$699.00

Qty:

By Hayward Pool Products


Details

Top

Model # W3T-CELL-9

Alternate Part #'s T-CELL-9, TCELL9, TCELL925, W3T-CELL-9-SWP, W3TCELL925, HAYW3T-CELL-9, HPPW3TCELL9, W3TCELL9

Product Description

Replacement Turbo Cell for AquaRite 25,000 Gallon pools. Comes with 15' of cable and a 3 year warranty. This cell requires that you have a Power Supply with Software Revision 1.50 or higher

Product Specifications

Treatment Capacity:
25,000 gal.
Warranty:
3 yrs
Type:
T-CELL-9
Manufacturer:
Hayward
Model:
AquaRite
Gallons:
Up to 25,000 gal.
Top

?     Asked on 4/6/2009by Guest

I have an AquaRite which is 5 Years old and think my software is different then the new cell requires. Which cell do I need?
 Reply

A  Answered on 4/6/2009 by InyoPools Product Specialist Patrick P.

If you have an older unit (older than 2009) than you would require the GLXCELL15W which you may view or purchase here http://www.inyopools.com/Products/02100002048034.htm 
 Reply


?     Asked on 3/3/2016by steven

i need to purchase 25 K replacement cell, how do I know if I have the correct revison
 Reply

A  Answered on 3/3/2016 by InyoPools Product Specialist Lennox H.

Hi Steven, If your system originally came with a T9 cell, then you don't have to worry about the software revision. The system will tell you the software revision by scrolling through the menu or pressing the diagnostic button until you get to the software option.
 Reply


?     Asked on 6/6/2016by david lott

I have a 15 cell but i think they over killed it so how do i figure out what size pool i have?
 Reply

A  Answered on 6/7/2016 by InyoPools Product Specialist Patrick P.

Hi David, You can use this Pool Volume Calculator to figure out what size pool you have, however we do suggest oversizing the salt cell as you will get much longer life out of the cell.
 Reply


?     Asked on 7/8/2016by Maria Hoyne

I just ordered the aqua rite replacement main PCB. Will your turbo cellT-cell- 9 be compatible with it
 Reply

A  Answered on 7/8/2016 by InyoPools Product Specialist Alan M.

Yes the T-Cell 9 is compatible with the GLX-PCB-RITE main circuit board.
 Reply


?     Asked on 8/16/2016by Inyo Visitor

Is there a repair kit for this cell? The outside plastic is leaking at the place where pieces fit together just below the top where the water comes into the cell.
 Reply

A  Answered on 8/19/2016 by InyoPools Product Specialist Stacey M.

Hello, Unfortunately this just comes as one complete cell no repair kits for TCELL9.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Adjustable Wrench

3     1

Cell needed replacement.

Written on 8/28/2021 by Guest

I unscrewed both ends after unplugging the old cell and I put in the new cell. I pushed a couple of buttons on the control panel and....I was finished I have had clear water all summer - thanks INYO!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Pliers, skillfull hands

1     0

Salt Cell stopped working

Written on 8/26/2020 by Guest

Determined that the salt cell on my pool (just moved into the home) was not functioning properly. I diagnosed as per an INYO video. Simple to follow. After contacting INYO it was determined the Cell installed for my pool was undersized, I ordered a new one and it was a breeze to install and set up. INYO videos make it easy to follow
Replaced the O rings as a matter of doing a quality repair.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers, Socket Set, Adjustable Wrench

1     0

Low salt - no chlorine

Written on 6/15/2020 by Guest

I purchased a salt level testing kit that read 1900 ppm and added 4 bags of salt to raise it to 3700 ppm. Aqua Rite was still giving a reading of now 1400 ppm. Cleaned the salt cell with muriatic acid bath and reinstalled.

Salt reading went to 2700 but still no chlorine being produced. Did a manual recalibration (thanks to your instructional video) and would not see the correct ppm of salt.

Rinsed the salt cell again by removing and using cold water, visibly inspected the cell and looked fine. Decided to get the new cell from your site and everything was working fine again until 2 weeks later when my AR motherboard died.

Got the replacement from you and again thanks to your video on how to replace (with the details on jumpers on external power!!) Got that replaced and finally in a good state. Salt is a little high at 3700, but the pool looks great (again) and your videos really saved the day.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Adjustable Wrench

1     0

Needed to replace salt cell

Written on 5/20/2020 by Guest

Replaced old salt cell with a new one

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.78  out of 5 stars)
9 Rating
5 star:
 
(8)
4 star:
 
(0)
3 star:
 
(1)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews