Model # 520592
By Pentair Pool Products
Model # 520592
Click Here to view the entire line of Pentair EasyToch Controls
EasyTouch Control Systems eliminate the inconvenience of repeated trips to the equipment pad, memorizing operating sequences, opening and closing valves and resetting time clocks and thermostats. What’s more, EasyTouch systems set the standard for operating simplicity with push-button operation and clear, intuitive instructions and displays.
Today, you also choose from systems that incorporate the revolutionary IntelliChlor™ automatic salt chlorine generator. IntelliChlor uses plain salt to create pure chlorine for pool sanitization the convenient and automatic way. Electrolytic chlorine generation is the easiest, most effective and convenient way to keep pool water sparkling clean.Your EasyTouch system includes all circuitry and fully programmable controls in a single Load Center unit installed near your pool or spa equipment. For pool/spa combinations with a shared body of water, you also receive two valve actuators for automatic switching between pool and spa operating modes.
EasyTouch systems are available for separate pools and spas, as well as pool/spa combinations with shared equipment or separate circulation systems. You select from systems that control 4 or 8 accessory functions. Four-function systems are typically used to control pool and/or spa operation plus pool or spa lights and heaters. Eight-function systems allow separate scheduling for additional features, such as landscape lighting, waterfalls, fountains, additional heaters, and more.
For added flexibility and convenience, indoor, spa-side and wireless remote control devices can be added to any EasyTouch system. As you can see, with EasyTouch systems, pool, spa and poolscape accessory operation—including sanitization— becomes as simple as operating your automatic lawn sprinkling system.
4PSC Single Body of Water System Includes - 4 relays, 3 valve outputs, no actuators, 8 position breaker panel, local remote from power supply, chlorine generator, no indoor control (indoor control must be purchased separately) and 2 temp sensors.
8PSC Single Body of Water System Includes - 8 relays, 3 valve outputs, no actuators, 8 position breaker panel, local remote from power supply, chlorine generator, no indoor control (indoor control must be purchased separately) and 2 temp sensors.
4SC Pool & Spa System Includes - 4 relays, 4 valve outputs, 2 valve actuators, 8 position breaker panel, local remote from power supply, chlorine generator, no indoor control (indoor control must be purchased separately) 2 temp sensors, 2 heater controls.
8SC Pool & Spa System Includes - 8 relays, 4 valve outputs, 2 valve actuators, 8 position breaker panel, local remote from power supply, chlorine generator, no indoor control (indoor control must be purchased separately) 2 temp sensors, 2 heater controls.
Click here for EasyTouch Brouchure
Optional controllers can be added to your EasyTouch for added convenience and are PURCHASED SEPARATELY:
Is the salt included with the salt chlorine generator?
No, salt is not included. You would purchase the salt locally and the quantity will depend upon the number of gallons of water in your pool. Use a salt that is at least 99.8% pure NaCl. The preferred salt is evaporated, granulated, food quality, and NON-iodized. Avoid using salt with anti-caking agents like sodium ferrocyanide, also known as yellow YPS (prussiate of soda). These cause some discoloration of fittings and pool surface finishes. DO NOT use calcium chloride.
What is the Pentair Intellichlor Dummy Cell used for?
The Dummy cell is basically a cell with no internal parts, this cell is used during cleaning of the real cell. So when you remove the real cell for cleaning you would put the dummy cell in place of the real cell. After you have finished cleaning the real cell you would remove the dummy cell from the plumbing and place the real cell back in place. You may view or purchase the Dummy Cell here >http://www.inyopools.com/Products/03500001032551.htm