affixes to the pool by just slipping on top of the pool wall. The beaded liner  will snap directly into the bead receiver track.
 Reply


?     Asked on 5/16/2007 by Guest

Does this bead receiver work for a Kayak rectangular above ground pool?
 Reply

A  Answered on 5/16/2007 by InyoPools Product Specialist Patrick P.

Yes
 Reply


Top
Difficulty

Est. Repair Time

4 to 8 hrs

Tools Needed

Screwdriver, small tool that came with the liner

beaded pool liner kept coming down

Written on 8/20/2018 by Guest

Noticed some of my bead receivers were chipped at the ends and some were stretched open wider then should be.. Pool liner would not stay on. Ordered new bead receivers. Had to take the water out of the pool, a lot of it was already out from liner falling. Took out the liner and smoothed out the sand. Took out all stretched, worn, cracked and chipped receivers. Put new ones in. Put liner back in and hooked to receivers. Filled pool back up.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)