Model # R5350TI-A
Manufacturer Code 013319
Who ever thought doing something good for the environment would also save you money? It's true! A Raypak heat pump is built with the latest eco-friendly R410A refrigerant that operates more efficiently than R-22. But the most amazing aspect of a heat pump pool heater is its operating efficiency compared to gas heaters. A heat pump operates at 5 to 6 times the efficiency of a standard gas, oil or electric pool heater. If you live in an area where your natural or propane gas costs have out-paced your electricity costs, the savings can be big. The chart illustrates just how much money can save using average energy cost data.
- Exclusive DuraSteel™ Powder-Coated Cabinet
Polyester powder-coated, non-corrosive cabinet is more durable than plastic heat pump cabinets. Same rugged steel construction used by all the major air conditioner manufacturers
- Large Air Coils
Raised lanced-fin design maximizes heating at lower temperatures. Raypak engineered coils are highly optimized to meet our specific design requirements. From the proper fins per inch to advanced distribution circuiting. We are the only heat pump pool heater company to actually manufacture our own coils.
- Venturi Fan Cowling
High-capacity 3000-cfm fan provides unrestricted air flow for better heating. Precision engineered and manufactured
cabinet design eliminates unwanted air gaps. This means more air over the coil which translates to greater efficiency
- Scroll Compressor
Scroll compressors are quiet and efficient compared to piston type compressors. They provide higher efficiency, lower sound levels, superior durability and unsurpassed reliability. The unique design of a scroll compressor actually wears in over time, not out!
- Sound Isolation Pads
Prevents sound transfer to equipment pad and elevates the base pan to improve water drainage. Its the little details like this that make Rheem products stand out from the
- Spiral Titanium Tube
Our spiral titanium tube heat exchanger provides a corrosion-free waterway that can withstand the abuses of harsh pool chemistry. The spiral tube helps reduce deposit build-up and increases efficiency by performing a “scoopand- lift" action.
- Internal Bypass Valving
Automatically compensates for normal day-to-day changes in your pool's hydraulics, maximizing heat transfer efficiency.
- Plumbing Connections
Off-set 2" PVC union connections are included for ease of installation
Controls - Analog
- Dual Thermostats
Allows separate pool and spa temperature settings.
- Exclusive Direct-Set Thermostat
Our direct-set thermostat is easy to use; the temperature settings are right on the dial. This eliminates the guess work involved compared with some dials that use a gradient or blue-to-red “swoosh".
- Remote/Local Switch
Compatible with the latest automated pool control systems. Exclusive remote/local switch ends the conflict between outside control systems and the heat pump control system. Great for troubleshooting.
- Diagnostic Lights
Six LED diagnostic lights keep you informed about the heat pump pool heater operation. Power on, water flow, heat demand, compressor delay, defrost active, low refrigerant pressure.
Controls - Digital
- Pool/Spa Control
Your digital heat pump pool heater can be set to have a different target temperature for your pool and spa. This allows you to dial in just the right spa temperature and never have to adjust it again. The pool can be set to a lower, more energy saving temperature.
- Remote Compatible
The digital heat pump pool heater can be easily controlled by most two-wire and three-wire remote systems.
- On Board Diagnostics
Tells the homeowner if there is a problem. Provides the service technician with detailed diagnostic information.
This Limited Warranty does NOT apply;
1. if the product has been moved from its original place of installation, or if the original
owner no longer owns the property where the original installation was made;
2. if the product is not properly installed with a pool or spa by a qualified licensed installer in
accordance with applicable local codes and ordinances, good trade practices, and the
manufacturer’s installation instructions;
3. if the rating plate(s) or serial number(s) are altered or removed;
4. if the product is modified in any way, or non-factory authorized accessories or other
components are used in conjunction with the product;
5. to damage, malfunctions or failures resulting from failure to properly install, operate or
maintain the product in accordance with the manufacturer’s instructions;
6. to damage, malfunctions or failures from abuse, act of nature, accident, fire, flood, freeze,
lightning or the like;
7. to damage, malfunctions or failures resulting from [or due to] connected system control
8. performance problems caused by improper sizing of the heater or electric service
voltage, wiring or fusing;
9. use of any attachment, including any energy saving device not authorized by the
10. to damage, malfunctions or failures from misuse or neglect, including but not limited to,
freeze-ups, operating the heater with the cabinet door off, having flow restrictions or
obstructions between the heater outlet and the pool/spa, or not maintaining a proper
chemical balance (PH level must be between 7.4 and 7.8 and total alkalinity between 100
and 150 PPM. Total dissolved solids (TDS) must be no greater than 3000 PPM)
Coefficient of Performance:
Minimum Circuit Ampacity:
Recommended Breaker Size: