Search by Keyword
or Part #:

     

Shop by Category:


Aurora LED Color Changing Light
Aurora LED Color Changing Light
Aurora LED Color Changing Light
(4 out of 5 stars)
(100%) 1 of 1 customer would recommend this product to a friend.
1 Review
5 star:
(0)
4 star:
(1)
3 star:
(0)
2 star:
(0)
1 star:
(0)
See All 1 Reviews
$189.99
Qty: Shipping Calculator
Product Specifications
Part #: NA412
Warranty: 1 year
    Back to Top
Product Description

This new Aurora color changing light installs directly into your pools return line so there are no holes to cut or reseal. The Aurora replaces the current return to insure proper water filtration with its directional flow water jet. It installs easily in 10 minutes or less on any new or existing above ground pool. With a flip of a switch your pool is bathed in white, blue, green, pink or turquoise light. The Aurora can be set on any light in its color spectrum or it can cycle through the entire spectrum for a “party effect”. Its bright LED lights will last over 100,000 hours and its low 12 volts is completely safe. The unit comes complete with light, transformers with color switch, 25' of cord and installation manual. ETL listed. Backed by a 1 year warranty .



Click Here for Aurora Owners Manaual

    Back to Top
Customer Reviews
Product: Aurora LED Color Changing Light
Average Rating: (4 out of 5 stars)
Recommended: (100%) 1 of 1 customer would recommend this product to a friend.
1 Review
5 star:
(0)
4 star:
(1)
3 star:
(0)
2 star:
(0)
1 star:
(0)
The Most Helpful Review
2 of 2 people found the following review helpful:
(4 out of 5 Stars) Good light
Reviewed By: Shaun from New Hampshire (5/21/2010)
Product: Aurora LED Color Changing Light
Pros: Easy to install, colors and changes are great
Cons: Hard to get a good seal on the pool

We previously had the Pentair Color Aqualuminator light which we loved the colors and intensity, but didnt like the fact the bulb sits in the return opening which significantly reduced return flow. So we decided to go with the Aurora LED Color.

This is a well designed product. The power cable sits (protected) in the return opening and not the light itself which means we get full flow return pressure.

Extremely easy to install the light - it really was about 5 minutes. The silicone gaskets that come with the light have a notch in them to allow easy pull over the power cable. Unfortunately this also makes getting a good seal difficult but we got there (I think I will replace these next year with normal gaskets - no biggie). The LED lights are powerful enough to light the whole pool (24ft), much more color saturation than normal halogen covered white bulbs. Nice color changing modes on a couple of the settings. Looking forward to using this at night.

Was this review helpful to you? Yes No
Read All Reviews
    Back to Top
Questions customers have been asking about this product:
Q: How do you control this light?

A: This light has an on/off switch on the transformer and the light is controlled through this switch. When you first turn the switch to on the light is in the White light mode, if you then switch the light off then on again the light will be in the color changing mode. Once the light is in the color changing mode you can pause the light on a color by flipping the switch off then on.


Q: What size pool will a single light illuminate?

A: According to the manufacturer, one Aurora light will illuminate round pools up to 24 ft in diameter.  For oval pools, they suggest using two lights.


Q: Will I still be able to use my Polaris 65 above ground cleaner?

A: According to the manufacturer you will still be able to use your cleaner. The return jet on the light is threaded.


Q: What material is the clear lens made of?

A: The lens on this light is Poly Carbonate (Plastic Like Material)


    Back to Top

Ask us a question regarding NA412