Product Description

RayPak Quiet Technology™ Heat Pumps

Raypak is proud to introduce our newest heat pump product line, the Quiet Technology™ series, with reduced noise levels.  Each comes standard with a titanium heat exchanger.  The Quiet Technology series has been designed  to meet the exacting needs of the pool and spa professional, and includes a stainless steel cabinet, a specially-designed 4-blade quieter slower-spinning fan, and noise levels down to 59 dB!

Features:

Cabinet

• Stainless Steel

Evaporator Coils

• Large Air Coils
  Raised lanced-fin design maximizes heating at lower temperatures. Raypak engineered coils are highly optimized to meet our specific design requirements. From the proper fins per inch to advanced distribution circuiting. We are the only heat pump pool heater company to actually manufacture our own coils.
• Venturi Fan Cowling
  High-capacity 3000-cfm 825 RPM fan provides unrestricted air flow for better heating. Precision engineered and manufactured cabinet design eliminates unwanted air gaps. This means more air over the coil which translates to greater efficiency

Compressor

• Scroll Compressor with Cover
  Scroll compressors are quiet and efficient compared to piston-type compressors. They provide higher efficiency, lower sound levels, superior durability and unsurpassed reliability, with an added cover to further reduce noise. The unique design of a scroll compressor actually wears inover time, not out!
• Sound-Absorbing ABS Base

Heat Exchanger

• Spiral Titanium Tube
  Our spiral titanium-tube heat exchanger provides a corrosion-free waterway that can withstand the abuses of harsh pool chemistry. The spiral tube helps reduce deposit build-up and increases efficiency by performing a “scoop-and-lift” action.
• Internal Bypass Valving
  Automatically compensates for normal day-to-day changes in your pool’s hydraulics, maximizing heat transfer efficiency.
• Plumbing Connections
  Offset 2” PVC union connections are included for ease of installation.

 Controls - Digital

• Pool/Spa Control 
  Your digital heat pump pool heater can be set to have a different target temperature for your pool and your spa. This allows you to dial in just the right spa temperatures and never have to adjust it again. The pool can be set to a lower, more energy saving temperature.
• Remote Compatible
  The digital heat pump pool heater can be easily controlled by most two-wire and three-wire remote systems.
• On Board Diagnostics
  Tells the homeowner if there is a problem. Provides the service technician with detailed diagnostic information

WARRANTY EXCLUSIONS 
This Limited Warranty does NOT apply; 
1. if the product has been moved from its original place of installation, or if the original 
owner no longer owns the property where the original installation was made; 
2. if the product is not properly installed with a pool or spa by a qualified licensed installer in 
accordance with applicable local codes and ordinances, good trade practices, and the 
manufacturer’s installation instructions; 
3. if the rating plate(s) or serial number(s) are altered or removed; 
4. if the product is modified in any way, or non-factory authorized accessories or other 
components are used in conjunction with the product; 
5. to damage, malfunctions or failures resulting from failure to properly install, operate or 
maintain the product in accordance with the manufacturer’s instructions; 
6. to damage, malfunctions or failures from abuse, act of nature, accident, fire, flood, freeze, 
lightning or the like; 
7. to damage, malfunctions or failures resulting from [or due to] connected system control 
devices; 
8. performance problems caused by improper sizing of the heater or electric service 
voltage, wiring or fusing; 
9. use of any attachment, including any energy saving device not authorized by the 
manufacturer. 
10. to damage, malfunctions or failures from misuse or neglect, including but not limited to, 
freeze-ups, operating the heater with the cabinet door off, having flow restrictions or 
obstructions between the heater outlet and the pool/spa, or not maintaining a proper 
chemical balance (PH level must be between 7.4 and 7.8 and total alkalinity between 100 
and 150 PPM. Total dissolved solids (TDS) must be no greater than 3000 PPM)