$12.87

Qty:

By Aladdin


Details

Top

Part # 4820-02

Manufacturer Code O-429

Dimensions 19-7/16" X 1/2"

Alternate Part #'s DE2400K, DEX2400K, DEX360K, O-429, O429, 90-423-1429, AEQO429, ALDO-429-0, APCO2262, SPG-601-1195

Product Description

Tank body o-ring for the following Hayward pool filters:  SwimClear, Super Star Clear, Pro Grid DE and Micro Clear DE.  This is a replacement for the original Hayward part number DEX2400K.

Frequently Bought with O-rings

Magic Lube O-ring Lubricant

 

Top

?     Asked on 11/4/2014by Beto

sorry I mean Magic lube nor glue.......how often you can do that. i mean over the tank O ring. the when clean the filter you removed the half of the tank cover. I mean the big gasket big O ring. assembly the entire tank.
 Reply

A  Answered on 11/5/2014 by InyoPools Product Specialist Brian M.

Ideally, every time you open the tank to clean or inspect you should wipe off the old lube and put new on. 
 Reply


?     Asked on 1/13/2016by Cathy cannedy

will this fit Hayward c5025
 Reply

A  Answered on 1/13/2016 by InyoPools Product Specialist Megan C.

Hi, Cathy. Yes, the 4820-02 is the correct part number for the filter tank O-Ring, that is used on the Hayward SwimClear Cartridge Filter Model C5025. I would best recommend purchasing Magic Lube O-ring Lubricant 1 Oz. Teflon, to help seal and protect the O-Ring.
 Reply


?     Asked on 4/15/2016by Rob Tomfoed

Is this gasket steel reinforced? If not do you carry an O-ring which is inforced for Hayward 4025 canister?
 Reply

A  Answered on 4/15/2016 by InyoPools Product Specialist Lennox H.

Hi Rob, The Reinforced Gasket for the Hayward C4025 is p/n DEX2422Z2.
 Reply


?     Asked on 4/25/2016by JUan Valadez

I NEED A SEAL FOR MY HAYWARD PRO-GRID VERTICAL DE-6000
 Reply

A  Answered on 4/25/2016 by InyoPools Product Specialist Lennox H.

Hi Juan, This Tank O-ring will fit the Hayward Pro-Grid DE6000 filter. You can locate other parts for that model filter via the Hayward Micro Clear D.E. Parts.
 Reply


?     Asked on 5/11/2016by Bob

Does this O-ring fit a Hayward Pro-Grid DE2420?
 Reply

A  Answered on 5/11/2016 by InyoPools Product Specialist Hector F.

Yes that o ring will work for that model filter.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Pliers

Filter was leaking

Written on 5/30/2021 by Guest

Took the top half of the filter tank off and removed the old O-ring. I replaced it with the new O-ring and applied a lube grease on the new O-ring. The put the top half of the filter tank on and secured it with the clamp.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Socket Set

1     0

Leaking filter

Written on 7/9/2019 by Guest

The old o-ring was slightly loose due to age so tank leaked a bit at the junction. New one was perfect fit and solved the problem.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Socket Set

Air Sucking and Process of Elimination

Written on 4/7/2019 by Guest

Took off the top of the filter and installed ring then put top back on.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Adjustable Wrench

1     0

water leak at mid body of filter DE-Le -48504 (Hayward 4802, 48sq,8grid)

Written on 5/29/2018 by Guest

Installed with extra amount of silicon lube with care as done many times in previous years The generic 0-429 ring
diameter is correct but the thickness is under size. Carefully retried a few times but would not seal, water flowed out the side. My filter is 7 years old. Is a thicker o- ring available? Are generics inferior?

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.9  out of 5 stars)
28 Rating
5 star:
 
(26)
4 star:
 
(1)
3 star:
 
(1)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews