PE Series Control Center 60 Amp PE25300RC With Wireless Remote Control System

For pool, spa or water feature applications, the I-Wave PE Series Wireless Control System includes one P1353ME mechanism that controls a total of three timed circuits, including single speed or two-speed filter pumps, cleaner/booster pumps, pool lights, spa lights and landscape lights. Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system.

The PE25300RC includes the PE950 wireless remote control along with the PE650 receiver this combination allows the system to display the status of each of the three circuits as well as pool or spa water temperature, pool or spa thermostat set point, heating status and overall communication status.

The NEW “PE SERIES” control centers couple the standard features of our current control centers with the convenience of digital automation. The all-weather enclosure features the P1353ME digital time clock plus provisions to install a switching device or GFCI receptacle on the side and additional switching devices inside. In addition the PE25300 has a 60 Amp Breaker Base in order to provide service at the equipment pad.

Click Here for PE25300 Brochure
Click Here for PE25300 Owner's Manual

Applications:

• Single Speed Pump/Booster Pump Combos
• Two-Speed Pump/Booster Pump Combos
• Pool & Spa Lighting
• Water Feature Applications
• Garden & Fountain Applications
• Landscape Lighting

Product Specs:

• 120 or 240 Volt
• 3 - SPST Switch
• Case - 16-1/2" (41.9 cm) high x 10-7/8" (27.2 cm) wide x 4-1/4" (10.6 cm) deep
• Digital Clock Rating - 20 Amp resistive each circuit
• Memory Back-Up
• Heater Protection (Fireman Switch)
• LCD Readout
• Three ON/OFF events per circuit per day
• Optional Freeze Protection Probe - 178PA28A
• Optional Wired Remote - 133PE1484A
• Agency Approval - CSA/C-US