Raypak Standard 133K BTU Analog Heat Pump - R8354TI-A

$4,054.99

IN STOCK
FREE SHIPPING

Model # R8354TI-A

By Raypak


Details

Top

Model # R8354TI-A

Availability Please allow 2 - 3 weeks for delivery - Please allow 2 - 3 weeks for delivery

Product Description

Who ever thought doing something good for the environment would also save you money? It's true! A Raypak heat pump is built with the latest eco-friendly R410A refrigerant that operates more efficiently than R-22. But the most amazing aspect of a heat pump pool heater is its operating efficiency compared to gas heaters. A heat pump operates at 5 to 6 times the efficiency of a standard gas, oil or electric pool heater. If you live in an area where your natural or propane gas costs have out-paced your electricity costs, the savings can be big. The chart illustrates just how much money can save using average energy cost data.

Cabinet

  • Exclusive DuraSteel™ Powder-Coated Cabinet
    Polyester powder-coated, non-corrosive cabinet is more durable than plastic heat pump cabinets. Same rugged steel construction used by all the major air conditioner manufacturers

Evaporator Coil

  • Large Air Coils
    Raised lanced-fin design maximizes heating at lower temperatures. Raypak engineered coils are highly optimized to meet our specific design requirements. From the proper fins per inch to advanced distribution circuiting. We are the only heat pump pool heater company to actually manufacture our own coils.
  • Venturi Fan Cowling
    High-capacity 3000-cfm fan provides unrestricted air flow for better heating. Precision engineered and manufactured
    cabinet design eliminates unwanted air gaps. This means more air over the coil which translates to greater efficiency

Compressor

  • Scroll Compressor
    Scroll compressors are quiet and efficient compared to piston type compressors. They provide higher efficiency, lower sound levels, superior durability and unsurpassed reliability. The unique design of a scroll compressor actually wears in over time, not out!
  • Sound Isolation Pads
    Prevents sound transfer to equipment pad and elevates the base pan to improve water drainage. Its the little details like this that make Rheem products stand out from the
    crowd.

Heat Exchanger

  • Spiral Titanium Tube
    Our spiral titanium tube heat exchanger provides a corrosion-free waterway that can withstand the abuses of harsh pool chemistry. The spiral tube helps reduce deposit build-up and increases efficiency by performing a “scoopand- lift" action.
  • Internal Bypass Valving
    Automatically compensates for normal day-to-day changes in your pool's hydraulics, maximizing heat transfer efficiency.
  • Plumbing Connections
    Off-set 2" PVC union connections are included for ease of installation

Controls - Analog

  • Dual Thermostats
    Allows separate pool and spa temperature settings.
  • Exclusive Direct-Set Thermostat
    Our direct-set thermostat is easy to use; the temperature settings are right on the dial. This eliminates the guess work involved compared with some dials that use a gradient or blue-to-red “swoosh".
  • Remote/Local Switch
    Compatible with the latest automated pool control systems. Exclusive remote/local switch ends the conflict between outside control systems and the heat pump control system. Great for troubleshooting.
  • Diagnostic Lights
    Six LED diagnostic lights keep you informed about the heat pump pool heater operation. Power on, water flow, heat demand, compressor delay, defrost active, low refrigerant pressure.

Controls - Analog

  • Pool/Spa Control
    Your analog heat pump pool heater can be set to have a different target temperature for your pool and spa. This allows you to dial in just the right spa temperature and never have to adjust it again. The pool can be set to a lower, more energy saving temperature.
  • Remote Compatible
    The analog heat pump pool heater can be easily controlled by most two-wire and three-wire remote systems.
  • On Board Diagnostics
    Tells the homeowner if there is a problem. Provides the service technician with detailed diagnostic information.

raypak dimensions

 

Product Specifications

Coefficient of Performance:
5.5
Volts:
208-230
Hz:
60 Hz
Phase:
1
Minimum Circuit Ampacity:
42
Recommended Breaker Size:
60
Min Flow Rate:
15 GPM
Max Flow Rate:
60 GPM
Weight:
387 lbs.
Refrigerant:
R410A
Heat Exchanger:
Titanium
Top

?     Asked on 3/27/2016 by Jose R.

is it true that when temperature are below 60 degrees the electric heater won't heat up? please explain thank you Jose R.

A     Answered on 3/28/2016 by InyoPools Product Specialist Lennox H.

Hi Jose, Once the outside temperature drops below a certain temperature heat stops working or become less efficient. Heat Pump works by taking the heat out of the air and use to heat your pool water.

Top

Review Summary

  (Average 0 out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)