Part # GOKIT3
Alternate Part #'s 65003, GO KIT 3, PL1003, SPXHKIT3, APCK1024
Standard tune up kit for the Hayward Super Pump includes the shaft seal and all o-rings, gaskets and lubricant.
We highly recommend replacing the shaft seal, o-rings and gaskets when replacing your motor. If you use your old shaft seal, it will not mate up properly with the new motor and may leak.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
For more Pool Pump Motors
Click here for Saltwater Pool Tune Up Kit (GOKIT3SALT)
I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
Reply
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
Reply
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
Will the GoKit3 work with saltwater pools?
Reply
The Tune Up Kit Hayward Super Pump for saltwater pool is GOKIT3SALT.
Reply
I have a model C48K2n143B1
SP-1607-Z1-M
Which seal kit do I need?
Reply
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set
I bought this kit to fix my pump. I also bought a new motor. Inyo's YouTube has some great videos on how to do the repair. It was relatively easy. I didn't need a new pump, just the motor, but while everything was apart it was time to upgrade the rest of the elements. Turn off the electricity, disconnect the wiring, remove the bolts holding the motor to the pump housing, replace the parts and reassemble. This was the first time I've done this and the whole thing took about 2 hours.
Less than 1 hr
Socket Set
Disconnected the pump and replacement the rings. It was self explanatory and everything fit exactly where the old ones came off. The lubricant supplied with the kit was enough to use for the entire kit. Inyoupools has youtube videos or videos right on their website to help walk you through step by step.
Less than 1 hr
Screwdriver, Just to get the old seals out
1 0
We replaced the motor, but didn’t have to replace the debris basket. However, at the suggestion of a product specialist, we did go ahead and replace the seals on anything adjacent to the new motor. We are glad we did! The parts arrived as described and fit well.
Less than 1 hr
Screwdriver, Nut Drivers, Pliers, Socket Set, Adjustable Wrench
Shut off power remove plastic cover take four bolts off place hex wrench to hold shaft remove impeller remove shaft seals Used small screwdriver to push washer part of seal clean with dry rag lube using glove place parts back together change out gaskets reassemble and reconnect. Prime pump with water in screen side Turn on pump-no leaks Watched an old U tube video before starting Done in less than hour!
1 to 2 hrs
Nut Drivers, Pliers, Wrench Set, Bearing puller. Multimeter to check motor.
2 0
Replaced bearings, seals and capacitor. I got a 1hp Superpump for free that was thought to be junk. The main issue was very bad bearings especially the front one likely due to an old shaft seal. Because of this the capacitor blow out also. Total repair time was about an hour and cost was $70. Now a have a perfectly running spare with my current pump ~10 years old and getting a little load.
1. Had the necessary, basic hand tools and bearing puller (if you don’t, HF has them cheap an auto parts store will loan them).
2. Disassemble per the Inyopools video. These are pretty standard motors so not hard to figure out.
3. Cleaned and check motor with multimeter, pressed new bearings on.
4. Re-assembled motor per the video.
5. Replaced all the seals. Save the water slinger because that won’t be in the kit.
6. Checked adjustment on v-switch. This is important on the older motors. Inyopool has a video on this too.
7. Replaced start capacitor.
8. Successful test and high-5’s all around.
Less than 1 hr
Screwdriver, Nut Drivers, Wrench Set, Tongue and groove pliers
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
Less than 1 hr
Screwdriver, Socket Set
Less than 1 hr
Screwdriver
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
1 0
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set
I replaced my pool motor and INYO recommended this Tune Up kit to replace the seals in the pump. The kit had everything I needed including a small tube of silicon lubricant. All parts were exact replacement and fit perfectly. You simply remove the old gaskets and follow the written instructions and or watch the many videos that INYO Pools makes for your viewing and then ease of performing the job, without having any experience. This was easier than I had anticipated. One thing that was a easy but a little tricky is the shaft bearing is in two halves and they have ceramic faces that must mate. One half is white ceramic and that is easy to see and is well described and highlighted in the videos, but like a lot of things when you're looking at the parts it's not black and white 100% which side of the black ceramic 2nd half of the shaft bearing is the shiny side. You don't want to touch the ceramic surface as the oil from your fingers might cause the bearing to burn... after inspecting closely I was able to figure it out.
