FAN MOTOR 1/3 HP 825 RPM 208/230 OEM MOTOR - ECS3114

$290.99

IN STOCK
FREE SHIPPING

Part # ECS3114

By Aqua Cal

  5 Average  

Details

Top

Part # ECS3114

Alternate Part #'s APLECS3114

Product Description

Your Source for AquaCal Heat Pump Parts - INYOpools.com

Top

?     Asked on 5/23/2020 by Matt Walsh

Looking for a replacement condenser fan motor for an Aqua Cal 120ARDE, will this fit my unit?
 Reply

A  Answered on 5/26/2020 by Aqua Cal

Good Morning Matt, Hope you are doing well. This motor should be fine for that older Heatwave model but I cannot be 100% sure without the full model number. Please feel free to call us at 727-823-5642 with any questions. Thanks, Robert Brown AquaCal Tech Support
 Reply


?     Asked on 5/6/2020 by Juan Vazquez

is the ECS3114 the right part for Model 166ARDSBMN ? the motor just humms.

 Reply

A  Answered on 5/7/2020 by Aqua Cal

Good Morning Mr. Vazquez, Hope you are doing well. The proper part number for the SQ166 fan motor is the ECS0095. You will also need the ECS6052 fan capacitor. INYO can supply you with further details. Thanks, Robert Brown AquaCal Tech Support
 Reply


?     Asked on 4/25/2020 by Joe

Can you confirm that this is the correct replacement for the model 110AHDEBNA? Currently when I turn on the pump and give the fan a little nudge, it will spin and the water is heated for about an hour until it eventually stops. After which I get the FS error since the fan isn't moving. Attached the best photo I could take.

 Reply

A  Answered on 4/28/2020 by Aqua Cal

Good Morning Joe, Hope you are doing well. The ECS3114 is the correct fan motor for the H110 unit you have at site With the fan running it heats up & then stops when an internal thermal overload trips out. You will need to replace it to fix this issue. Thanks Robert Brown AquaCal Technical Support
 Reply


?     Asked on 4/25/2020 by Joseph Cunetta

it looks like this is my solution as well, however is .4 hp equal to 1/3 horsepower?
 Reply

A  Answered on 4/28/2020 by Aqua Cal

Hi Mr. Cunetta, Hope you are doing well. The 0.4 HP is more powerful than the 1/3 & slightly less than 1/2 HP. Thanks, Robert Brown AquaCal Tech Support
 Reply


?     Asked on 4/15/2020 by Richard Sterling

The fan on the pool heater will not run , if you give the fan a spin before turning on the unit it will pickup and run for 20 min making heat. Then fan stops and the compressor continues to run than compressor stops. I replaced the start up capacitor no change. The unit is Aqua cal Torpical T115B-A 1/4 HP fan ser no 1004202-102 New Fan ?
 Reply

A  Answered on 4/16/2020 by Aqua Cal

Good Morning Mr. Sterling, Hope you are doing well. This sounds like the motor is heating up & tripping the internal overload. The fan will need to be replaced, but the correct part number is the ECS3115 - MOTOR,FAN 1/4HP 1075RPM C W. INYO Pools can help with that part. Thanks, Robert Brown AquaCal Tech Support
 Reply


?     Asked on 8/21/2019 by John M Custalow

AQUA CAL HEAT WAVE - SQ110 - 110AHDEBTJ (MODEL #) FAN MOTOR SEEMS THE FAN MOTOR HAS STOPPED THEY JUST REPLACED THE CAPACITOR AND CONTROL PANEL ON THE UNIT DO YOU HAVE A MOTOR THAT WILL FIT - THANKS!

