UltraTemp 120 H/C Heat Pump 127,000 BTU - Almond (Heat/Cool) - 460935

$4,369.99

IN STOCK
FREE SHIPPING

Part # 460935

By Pentair Pool Products

  5 Average  

Details

Top

Part # 460935

Product Description

UltraTemp ® High Performance Heat Pump 



Simply the most economical way to heat your pool and spa. With today's record energy costs, there's never been a better time to invest in a heat pump. Compared to gas, oil or electric heaters, UltraTemp uses just a fraction of the energy to generate the same amount of heat.

An Eco Select ™ Brand: UltraTemp ® High Performance Heat Pumps transfer heat from the atmosphere to the pool or spa, saving up to 80% in energy costs compared to gas-fired heaters. Plus, they are the only heat pumps available that use R-410A refrigerant, EPA-recognized as environmentally safe and clean.

 

  • 100% titanium heat exchanger assures corrosion-free performance for extra long life and value.
  • LCD control board displays an intuitive, menu-driven readout with easy to follow, full word messages - no more codes.
  • AutoSet (time clock over-ride) feature monitors water temperature and turns the water circulation pump on and off as needed to maintain desired pool termperatures
  • Automatic defrost feature senses refrigerant temperature and prevents UltraTemp from freezing, allowing the heat pump to operate at even lower temperatures
  • Compatible with All automated control packages
  • Long-life corrosion resistant plastic composite cabinet stands up to severe climates and pool chemicals
  • Emerson Copeland Scroll Compressor
  • ETL listed for safe operation
  • Thermostatic Expansion Valve (TXV) controls refrigerant flow for optimum effciency and BTU output over a wider operating range
  • Highest effciency available, meets or exceeds existing codes and standards
  • BTU and effciency performance independently certified by the Air-Conditioning, Heating and Refrigeration Institute, AHRI







For More Swimming Pool Heat Pumps

Product Specifications

BTU:
127,000 H/71,000 C BTU
Heat Exchanger:
Titanium
Compressor:
Scroll
Phase:
Single
Volts:
230
Hz:
60 Hz
Recommended Breaker Size:
50
Wire Size:
8
Special Feature:
Heat/Cool
Top

?     Asked on 1/9/2021 by Randall Starberg

i am interested in cooling my pool in the summer, my pool is 58000 gallons and i live in south carolina where summer temps can make my pool uncomfortably warm. what model would i need to cool my pool.
 Reply

A  Answered on 1/11/2021 by InyoPools Product Specialist Joe S.

Hello Randall, based on the information proved we would recommend the Pentair Pool Products UltraTemp 120 H/C Heat Pump 127,000 BTU - Almond (Heat/Cool) or the Classic Series Heat Pump 137,000 BTU (Heat/Cool) - 016037.
 Reply


?     Asked on 1/4/2021 by Ryan S Trahan

What is the weight of this unit?
 Reply

A  Answered on 1/4/2021 by InyoPools Product Specialist Joe S.

Hello Ryan, this unit shows a shipping weight of 278 pounds when on the pallet.
 Reply


?     Asked on 12/21/2020 by

If you have a residential pool in the back yard 8 10 thousands gallons of water is this unit to big for that amount of water and do you cary smaller units
 Reply

A  Answered on 12/21/2020 by InyoPools Product Specialist Joe S.

Good afternoon, with Heat Pumps we always recommend oversizing. If you are looking for a Heat/Cool unit this would be your best option. If you are looking for just a heat unit we have other options. And would recommend you contact us via our chat support and we can help narrow your search. 
 Reply


?     Asked on 11/24/2020 by

Does this unit have to be fed from a GFCI circuit breaker?
 Reply

A  Answered on 11/25/2020 by InyoPools Product Specialist Joe S.

Main Power Electrical wiring to the heat pump must be in accordance with the latest edition of the National Electric Code (NEC), ANSI/National Fire Protection Association (NFPA) 70 in the United States, and in Canada, the Canadian Electrical Code (CEC) C22.1, unless local code requirements indicate otherwise. All wiring must be done by a certified or qualified electrician.
 Reply


?     Asked on 8/27/2020 by Tim

What are the dimensions on the Pentair UltraTemp120 Electric Heat Pump H-W-D, I do not see the A dimension on your website. Also we are considering a Pentair Master Temp 400K LP ASME Gas Heater in conjunction with the electric Heat Pump, please send dimensions on that unit also. Thanks
 Reply

A  Answered on 8/27/2020 by InyoPools Product Specialist Lennox H.

Hi, Tim. The dimensions for the UltraTemp 120 model are H 45.5” x W 30.7" x D 38.7 and the MasterTemp is H 28.15" x W 23.02" x D 32.61". 
 Reply


?     Asked on 4/23/2020 by Robert Iacono

I have a ULTRATEMP 120R H/C on a inground salt water pool with approximately 23,000 gallons, is will this heat pump heat my pool and on average how long should it take to raise the temperature of the water?
 Reply

A  Answered on 11/5/2020 by InyoPools Product Specialist Hector F.

Hi Robert, yes this Pentair Ultra Temp 127k BTU heat pump will be a good size unit to use on a 23k gallon swimming pool. There are a number of variables to consider when attempting to calculate the length of time needed to heat a swimming pool. Here is a guide that we put together called "How Long Does It Take to Heat a Pool?" that should help with that. 
 Reply


?     Asked on 4/14/2020 by evelyn N/A alvarenga

good morning i have a question I have UltraTemp 120 H/C Heat Pump 127,000 BTU pool hater and notice on the bottom there is an opening that looks like a drain plug, my question is there is nothing attached to it should there be one ? thank you
 Reply

A  Answered on 11/23/2020 by InyoPools Product Specialist Megan C.

The heat pump will produce condensation (water) while in operation. The heat pump base is designed to allow the condensation to exit through the bottom drain port when the unit is running. The condensation will increase as the outdoor air humidity level increases. See page 36 http://images.inyopools.com/cloud/documents/ultrafloom.pdf for more details of regular intervals to ensure proper condensate drainage:
 Reply


?     Asked on 8/9/2019 by Tim

Can this unit be hooked up to the IntelliConnect automation system? If so, will I be able to utilize the heating and cooling function?
 Reply

A  Answered on 8/12/2019 by Industry Professional

Yes, this unit can be connected to a IntelliConnect automation system.
 Reply


?     Asked on 7/31/2019 by Rick

We currently have a two year old 460933, in commercial use in an RV park 40,000 gal. pool. However we are in the desert and experience water temps in the mid 90's in the summer. I'm guessing their is no economical way to add cooling to the 933. If there is please recommend the proper add on equipment. If not would the 935 be the right upgrade to provide cooling capability down to 82 to 84 degrees?
 Reply

A  Answered on 8/1/2019 by Industry Professional

Hi Rick, There is no way to add on Heat Cool to your current unit. The best thing would be to purchase the 460935
 Reply


?     Asked on 7/22/2019 by

I have a 21K gallon inground pool on Maryland's eastern shore. How do I know if I need a model 120 or 140 or any other model?
 Reply

A  Answered on 7/23/2019 by InyoPools Product Specialist Hector F.

120k BTU's or 140 are suitable for your application, however, using a 140k BTU model will not work as hard and would heat the body of water quicker. 
 Reply


?     Asked on 9/8/2016 by erick

I have a commercial pool 65000 gallons I need 2 of these units how many GPM and also im in the desert 112 degres how much cooler will it drop if they run 24/7
 Reply

A  Answered on 9/9/2016 by InyoPools Product Specialist Scott W.

The minimum flow rate is 30 GPM, the maximum is 100 GPM. As far as cooling the water, it will do about 5-8 degrees in the hot climate that you live in. I use to live in Coachella Valley and that was about what my chiller would do.
 Reply


?     Asked on 7/12/2015 by

I haven't ordered this product yet. If I order from your company, will Pentair honor the warranty? Are you guys a Pentair distributor or do I have to purchase from Pentair directly to receive the warranty?
 Reply

A  Answered on 7/14/2015 by InyoPools Product Specialist Joe S.

Hello Yes we are a Pentair distributor for all Pentair Products. Having it installed by a certified installer will no void the product. So you will have full manufactures warranty
 Reply


?     Asked on 7/12/2015 by

The sales brochure states that there is a 10 year warranty on compressor parts and labor and a lifetime warranty on the titanium heat exchanger. Since you guys are using the sales brochure on your sight, I am assuming that you honor this warranty?
 Reply

A  Answered on 7/12/2015 by InyoPools Product Specialist Alex V.

Hello, The warranty is handled directly through the manufacturer. If you have a warranty issue, you will need to contact Pentair with the proof of purchase and proof of installation.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
2 Rating
5 star:
 
(2)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)