By Hayward Pool Products


Details

Top

Part # 8-SP0715X62

Manufacturer Code SP0715X62

Product Description

This clearance valve was briefly used but is in new condition. The customer installed the valve and used it briefly before discovering they needed a complete filter. The valve was returned, inspected and tested. The valve is missing the pressure gauge. Hurry up and take advantage of this great deal!

USED ON PRO SERIES WITH 2" PLUMBING, AND ON THE HAYWARD SIDE MOUNT VALVE (2") SUPER PRO SERIES VALVE COLOR IS BLACK ROUND COVER, ATTACHED WITH 10 BOLTS & NUTS "SP715 X62" ON VALVE COVER "SP-715-A 8" ON VALVE BODY (THE 8 MAY LOOK LIKE A 3 ON SOME VALVES)

********

DIMENSIONS FRONT TO BACK WITH PLUMBING IS 11-1/8" PLUMBING FOR FILTER CONNECTIONS ATTACHED SIGHT GLASS With GASKET (SCREW IN TYPE) (2) O-RINGS FOR FILTER ATTACHEMENT (1) BOTTOM MOUNT PRESSURE GAUGE HEIGHT WITH PLUMBING IS 13-1/4" CENTERLINE SPACING OF PIPES IS 6" (AT THE ENDS THE . INSIDE DIMENSION BETWEEN PIPES IS 3-1/2") PORTS ARE 2" MPT (ABOUT 2-3/8" INSIDE DIAMETER)

********

VALVE POSITIONS

********

PORT ARRANGEMENT

********

INCLUDES

Top

?     Asked on 8/1/2015by Frank parks

I have a pac fab valve sp715 on my triton pac fab filter that was installed in 1987. I need the top part of the valve, handle assembly, and diverter. The outside dimension of the top part is 8 1/2 inches and has 10 screws. one of the screw holes has a square so the top part of the valve matches the bottom. Can I get the handle assembly without replacing the entire valve which requires re plumbing the valve
 Reply

A  Answered on 8/4/2015 by InyoPools Product Specialist Lennox H.

Hi Frank, You can replace the Key,Cover & Handle Assembly 2"- White (SPX0715BA), the Cover O-ring (260) and Spider Gasket (O-322). That will be everything you will need  to complete the installation with changing the body.
 Reply


?     Asked on 7/18/2018by JERRY

Need to replace a pac-fab SP-715-DE what would be a good replacement valve with minimal piping change.
 Reply

A  Answered on 7/18/2018 by InyoPools Product Specialist Lennox H.

Hi, Jerry. The SP0715ALL will be the correct replacement. This valve since it has the pre-plumbed port will not mount to a PacFab filter, only a Hayward filter. 
 Reply


?     Asked on 5/20/2019by Karl N

Need to replace a pac-fab SP0715G11. What would be a good replacement valve?

 Reply

A  Answered on 5/20/2019 by InyoPools Product Specialist Lennox H.

Hi, Karl N. In order to assist you, we will need the Pac-Fab tank model and or the valve model which is located on the waste port.
 Reply