PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE

By Jandy


Details

Top

Model # JXI260N

Alternate Part #'s JDYJXI260N

Product Description

The JXi 260,000 BTU Natural Gas Heater

The JXi heater sets a new standard in pool and spa heating technology with its ultra-compact size, lightweight design, and installation flexibility, making it a top choice for pool professionals and pool owners everywhere. The high-efficiency, low-NOx JXi is available in two BTU sizes, 260K, 400K, and offered in both natural and propane gas models.

Pro-driven features for the fastest, most customer-friendly installation include:

  • Ultra-Compact - 2' x 2' footprint for small space requirements and maximum installation flexibility.**
  • Lightweight Design - Weighs less than 126 pounds unpackaged for easy maneuverability and transport.
  • Best Retrofit Option - Plumbing flexibility for quick Mastertemp® and 
    Max-E-Therm® replacement that requires no plumbing adjustments.***
  • Easy to Control - RS485 digital interface is Aqualink®/iAqualink™-compatible for pool and spa automation.

**Refer to JXi manual for proper heater clearances that may apply.

Features

  • Energy-efficient - 83% thermal efficiency rating and low-NOx design surpasses strict DOE energy efficiency requirements.
  • Ultra-Compact Lightweight Design - Easy to store, transport, and install, the JXi is 38% lighter with a 28% smaller footprint.
    *Smaller footprint compared to major competitor models
  • Flexible Installation - 180° rotatable top so you never need to rotate headers.
  • Versa Plumb®-Ready - Installation in the Versa Plumb system reduces plumbing costs and increases energy efficiency, all using the smallest footprint available. Sweep elbow included in all JXi models
  • Easy Access - Electrical panel flips up for ease of service.
  • Easy Replacement - 3-port header for easy plumbing and drop-in replacement of MasterTemp, Max-E-Therm, and Jandy Pro Series heaters.
  • Sidewall Ventilation - Provides versatility and ease of installation.
  • High-Efficiency Gas Train and Heat Exchanger Design
    • Copper fin heat exchanger tubes for efficient heat transfer
    • Single stainless steel burner with robust design
    • Blower-driven gas and air mix for reliable performance
    • Hot surface ignitor for consistent start-ups
  • User-Friendly Control - Digital interface for effortless temperature control and diagnostics with run-time and cycle meter.

Technical Details

  • Corrosion-resistant stainless steel header bar for extreme heat exchanger durability.
  • Venturi-driven air and gas mix for enhanced performance.
  • Reliable, balanced flow and temperature control with thermal regulator valve.
  • Differentiated limit switches meet applicable product safety standards.
  • Corrosion-resistant temperature sensors for reliable operation.

Product Specifications

Gas:
Natural Gas
Ignition:
Electronic
BTU:
260,000 BTU
Top

?     Asked on 9/29/2015by raymond kusto

will this be compatible with the Jandy Filter CV460
 Reply

A  Answered on 10/5/2015 by InyoPools Product Specialist Lennox H.

Hi Raymond, The Jandy Pro Series JXi Heater 260,000 BTU NG - Elec Ign can be used with the Jandy CV460 Filter.
 Reply


?     Asked on 5/31/2016by TW

Is this an easy swap for a Laars 250,000 BTU LT250-L? I do not want to have to make major changes to plumbing.
 Reply

A  Answered on 6/5/2016 by InyoPools Product Specialist Lennox H.

Hi TW, This heater will not match up exactly to the unit you have. The dimensions can be found on page 7 of the Jandy JXi Owner's Manual.
 Reply


?     Asked on 7/23/2016by Jim K

We have a Jandy Pro Series sand filter JS60-Sm will this heater be compatible? Thanks Jim
 Reply

A  Answered on 7/24/2016 by InyoPools Product Specialist Lennox H.

Hi Jim, Heaters are sized based on the surface area of the pool or spa and the desired temperature increase. You can use this heater with a Jandy JS60-SM filter if it's sufficient for your application.
 Reply


?     Asked on 6/29/2017by Lou

I have a Jandy 250,000 BTU - Model #LLD250. The pool surface is 16' x 38'. about 27,000 gallons. I know the new models are move efficient. Is this model too large? or OK
 Reply

A  Answered on 7/2/2017 by InyoPools Product Specialist Lennox H.

Hi, Lou. This JXi Heater - JXI260N is ok for your size pool. 
 Reply


?     Asked on 7/1/2017by lou

is the Jandy Pro Series JXi Heater 260,000 BTU NG - Elec Ign - JXI260N good replacement for my old heater, a Jandy 250000 BTU Model #LD 250. Pool is 16x40, 27000 gallon. How much assembly do I need to do before installing
 Reply

A  Answered on 7/2/2017 by InyoPools Product Specialist Lennox H.

Hi, Lou. This unit can be used to replace the Laar LD250 unit. The only major installation aspect will be the plumbing. 
 Reply