Model # PL9836
Warranty 1 Year
Manufacturer Code 25677-330-000
Alternate Part #'s 27-3223, CMP25677-330-000, CMP25677330000
Hit the right note with this Waterfall light Accent
Our Lighted Waterfalls are the latest in LED Pool Water features. The LED strip is built into the unit placing the light as close to the water as possible. Our design makes a separate light source unnecessary.
Specs:
Note: One Waterfall Remote Kit is required to power our LED Pool Waterfalls. One remote kit will power any combination of our LED Pool Waterfalls up to 20 feet of combined width. The components of the waterfall remote kit are shown below.
Is this controller able to supply any other led pool lighting. And what all comes with this waterfall for $561.
Reply
One Waterfall Remote Kit is required to power the Brilliant Wonders LED Pool Waterfall. One remote kit will power any combination of Brilliant Wonders LED pool waterfalls up to 20 feet of combined width.
Reply
Can CMP LED waterfall tie into Hayward OmniLogic Automation System And sync with Hayward LED color lights? Thanks
Reply
Hi Jerry, The CMP LED Waterfall will not be able to sync with Hayward LED lights but can be turned on/off by the OmniLogic Automation System.
Reply
does this work with sheer descents
Reply
This is classified as a sheer descent waterfall so this would be the sheer descent and LED lighting. If you already have the sheer descent waterfall then we don't have an option to add lighting after installation.
Reply
Does thie 36 inch lighted waterfall come in larger widths? I am looking for at least a 60 inch with lights.
Reply
Hi. I just bought the 60”, 36” and 18” waterfalls – and plan on installing them all on an 8’ x 8’ wall (18” on top/60” on bottom); the water will drop into a small “pond” before going into the pool. Now that I’ve read the instructions, looks like I’ll need a pump that will put out 142.5 gallons per minute – much more than expected. Can you give me any recommendations on how to proceed/pump size I'll need, etc? I really want to use all 3, but maybe that isn’t feasible. Please advise! Thanks
Reply
Hi, Mo. You will first need to calculate the TDH of the waterfall circulation system. The 60" requires 60 GPM, 36" 36 GPM and 18" 18 GPM. You can then choose from one of our Waterfall Pumps.
Reply
