By Custom Molded Products
Part # 34-605-1035
Manufacturer Code 27210-110-900
Alternate Part #'s CMP27210-110-900
This is the Ninja whirlpool bath pump from CMP. Used by many tub makers over the years. 115v, 10.0 Amps, comes with air switch and 36" Nema cord. Also available in other amperages.
| Length | Width | Discharge Height | Overall Height |
| 13.64" | 5.35" | 6.75" | 7.28" |
| Manufacturer | Custom Molded Products |
| Pump Model | Ninja |
| Speed | 1 Speed (1-Spd) |
| Motor Voltage | 115v |
| Drain Plug Location | None |
| Suction Style | Bottom |
| Suction Connection Type | Male Buttress Thread (mbt) |
| Suction Pipe Size | 1-1/2" |
| Discharge Style | Center |
| Discharge Connection Type | Male Buttress Thread (mbt) |
| Discharge Pipe Size | 1-1/2" |
| Motor Amperage/Wattage | 10.0A |
does this pump turn off in 10 min and then I can turn it back on? thank you.
Reply
Hi, Robert. This pump will run as long as it is powered and is activated by an air switch. However, if you bypass the air switch it could be controlled by a timer that will allow it to run for 10 minutes at a time.
Reply
