Model # CF6H3-123
Availability Special Order
CF Series self-priming centrifugal pumps are available in 3⁄4 to 3 HP models and feature all bronze construction with an integral hair and lint
strainer. Motors are open drip-proof type, NEMA® Series “C” flange design with a stainless steel shaft extension. The non-clogging semi-open
impeller is coupled to the motor by an adjustable stub shaft. Suitable for outdoor installation. For residential and commercial swimming pools and spas. Maximum suction lift is 8 ft.
- All bronze construction provides exceptional performance under heavy duty swimming pool applications – proven durability for many years
- Available with 5" or 6" hair and lint strainers integral with pump.
- Precision-molded ABS strainer baskets feature locking design for secure fit and are easily cleanable.
- Bronze semi-open, non-clogging impeller is precision balanced for smooth operation and long seal life.
- Designed for easy serviceability – motor, impeller and seal can be removed without disturbing piping.
- Motor components are protected and easily accessible under “control room” end canopy.
Materials and Design:
- Hair and Lint Strainer:
- Integrally cast to pump body
- Bronze body, cover and locking handles
- 5" - 2" NPT Suction Port'
- 6" - 2" NPT Suction Port
- Molded ABS; lock-in design positioned completely below the inlet port of the strainer body.
Pump Body: Volute type, back pull-out
- Port Size = 1.5" NPT Discharge Port
- Material = Red Brass
- Motor Adapter = Bronze, built-in mounting foot
- Impeller = Bronze semi-open type
- Frame Size:
- NEMA "C" flange, 48 frame thru 2 HP
- 3 HP is 56 Frame
- Shaft = Stainless steel, keyed.
- 3/4 - 3 HP, 3450 RPM, open drip-proof, single phase, continuous duty.
- 65 BHP - Split phase
- 95 - 1.65 BHP - Capacitor Start/Induction Run
- 2.20 - 2.60 BHP - Capacitor Start/Capacitor Run
- 3.3 BHP - Capacitor Start/Induction Run
- Bearings = Sealed ball type, permanently lubricated
- Thermal Overload Protection = Internal, automatic reset. 3-phase model requires external thermal overload protector.
- Power Supply Required
- Single phase - 115/230V or 230V only (1.5" to 3 HP)
- Three phase - 230/460 Volts
- Maximum Limits
- Liquid Temperature: 125°F
- Ambient Air Temperature: 122°F
- pH Range: 4 -9.
Port Size (NPT):
2 x 1 - 1/2 in.