$10.78

Qty:

Details

Top

Part # 4822-04

Manufacturer Code 364

Dimensions 6-3/4" ID, 3/16"

Alternate Part #'s 47-0366-47-R, 47036405, 47036447R, 47046404, 5535101 SEA, 90-423-5364, GM600F, GMX600F, HAY0511867, O-263, O263, SPP-3640, AEQO263, ALDO-263-0, APCO2441

Product Description

O-RING, 6-3/4" ID, 3/16"

Common size o-ring used on various pool pumps, filters and valves.  Cross-references to Hayward part number GMX600F for the Pro Series sand filters, Max-Flo II pump, Swim Pro filter and E-series filter among others.  Click on the "Parts" tab above for a complete list of products that use this o-ring.

Frequently Bought with O-rings

Magic Lube O-ring Lubricant

Top

?     Asked on 6/16/2015by Herb

My pump is leaking in the area of this O-ring. Is there a larger O-ring that would solve this problem or another solution?
 Reply

A  Answered on 6/17/2015 by InyoPools Product Specialist Joe S.

I would inspect for a crack. also have you applied lube to the oring to create a nice seal.
 Reply


?     Asked on 5/9/2016by Bruce

Will this part fit model #S244T ?
 Reply

A  Answered on 5/10/2016 by InyoPools Product Specialist Matt S.

Yes, the 4822-04 o-ring will fit the Hayward Pro Series S244T Sand Filter.
 Reply


?     Asked on 5/27/2016by Dave

Does this o-ring fit the Hayward swim pro c100 cartridge system?
 Reply

A  Answered on 5/27/2016 by InyoPools Product Specialist Patrick P.

Hi Dave, this particular o-ring does not fit the Swim Pro Cartridge system, however we do carry the correct Swim Pro Tank Body O-ring here you may also find the Parts Diagram for the Swim Pro Cartridge System helpful.
 Reply


?     Asked on 9/17/2016by Jim

Could you please tell me if this will fit a 22 inch sand filter with a L44311 on a label on the bottom of the tank?
 Reply

A  Answered on 9/28/2016 by InyoPools Product Specialist Alan M.

Unfortunately, I have no information that comes up with the L44311 number you provided. If you have any additional information, please reply to this and I will be happy to assist you further.
 Reply


?     Asked on 3/23/2017by Inyo Visitor

having trouble getting this o ring to slide to slide together with the body and motor any suggetions it goes together fine without the o ring but water leaks out
 Reply

A  Answered on 3/24/2017 by InyoPools Product Specialist Scott W.

What is the model of the pump or filter that you are trying to stop from leaking?
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

I live on an island in the southern Carribbean and could not find parts for my sand filter..

Written on 10/26/2020 by Guest

This "O" ring is critical for my Jacuzzi sand filter and I could not find it anywhere. INYO Pools came to my rescue and I am now back to filtered water.
Thanks INYO!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

2     0

The O ring compresses over time and the shape changes.

Written on 7/6/2018 by Guest

If you remove the head for any reason it is best NOT to remove the o ring. This is because when you put it back on you may twist it slightly and may not seal as well. If the O ring is deformed I suggest replacing it.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.86  out of 5 stars)
21 Rating
5 star:
 
(18)
4 star:
 
(3)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews