Part # CC10092S
Power-Flo Matrix Above-Ground Pump With XStream Cartridge Filter
XStream size for an XStream Clean. Once you see the new XStream fltration from Hayward, you`ll be hooked. Its massive size and incredible performance mean years of trouble-free filtration. It has an extra large capacity for dirt and debris and a quick-release, high-capacity air relief valve. But size isn`t the only thing this filter`s big on.
The Big news in above-ground pumps is the PowerFlo Matrix by Hayward. It features an industrial-size strainer basket to collect a lot of debris without a lot of maintenance. The Power-Flo Matrix has been engineered as a uniquely superior above-ground pool pump. With a single push of a button, this truly versatile pump changes from a veritical to a horizontal discharge and back again. Its large profile and integrated styling makes the Power-Flo Matrix a swimming pool pump like no other.
Applications & Features:
Click here for more Hayward Pump and Filter
I have a 15X30 above ground pool. I live in the country and am having a hard time keeping debris under control. When my original filter system died, I bought a smaller (50 pounds of sand) filter with 1/2 horse motor on advice of pool store I use. My old system was a 1 horse with 200 lbs.of sand. The new filter has never kept the pool clean--constant dirt and debris no matter how much I work at cleaning it. Got any suggestions for a new and better system?
Hi. This system is sufficient for a pool your size. If you would like a unit with a larger filter I would recommend the CC15093S model unit.
I have a 1hp pump. When plug the pump it makes a noice but it does not go on. Can you help?
Luis, It sounds like the motor shaft is seized. You will need to either replace the motor or the entire pump.
I need an adapter/connector for use with 1.5" flexible hose. Could you direct me where to find one?
Hi, Dave. The Hose Adapter - 417-6060 is the part you'll need.
I have an 18' x 33' rectangular pool with 4.5 inches of water all around. I'm stuck between the Hayward Xstream 100 or 150. Which do you recommend? Thanks for your help.
Hi Joe, I would suggest the larger 150 as it can filter more debris meaning more time between cartridge cleanings and it will also put less stress on your pump resulting in longer pump life.
Can I get this filter with a 1hp 2 speed pump
Hi. Bryan. The model number for the 2-Speed pump option is CC100922S.
I have the hayward cc1000 system with a 1.5hp pump. I have the cartridge cracks constantly. It calls for a 1hp pump. The 1.5 came with the pool when I purchased it . The store has since closed. Do you think this half horsepower would cause this?
Joe, It is possible that the extra HP can damage the cartridge. It sounds like you are getting too much pressure.
What are the dimension of this pump?
Hi Ray, The dimensions for this pump can be found on page 5 of the Power-Flo Matrix™ Owner's Manual.
is it possible to purchase just the top and lock ring for this filter
Yes the top lid and lock ring is part number 4663-36.
Is the 100 sq' xstream big enough for my 24 round with 52" walls?
Hi Ron, Yes this 100 Sq. Ft. Xstream would be the correct size for a 24' round pool. This is a great filter.
Do you sell a replacement hose that goes from the outlet port of the filter to the pool? I cannot find it under "replacement parts" or anywhere else in the world! The original is a blue, flexible hose but made of a stronger plastic than the beige house that goes into the pump from the pool. 2 of these blue hoses came with the original pump & filter. Thank you!
Hi Nadja, We do carry Universal Above Ground Pool Replacement Hoses most likely your hose is 1-1/2" in diameter but you would want to double check. This would be the hose that goes from the pool to the pump as well as the hose that goes from the filter back to the pool.
The manual says that a diverter valve can be installed for vacuuming to waste during heavy spring clean up or pulling rain water out of the pool. Where would it be installed? Do you sell this valve?
Yes we do carry this diverter valve which you may view or purchase through this link http://www.inyopools.com/Products/07501352023400.htm This valve has 3 ports on it, the valve would screw into the disharge side of your pump and you can have the handle turned so the return water goes through your filter or you can turn the valve in the opposite direction so the dirty water goes to waste and bypasses your filter, this is very helpful when vacuuming or for heavy spring clean up.