Model # CPHVLEDS50
Alternate Part #'s CPHVRGBWS50
Jandy WaterColors LED Light
WaterColors LED energy-efficient pool and spa lights provide the finest, brightest colors for your pool and spa with less than 50 watts of power. Utilizing Color Kenetics® technology, our LED lights saturate your pool and spa with three vibrant, primary colors; Cobalt Blue, Magenta, and Emerald Green, as well as six blended watercolors like Caribbean Blue and Violet. For a change of pace, choose from five color shows such as festive "Fat Tuesday" or "America the Beautiful". Whether swimming or just lighting up the night, you'll enjoy an endless display of brilliant, beautiful color.
WaterColors Features:
For a color-changing LED light, how do I switch between the different settings with just a standard light switch?
Reply
The LED lights are designed to move to the next programmed setting each time you turn the switch on and off. This will toggle through the different color settings and shows.
Reply
Hi,
I turned on my light after opening the pool and the light does not work. The only thing that is working are the small LED lights. At night it is hard to see the lights, however, the main white light is not working. Do I need to replace the entire light or do you think its a electrical issue where not enough electricity is getting to the light?
Thanks,
Dario
Reply
Hi Dario, First check to see if you are getting power to the light. Using a multimeter or voltmeter, check the power connection coming out of the breaker box to the light cable. You should have a junction box somewhere near the house. Be careful since the power will have to be on to test it. Next, if you have a transformer to convert the 120V to 12V, check the output of the transformer to make sure you are getting 12V. If you have a switch to turn the light on, check the output of that switch to make sure the switch is good. If that all works, you will have to pull the light at the pool and take it apart to get at the light power connection. Measure the voltage at the back of the light (with the power on) to see if you have power there. If you do have power, then the bulb is bad and has to replaced.
Reply
I have a Jandy RS system. Last night when I turned the pool light on, it cycled through a few colors and went dark. I checked the GFCI and it is good.
Do you recommend I replace the whole light fixture or the Light Engine PCB?
Reply
Hi Sep, You can replace just the Light Engine (R0474100) or the complete light fixture.
Reply
I have an old Pentair 600015/16/17/18 light that has run its course and I need to replace. Will the Jandy Watercolors LED 120V 50ft cord fit this niche. Depth should be fine I am more worried about the width/height. Also, I assume it is compatible with the Jandy iAquaLink 2.0 system? Thanks.
Reply
Hi Chris, Yes this Jandy WaterColors will fit into the niche that your Pentair light was using. The Watercolors is the best option for the iAqualink as the color shows of the light will readout onto your iAqualink.
Reply