Less than 1 hr
Screwdriver, Nut Drivers, Pliers, Socket Set
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set, Wrench Set
Remove 4 exterior Motor to pump bolts
Remove next 4 bolts on bezel
Loosen rear metal cover screws
Remove impeller by securing the driveshaft nut and turning the impeller
Remove next two covers attached to motor
Turn off breakers
Remove electrical
Replace gaskets, seals and impeller spring
Reassemble in reverse with new motor
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
1. Opened pre-pump strainer basket, and replaced rubber seal in housing top (after lubricating with kit-supplied lube);
2. The following were all replaced after the motor/pump assembly had been removed from the pump housing, and disassembled, per instructional video available online (after being lubricated, of course!):
- Pump diffuser seal;
- Impeller housing-to-motor mount seal;
- Shaft seals in housings (2).
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench
1. removed old motor from pump housing
2. bolted on new motor to pump housing, as well as replacing old seals with new ones
3. attached impeller and diffuser to motor/pump housing
4. attached new motor/pump housing to filter.
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set
Ordered a new motor from INYO pools. I flt I should get the tune up kit to install it. It was a wise choice as it comes with all the seals needed to replace the motor Installation went smooth.
First took the pump off the filter base. then you separate the motor from the basket. Then remove the impeller and spring bushing. Replace the seal to the basket. The impeller was also worn so I replaced it as well. The motor shaft has a flat section the wold the shaft while you replace the impeller. Reassemble the pump section, note where it is marked top. Put the assembled back on the base. Prime the pump then start it up.
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
2 0
Pulled everything apart, the seal would not seat. I cracked it. Watched INYO video on replacing pump seals, learned error of my ways, ordered new seal, pump up and running. When am I ever gonna learn??????
1 to 2 hrs
Screwdriver, Socket Set, Adjustable Wrench
1 0
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Adjustable Wrench
2 0
1 to 2 hrs
Pliers, Socket Set, Wrench Set
1 to 2 hrs
Screwdriver, Pliers, Open end wrench
1 0
First I turned off the breaker to remove power. Then I removed the wires from the pump and removed the 4 bolts. That let me take the pump from the front end where the basket and plumbing is connected.
I brought the pump to the workbench and removed the impeller by placing a wrench on the rear of the shaft and turned the impeller until it loosened up enough to remove it. After removal I cleaned up the shaft and removed the seal with a rubber mallet and screwdriver.
My pump was leaking for quite sometime so I had to remove some rust from the underside of the pump and used spray paint to give it some protection. I installed the new seal with care not to touch the ceramic pieces. Next I put the impeller back on the shaft and put the front end which snapped back on.
I then returned to my pump location and fastened the pump back with the bolts I removed. I reconnected the electrical, turned the breaker back on and filled the basket area with water to start the siphon. Within minutes the pump was back working again. This process took me about an hour. My pump is under a deck so it took a little longer to get to it.
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
We diagnosed that it must be the motor as, the pump would pump but then trip the circuit breaker. I talked with helpful sales people on the phone and ordered a replacement motor for the Haywood Super Pump. My only mistake was not mentioning that we have a salt water generator and we should have ordered the heavier duty shaft seal, but lessons learned.
Less than 1 hr
None
Less than 1 hr
None
1 1
There isn’t much step by step to give on this item. I replaced the seals one by one as I disassembled the old motor and put the stuff on the new motor. The gasket for the pump lid was very easy to put on as well as the other ones. The only one I had an issue putting in was at the back of the pump that connected the motor to the pump because it would want to pop out as I went around. Eventually I got my fingers spread out far enough to hold the gasket and got it in.
1 to 2 hrs
Screwdriver, Nut Drivers
Just replaced pump with a Century 1hp. pump. The greatest part of this evaluation was the fantastic support I received from the on-line videos by InYoPools.com and their friendly and helpful staff. Not only the best prices but best service to boot.
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Wire stripper/crimper
2 0
I purchased the correct motor from INYOU and it arrived days sooner than expected. I took the recommendation and ordered the seal kit as well. Finally on Fathers Day I had the time to tackle this daunting project. Always wary of anything electrical, I took every precaution I could to not electrocute myself with my son present. With everything checked and double checked the moment of truth arrived. I three the breakers on and then threw the switch on the timer box and........SUCCESS! The motor turned and the pump started circulating the water. Awesome feeling of overcoming a fear of electricity and knowing I did it right the first time. The tutorials from INYO were perfect and I saved over $ 330.00 doing it myself.
