PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE
Model # 05086-0050
Warranty 1 Year on Parts
Dimensions 8-1/2" X 6-1/4" X 50'
Alternate Part #'s 050860050, PEN05086-0050, STA-30-3009
SwimQuip Underwater Lights(REPLACEMENT ONLY: SwimQuip Niches have been discontinued.)
Standard pool and spa lighting is a must for nighttime pool safety and enjoyment. But their usefulness doesn't end with simply illuminating darkened pools.
Standard pool lights can also enhance your pool and spa's beauty and help create an inviting backyard environment after the sun goes down.
Our AmerQuartz and AquaLight lighting systems have been the standard for quality of light and reliability in underwater halogen pool and spa lighting for decades.
SWIMQUIP UNDERWATER LIGHTS - 12VOLT:
05082-0025(25ft. Cord Length) - 12Volt Light, 300 Watt
05082-0050(50ft. Cord Length) - 12Volt Light, 300 Watt
SWIMQUIP UNDERWATER LIGHTS - 120VOLT:
05086-0025(25ft. Cord Length) - 120 Volt Light, 500 Watt
05086-0050(50ft. Cord Lenght) - 120 Volt Light, 500 Watt
05086-0100(100ft. Cord Length) - 120 Volt Light, 500 Watt
Features:
Product Notes:
Where can I find the replacement bulb for this light as well as dimmensions on the replacement bulb? Also can I replace the bulb in my Swimquip light with a color changing LED bulb?
Reply
Here is a link to the replacement bulb for the swimquip light (120V 500 Watt - NA706) http://www.inyopools.com/Products/00100001005427.htm This page shows dimmensions of the bulb and you may purchase this bulb directly through the link above. Unfortunately at this time there is not a LED replacement bulb available for the swimquip light, all of the current LED replacement bulbs are too large for the Swimquip housing.
Reply
What are the dimensions of this light?
Reply
Total front to back, 7-1/2" (from front of the lens to the back of the light); Front to back, 6-5/8" (Just the copper shell of the light); 8-1/2" wide on the faceplate; 3-3/4" wide at the back of the shell.
Reply
I have an old Anthony pool light in my pool which needs to be replaced, I believe the Anthony light may have been discontinued, do you have a suitable replacement?
Reply
> >The Anthony light has indeed been discontinued and the Swimquip light fits most old Anthony pools underwater lights. The Swimquip light measures 8-1/2" outside diameter, Front of lens to back of light 7 1/2" and shell rear diameter measures 3 - 3/4"
Reply
Will this bulb fit my Sta-Rite Swimquip light.
Reply
Yes. The J & J pure white bulb will fit the Sta-Rite Swimquip lights. Please make certain to order the correct >replacement gasket for the Sta-Rite Swimquip light. The J & J pure white bulbs come with a gasket for the >Pentair Amerilite.
Reply
Do you have the plastic colored covers that will fit over or in the grooves of this light ?
Reply
Hi Rick, The SwimQuip Underwater Light Color Lens Kit (05070-0046) is No Longer Available, and there is no other replacement.
Reply
1 to 2 hrs
Screwdriver, Nut Drivers
2 0
The new light arrived along with a new LED bulb to replace the 500-watt energy eating bulb. The new housing is well made and waterproof with the included rubber seal held on with ten stainless steel bolts. The 50' cord was easy to pull through the existing conduit and hook up the same way the old one was hooked up.
The Most Recent Reviews
(5 out of 5 stars) Replacing shorted out pool light fixture and bulb
Reviewed By: Inyo Customer ()
Made very well and is waterproof as long as you put on a new gasket each time you have to change out your bulb. I ordered a new LED pool light bulb to get rid of the energy eating 500-watt bulb that came with the unit. Change out of the bulbs and pulling the 50' wire through existing conduit was easy.
Was this review helpful to you?