D Series Pump 5HP 3-Phase 230/460V High Head - DHJ3-170

$1,169.99

IN STOCK
FREE SHIPPING

Model # DHJ3-170

By Sta-Rite


Details

Top

Model # DHJ3-170

Availability Please allow 3 - 4 weeks for delivery - Special Order

Product Description

Cast Iron Self-Priming Centrifugal Commercial Pool Pump

Especially designed for commercial and public swimming pools and spas, aquatic facilities, water parks and fountain applications where high performance and self-priming characteristics are desired. These self-priming, high performance pumps are available in high head and medium head models, providing a complete range of performance characteristics. Motors are open drip-proof, continuous duty rated 3450 RPM.

A self-priming, high performance pump for semi-commercial and commercial swimming pools and spas. D Series pumps are especially designed for commercial and public swimming pools and spas, aquatic facilities, water parks and fountain applications where high performance and selfpriming characteristics are desired. These centrifugal pumps are available in high head and medium head models with motors from 3-5 HP
to provide a complete range of performance characteristics. Motors are open drip-proof, continuous duty rated at 3450 RPM.

Standard Features:

  • Back pull-out design allows entire motor to be
    removed for servicing impeller, seal or motor
    without disturbing plumbing.
  • Suitable for outdoor installation.
  • Precision cast and machined bronze impeller is
    dynamically balanced for long seal life and quiet
    operation. Non-overloading.
  • 200 Volt models available.
  • 2", 21⁄2" or 3" suction port and 11⁄2", 2" or 21⁄2"
    discharge port.

Materials and Design:

Pump Body = Volute type, back pull-out design.

  • Port Size:
    • Single suction port: 2", 2.5" or 3" NPT on centerline
    • Discharge port: 1.5", 2" or 2.5" NPT on centerline
    • Winterizing drain port: 1/4" NPT
  • Material
    • Close-grained grey iron
  • Impeller
    • Silicon brass material; closed, non-overloading desing
  • Shaft Seal
    • Self-flushing, mechanical John Crane Type 2. Ceramic and carbon seal faces. Stainless steel, brass and Buna N spring bellows.

Hair and Lint Strainer

  • Material
    • Separate bolt-on Noryl body with plastic basket, Lexan lid, and stainless steel bolts.
  • Size
    • 6" ANSI 150 bolted flange suction and discharge ports.

Pump Maximum Limits

Liquid Temperature: 104º F
Ambient Air Temperature: 104º F

Motor

  • Frame Size
    • NEMA Series, JM construction
  • Shaft
    • Carbon steel inside a 300 Series stainless steel sealed removable shaft sleeve
  • Design
    • 3 or 5 HP, 3450 RPM, open drip-proof(unless other-wise specified), continuous duty rated. 40°C ambient
      maximum
  • Bearings
    • Permanently sealed ball type, pre-lubricated
  • Thermal Overload Protection
    • Single-phase motors: Automatic reset Three-phase motors: External thermal protection required

Maximum Limits

  • Liquid temperature: 200°F
  • Ambient air temperature: 104°F
  • Pressure: 75 psi
  • pH Range: 4.0-9.0

Product Specifications

Model:
DHJ3-170
HP:
5 HP
Amps:
6.8 - 15.2/7.6 amp
Volts:
230/460 V
Phase:
Three
Head:
High Head
Port Size:
2 in.
Speed:
Single
Weight:
178 lbs.
Strainer:
Not Included
Top

?     Asked on 3/2/2017 by Jay

I am looking to pump in the range of 140 to 180 gpm. Will this pump handle that?

A     Answered on 3/2/2017 by InyoPools Product Specialist Lennox H.

Hi, Jay. If you can provide us with the feet of head we can confirm if this pump would provide the desired flow rate.

?     Asked on 10/17/2016 by Danny Benjamin

how many feet high can this pump to

A     Answered on 10/18/2016 by InyoPools Product Specialist Lennox H.

Hi, Danny. The Sta-Rite® D Series Spec Sheet will provide you with the answer to your question depending on the desired water flow.

Top

Review Summary

  (Average 0 out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)