Less than 1 hr
Screwdriver, Socket Set
1 0
Removed pump by disconnecting power removing mounting bolts, impella cover and impella. Replaced pump. Tested same before installation and it didn't work. Contacted customer care and they sent me a new one in two days. Installed same after installing new gaskets upplied in the Super Pump tune up kit and new ceramic bearing
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench
1 0
$245.99
$211.99
$207.70
The Most Recent Reviews
(5 out of 5 stars) Total seal kit for haywood pool system
Reviewed By: Joe C. from Orlando FL ()
Pros: Complete seal package
Cons: none
Was this review helpful to you?
(5 out of 5 stars) Worked well
Reviewed By: poolman from Wilmington ,NC ()
Perfect replacement for old parts, smart to do at motor replacement
Was this review helpful to you?
(5 out of 5 stars) Exact parts needed to replace gaskets, great sealing kit
Reviewed By: Charlie W. from North Augusta, SC ()
I used the helpful videos on YouTube to replace the gaskets on our in ground pool now I can keep from replacing our pool pump by changing gaskets on a regular basis. INYOPOOL made our purchase easy and first rate products without paying the retail price. I can't think of a better place to purchase replacement pool parts because of the savings and video you can watch and perform step by step instructions on how to replace and repair our pool pump.
Was this review helpful to you?
(5 out of 5 stars) Pump Seal Kit
Reviewed By: Mike from Lancaster, Pa. ()
Pros: Perfect fit
Cons: lack of instructions
All seals fit perfectly. I was glad it was a kit and I did not have to buy individual seals
Was this review helpful to you?
(5 out of 5 stars) Super simple install
Reviewed By: sjc123 ()
I took me about 1 hour to change the motor out and replace all the gaskets. You can't screw this up. Very simple.
Was this review helpful to you?
(5 out of 5 stars) Tune up was easy
Reviewed By: Jeff A. from Maryland ()
Pros: worked great stop the leak.
Cons: None
Very clear directions. took all of 20 minutes. $400 saving over buy a new pump. I say it's was easier than changing the oil in your car.
Was this review helpful to you?
(5 out of 5 stars) Easy Tune Up
Reviewed By: JOHN F. from Holliston, MA ()
Pros: easy to complete
Cons: none
The tune up kit in combination with the how to guides on your web site made this a snap to complete. I had my reservations, being that the pool was in use at the beginning of the season, but the kit and easy to follow instructions had me complete the tune up in less than an hour, and I had never done this before. Great web site and excellent company to do business with...thanks!
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Eddie C. from Belton, SC ()
All parts in the kit fit perfectly. Parts were very simple to install and all is working great.
Was this review helpful to you?
(5 out of 5 stars) tune up kit
Reviewed By: Kenneth W. from Indianapolis In ()
Exactly what I needed to properly install my new motor on the pool pump. Without these necessary gaskets and seals I could have installed but would have been disappointed when things went wrong in the near future.
Was this review helpful to you?
(5 out of 5 stars) Hayward tune up kit
Reviewed By: pool shark from ELIZABETHTOWN, KY ()
Pros: Quality and Price
excellant quality and instructions, even came with magic lube, was much easier to install than anticipated
Was this review helpful to you?
(4 out of 5 stars) What I wanted
Reviewed By: Patrick H. ()
Timely service. Good products. The seal for the impeller, the indents did not line up with the ones on the old impeller. Used the old one.
Was this review helpful to you?
(5 out of 5 stars) excellent tune up kit
Reviewed By: Gay G. ()
web sight was easy to use and locating parts was also easy. so pleased to find this kit was easy to instsll. great experience.
Was this review helpful to you?
(5 out of 5 stars) Great product
Reviewed By: Kassandra H. from Illinois ()
Great product. Exactly what I needed. Fit perfectly.
Was this review helpful to you?
(5 out of 5 stars) Pump repair kit
Reviewed By: Bill E. from Bloomington, IL ()
Parts were super easy to find and identify on the web site. They arrived in 3 days and fit perfectly. Solved my problem.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Terry B. from Mantachie, MS ()
kit was as advertised
Was this review helpful to you?
(5 out of 5 stars) Good Suggestion
Reviewed By: Carla S. from Yutan, NE ()
Pros: easy to use
Cons: none
I recently replaced the motor in our swimming pool pump. The tune up kit had all the accessories I needed to do the job completely and well.
Was this review helpful to you?
1 1
(5 out of 5 stars) Very good
Reviewed By: Ann H. ()
Replaced all these and pump doesn't leak anymore.
Was this review helpful to you?
