PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE
By Hayward Pool Products
Model # SP2610X15DE4820
Warranty 1 Year
This Equipment Package includes the Hayward Super Pump, DE Filter and 2" Multiport Valve
Hayward Super Pump Specs.
Specs:
Hayward Super Pump Application:
Hayward Super Pump Features:
Dual Speed Benefits:
Performance Data
Hayward Super Pump Overall Dimensions
Hayward Pro-Grid DE Filter & Valve Specs:
Hayward Pro-Grid vertical grid D.E. filters provide superior water clarity, efficient flow and large cleaning capacity for pools and spas of all types and sizes. Constructed with high-strength reinforced thermoplastic, Pro-Grid combines high-technology features and "service-ease" design for an unparalleled filtration value for both new pool and aftermarket installations.
In addition, the Hayward Pro-Grid filter delivers low maintenance and dependable operation.
Features
Multiport Valve Data- The valve included with this package is the SP0715XR50
Does everything needed to install the filter and pump come with this? For example, pipe fittins, pump-to-filter fittings & plumbing, etc.
Reply
None of the plumbing comes with this system. The system would include the pump, filter and multiport valve on Sand and DE filters (cartridge filters do not require a multiport valve). Any additional plumbing or fittings would be purchased locally at a hardware store.
Reply
How many hours per day should I run my pump?
Reply
There are many factors to consider; bather load, gallons of water, pump horsepower, type and size of filter just to name a few. A good guideline is 8-10 hours a day. On the cooler days and early and late season, you can cut the run time down to 4-6 hours because there is usually less swimmers and cooler water requires less chemicals. In peak season, when it is the hottest, raising the run time to 10-12 hours per day will help to keep the pool clean and circulating during it’s time of heaviest use.
Reply
Hi, can this pump be used with a salt water chlorinator [generator] made in South Africa by Justchlor which requires a salt level of 6000ppm by weight, yes I know most USA systems call for 3500ppm. After 27 months my pump motor bearing is whining badly and I presume the shaft seal has gone, I see Hayward has a kit with a salt shaft seal, do you stock this pump "salt ready" if this is what I need?
Reply
The SP2610X15 is a 1.5HP 230/115v single speed pump that can be used with salt water pools. The main issue with a higher salt ppm level is that the salt will corrode the rubber seals and any metals that it comes in contact with at a quicker rate. Unfortunately the pump does not come "salt ready". You would have to purchase a salt water tune up kit separately. I recommend changing the shaft seal every season with a salt water pool to prevent shaft seal failure.
Reply
Is this pump and filter capacity adequate in capacity for 19000 gallon in ground pool ? Thank you. Will Deits
Reply
Hi Will, This package will be suitable for a 19,000 gallon in-ground pool. I would still recommend making sure that this pump will be able to provide the adequate water flow based on you pool feet of head. You can review our How To: Size a Pool Pump guide for more info.
Reply