Part # CX200XRE
By Hayward Pool Products
Part # CX200XRE
Dimensions 28-1/8" x 10"
Alternate Part #'s HAYCX200XRE
Hayward SwimClear C200S OEM Cartridge
I need a pool filter Hayward C-200 O-E 200 SQ Ft size 9 inch Diameter 291/2 long 4 inch hole can't seem to find one in that dimension?
I Order a Hayward SwimClear C200S Single Element Filter a few years back and I'm Looking to replace the filter. The Harward Filter is Marked CS200E. Is this the correct filter to reorder?
Hi Gregg, Yes this is the correct replacement cartridge for your Hayward C200S Cartridge filter, this is what you need.
Can you tell me the dimension and length of this filter? It is not stated.
Hi Tina, The Hayward SwimClear C200S OEM Cartridge dimensions are: Outside Diameter: 10.39", Inside Diameter: 3.98", Height: 28.29"
2 to 4 hrs
1) Called warranty tech for system
2) Tech checked entire heating system. Checked jets found out the pressure was not right.
3) Initial system check said there were not enough jets in the total system so the pressure would shut off the heater.
4) After lowering the filter speed the heater began working.
5) The heater worked for an hour or so then cut off again.
6) I called the tech and he said the only thing he hadn't done was try to run the system without the filter in.
7) I removed the filter and ran the system for a day and the heater began to work without shutting down.
8) I ordered a replacement filter from Inyo Pools and the system is now working fine. The original filter that came with the NEW pool I bought was faulty.