0 1
(4 out of 5 stars)
Reviewed By: JIm M. from Philadelphia,Pa ()
Cons: no installation instructions
It would be nice if u sent a copy of installation instructions with this product
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Willy Dog ()
Product was as described and delivery on time.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Kenneth C. from Easton, MD ()
Pros: everything i needed
Was this review helpful to you?
(4 out of 5 stars) replacement gaskets
Reviewed By: Jim F. from boston ma ()
Pros: all the parts and they fit too
a definite to do when replacing any pump or motor parts...
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Brian H. from Staten Island, NY ()
Easy access
Was this review helpful to you?
(5 out of 5 stars) Great experience
Reviewed By: Jeff W. from Pinson, AL ()
Pros: Shipped quickly, well packaged
Cons: none
Shipped quickly, fit was perfect, will buy again from this company
Was this review helpful to you?
(5 out of 5 stars) Complete Kit
Reviewed By: Harry F. from Oxford, MS ()
This was exactly what my pool pump needed! Stopped all leaks and easy to replace all these parts with a minimum of knowledge and tools.
Was this review helpful to you?
(5 out of 5 stars) Hayward Seal Kit
Reviewed By: Dennis J. from New Albany, MS ()
Pros: quality and fit
Cons: none
Great fit. decent price. A must when replacing the motor.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Colin A. from Port Townsend, WA ()
wonderful service
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: James D. from Hawley, PA ()
exactly what we needed.
Was this review helpful to you?
(5 out of 5 stars) must have for pump replacement
Reviewed By: my own pool dr from Tennessee ()
This is a must have when you replace your pump. Good fit, easy to install.
Was this review helpful to you?
(5 out of 5 stars) Just as described
Reviewed By: Barry M. from Baton Rouge, LA ()
Kit was the correct one for my pump as told to me by salesperson. Fast easy replacement and quick delivery.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: William C. from Woodbury, CT ()
motor/kit went together as per documentation, no problem.
Was this review helpful to you?
(3 out of 5 stars) Superpump flub
Reviewed By: Jerry S. from Orion, IL ()
Pros: motor seal
Cons: rubber seals
I purchased this kit to facilitate the installation of a new pump motor. The pump seal kit was perfect. I do think that a installation instruction sheet would have been helpfull. The rubber seals did not fit. The strainer seal was about 1 1/4 inches too large, and the disfuser seal was about 1/2 inch too large. My super pump is only 3 years old, so I believe the manufacture did not change the dimensions...
Was this review helpful to you?
(4 out of 5 stars) swimming pool parts & kits
Reviewed By: Frank H. from mississauga, ON ()
Pros: quick
Cons: high shipment fee
received the purchased item quite quickly, somehow, the extra-charge for the shipping fee is high, almost 60% of the item value
Was this review helpful to you?
(5 out of 5 stars) Solved the problem.
Reviewed By: Tom M. from Jamestown, NC ()
Easy to install.
Was this review helpful to you?
(4 out of 5 stars) Take the Guesswork out
Reviewed By: Nathan H. from Wichita, KS ()
Tune Up Kit worked perfectly. Would definitely purchase again next time.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: James T. from Riverdale, UT ()
Just what I needed and arrived when it was supposed too. The costs even including shipping saved me over 30% over what the supply sources in Utah gouge you for.
Was this review helpful to you?
(5 out of 5 stars) tune up kit
Reviewed By: Stacy B. from minneapolis, MN ()
Pros: full kit with everthing needed
was just what I needed for my hayward super pump
Was this review helpful to you?
(3 out of 5 stars) Directions for install
Reviewed By: Ronald S. from Mooresville, NC ()
The only problem is that the gaskets came with no instrutions about the ceramic disk not being touched by the hands. I thankfully read a previous review and on site instructions that mentioned the fact that the disk should not be touch with the bear hand.
Was this review helpful to you?
(5 out of 5 stars) tune up kit
Reviewed By: Michael B. from Albany, NY ()
correct parts and good advice to replace this when replacing the motor
Was this review helpful to you?
(5 out of 5 stars) Great kit
Reviewed By: Julian B. from Liberty Township, OH ()
kit fitted up perfectly - no issues - good clear instructions on line
Was this review helpful to you?
(4 out of 5 stars) Quality Product
Reviewed By: Bruce H. from Irmo, SC ()
Pros: Quality Product
Cons: I still have a leak in my pump. I need to troubleshoot further.
The kit was exactly what I expected and I received it within a few days of my order. It was easily installed.
Was this review helpful to you?