$646.99
By Interfab Inc.
Model # WOKSPILLM32
Alternate Part #'s HRL-27-0006, WOKSPILLM30
Click here for more Rock Waterfalls
Is this for both pieces as shown in picture and will this install on an existing in ground pool?
Reply
The picture provided shows both the small and medium patina waterfalls. They are sold separately. The WOK falls can be installed on existing pool however they require plumbing to be stubbed up underneath them. How involved this installation will be depends upon your particular pool.
Reply
We already have a 2 inch in diamter PVC pipe already plumbed for a fountain to spill into our pool. Will this fountain fit that?
Reply
The piping inside the interfab wok waterfall is 1/2" The Wok is hollowed out on the bottom and will be plumbed in there. You will require some type of piping adapter to go from 2" to 1/2" This can be purchased at a local hardware store.
Reply
How many inches from edge of pool do you recommend plumbing? What size pipe do you recommend?
Reply
According to the manufacturer, the recommended distance from the pool edge is 23 inches and the pipe size would be 1/2 inch. See the Interfab diagram above that shows the recommended distances for the pedestal base and the pipe from the edge of the pool.
Reply
Is the Wok designed to be glued or mounted to the deck, or does it sit upon the deck without any anchor?
Reply
The Wok Waterfalls are designed to be free-standing; that is they are not glued or anchored to the deck. The only attachment is to the water supply.
Reply
