PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE
By Hayward Pool Products
Model # SP2610X152SDE4820
Warranty 1 Year
This Equipment Package includes the Hayward Super Pump, DE Filter and 2" Multiport Valve
Hayward Super Pump Specs.
Specs:
Hayward Super Pump Application:
Hayward Super Pump Features:
Dual Speed Benefits:
Performance Data
Hayward Super Pump Overall Dimensions
Hayward Pro-Grid DE Filter & Valve Specs:
Hayward Pro-Grid vertical grid D.E. filters provide superior water clarity, efficient flow and large cleaning capacity for pools and spas of all types and sizes. Constructed with high-strength reinforced thermoplastic, Pro-Grid combines high-technology features and "service-ease" design for an unparalleled filtration value for both new pool and aftermarket installations.
In addition, the Hayward Pro-Grid filter delivers low maintenance and dependable operation.
Features
Multiport Valve Data- The valve included with this package is the SP0715XR50
Does everything needed to install the filter and pump come with this? For example, pipe fittins, pump-to-filter fittings & plumbing, etc.
Reply
None of the plumbing comes with this system. The system would include the pump, filter and multiport valve on Sand and DE filters (cartridge filters do not require a multiport valve). Any additional plumbing or fittings would be purchased locally at a hardware store.
Reply
How many hours per day should I run my pump?
Reply
There are many factors to consider; bather load, gallons of water, pump horsepower, type and size of filter just to name a few. A good guideline is 8-10 hours a day. On the cooler days and early and late season, you can cut the run time down to 4-6 hours because there is usually less swimmers and cooler water requires less chemicals. In peak season, when it is the hottest, raising the run time to 10-12 hours per day will help to keep the pool clean and circulating during it’s time of heaviest use.
Reply
Hi, can this pump be used with a salt water chlorinator [generator] made in South Africa by Justchlor which requires a salt level of 6000ppm by weight, yes I know most USA systems call for 3500ppm. After 27 months my pump motor bearing is whining badly and I presume the shaft seal has gone, I see Hayward has a kit with a salt shaft seal, do you stock this pump "salt ready" if this is what I need?
Reply
The SP2610X15 is a 1.5HP 230/115v single speed pump that can be used with salt water pools. The main issue with a higher salt ppm level is that the salt will corrode the rubber seals and any metals that it comes in contact with at a quicker rate. Unfortunately the pump does not come "salt ready". You would have to purchase a salt water tune up kit separately. I recommend changing the shaft seal every season with a salt water pool to prevent shaft seal failure.
Reply
is this kind of pump and filter can recirculate the water of 24x36 ft swimming pool? How many hours can completely recirculate?
Reply
Hi, This pump and filter can recirculate the water in a 24' x 36' pool. The runtime is determined by the actual gpm the pump generates based on the feet of head.
Reply