PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE
Model # AQLCOLORMODHV
Alternate Part #'s GLD-301-1001, GOLAQL-COLOR-MODHV, HPPAQLCOLORMODHV
The ColorLogic Network Module is used with the Pro Logic to fully control the color, speed, motion and brightness of pre-set light shows in a compatible Hayward ColorLogic pool/spa light(s). After installing the ColorLogic Network Module and enabling the function in the Pro Logic, the user can program various parameters to fully customize their pool/spa light(s) operation. The ColorLogic Network Module can be used to control up to 32 pool or spa lights simultaneously. This method of control features 2 user defined programs; five fixed colors and eleven color-changing shows. All fixed colors and shows can be modified or changed. The factory set colors and shows are listed in the Program Table below and can also be found on the color laminated card included with the Network Module. A color chart can be found on the same card and will help when programming colors for the ColorLogic lights.
**For PS Series Only**
What is the ColorLogic Network Module designed for?
Reply
The ColorLogic network module is designed to be used with the new ColorLogic 4.0 lights and the ProLogic System. When used together the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement. The 4.0 ColorLogic Lights can be seen here http://www.inyopools.com/lights_colorlogic.aspx. The ProLogic Systems & ColorLogic Modules can be seen here http://www.inyopools.com/sanitizers_pro_logic.aspx.
Reply
Do i just need the light and my current prologic controller which runs my pool filter and spa etc.. or do i have to have a separate controller for the colorlogic led pool light?
Reply
You can use just the ProLogic to control the ColorLogic light but you will only be using a fraction of the overall control capabilities. To get the complete control capabilities you would need to order the ColorLogic Gen. 4.0 light here http://www.inyopools.com/lights_colorlogic.aspx along with the ColorLogic Communication Module here http://www.inyopools.com/Products/02200000040136.htmWhen using the ColorLogic Communication Module with the ProLogic the ColorLogic lights will display 101 color tones, 16 themed shows, while controlling light brightness, speed and movement.
Reply
I have a PL-P-4 system with color logic LED generation 4.20 lights is there any way to dim them? They are way way too bright.
Thanks
Reply
The ColorLogic Network Module is used with the Pro Logic to fully control the color, speed, motion and brightness of pre-set light shows in a compatible Hayward ColorLogic pool/spa light(s). After installing the ColorLogic Network Module and enabling the function in the Pro Logic, the user can program various parameters to fully customize their pool/spa light(s) operation.
Reply
Do I have to purchase the color logic control module for the light to work or will it work without it ?
Reply
Vinnie,The light will work without purchasing the Color Logic LED Communication module. The module is used to fully control the speed, motion, and brightness of the light. The light will still turn on and off and cycle through shows without the communication module.
Reply