 Reply

A  Answered on 8/26/2019 by Industry Professional

 The replacement fan motor for this unit is part number ECS0095. This fan motor needs a new 10 microfarad fan cap, part number ECS6052
 Reply


?     Asked on 6/10/2019 by Richard W. Carpenter

looking for a fan motor for an Aqua Heat LS mod MBP-00A serial YA2292 Hope you can help me thankyou
 Reply

A  Answered on 6/11/2019 by Aqua Cal

Good Morning Mr. Carpenter, Hope you are doing well. Unfortunately, we did not build the Aqua Heat units and we have no access to their parts or the rating to their parts. If you can provide me info from the motor such as the RPM, blade rotation & HorsePower, I may be able to find a substitute. Thanks Robert Brown AquaCal Tech Support
 Reply


?     Asked on 11/9/2018 by Ron Tellefson

I’m looking for an Aquacal condenser fan motor # 3114. Is this product available? Ron
 Reply

A  Answered on 11/9/2018 by InyoPools Product Specialist Lennox H.

Hi, Ron. Yes, this ECS3114 is available. 
 Reply


?     Asked on 6/2/2018 by Larry

I have a aquacal heatwave H75 . Serial# CTA A40424-A97. Need a condenser fan motor. 230 volts 1/5. H.P 825 RPM. Will this work??
 Reply

A  Answered on 6/12/2018 by InyoPools Product Specialist Joe S.

Yes the ECS3114 will work with the HeatWave75
 Reply


?     Asked on 5/27/2018 by

Is this the correct motor for AT120 model 120AHDEWNA heat pump? Thanks.
 Reply

A  Answered on 5/28/2018 by InyoPools Product Specialist Lennox H.

Hi. Yes, this Fan Motor - ECS3114 is the correct replacement for your model. 
 Reply


?     Asked on 4/27/2017 by Richard Jowsey

Hi I have a T100 pool heater 3 phase. I fan hums and is free but will not start, struggling to start. All phases are available. Would this be the Capacitor?
 Reply

A  Answered on 4/27/2017 by InyoPools Product Specialist Scott W.

That does sounds like the capacitor. I recommend giving AquaCal a call so they can provide the correct replacement capacitor for your fan motor.
 Reply


?     Asked on 4/25/2017 by Richard Jowsey

My fan motor will not rum. It just hums. I suspect the capacitor has failed. Can these be bought as a spare part?
 Reply

A  Answered on 4/25/2017 by InyoPools Product Specialist Scott W.

That replacement capacitor is most likely part number ECS60500, but I recommend giving AquaCal a call to confirm that is the correct capacitor for that fan motor.
 Reply


?     Asked on 11/1/2016 by Jerome Sims

Which fan motor do I need. Model # ATS15000A_A Serial # 1023275-E03
 Reply

A  Answered on 11/2/2016 by InyoPools Product Specialist Scott W.

Unfortunately, I do not have any information for that, but for that size of heat pump I would think it would need a fan motor that puts out about 1100 RPM. I would recommend giving AquaCal a call at 727-823-5642 to confirm the correct fan motor for that model.
 Reply


?     Asked on 7/1/2016 by JACK

will this fit a model 135ahdebtj
 Reply

A  Answered on 7/5/2016 by InyoPools Product Specialist Lennox H.

Hi Jack, The ECS0056 motor is the correct replacement for the 135AHDEBTJ unit.
 Reply


?     Asked on 8/19/2015 by James

is this the correct fan motor for Aerotemp by Aquacal model #AT12000A-A, serial #1009026-F02?
 Reply

A  Answered on 8/21/2015 by InyoPools Product Specialist Lennox H.

Hi James, The 1/3 HP 825 RPM 208/230 Fan Motor (ECS3114) would be the correct fan motor for the AquaCal AreoTemp AT12000A-A Heat Pump.
 Reply


?     Asked on 4/29/2015 by Guest

Will the ECS3114 be the correct fan motor for the H120?
 Reply

A  Answered on 4/29/2015 by InyoPools Product Specialist Robert M.

The ECS3114 will be the correct fan motor for the AquaCal H120.
 Reply


?     Asked on 1/6/2015 by frank

What is the correct replacement fan motor for AquaCal model Heatwave H155?
 Reply

A  Answered on 1/7/2015 by InyoPools Product Specialist Robert M.

Hello Frank - The ECS3114 is the correct fan motor for the HeatWave H155
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)