$34.99

Qty:

By PureLine


Details

Top

Part # PL0173

Dimensions 31" L x 9" W x 5" D

Alternate Part #'s 59002900, DEX6000DS, R0359200

Product Description

Time to Replace Your DE Grids?

Our DE Grids are used on the most common pool filters including American Products®, Pentair®, Hayward® & Pac-Fab®. Most DE Filters will require 7 Full Grids and 1 Partial Grid. Typically DE grids last about 5 years so if it has been longer than 5 years then now is the time to replace your DE grids.

Things to Consider When Replacing Your DE Grids

  • Most DE Filters Require 7 Full Grids & 1 Partial Grid
  • DE Grids Normally Last 5 Years
  • Commonly Used on Hayward®, Pentair®, Pac-Fab®, and American Products®

Note: Collar has open slot (2 notches). Length is measured from one end of the grid to the other (collar not included).

Mars

Mars

Disclaimer:

All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.

Product Specifications

Commonly Used On:
American, Hayward, Pac-Fab, Pentair, Sta-Rite
Area:
60 sq. ft.
Grid Length:
30 in.
Grid Width:
9-1/2 in.
Full Grid:
PL0183
Top

?     Asked on 9/14/2012by Guest

What is the micron rating for a Unicel element?
 Reply

A  Answered on 9/14/2012 by InyoPools Product Specialist Patrick P.

All Unicel elements & grids have a 20 Micron Rating.
 Reply


?     Asked on 12/18/2012by Guest

How do I know which replacement grids I should order?
 Reply

A  Answered on 12/18/2012 by InyoPools Product Specialist Patrick P.

Typically, the filter label will contain the filter model and square footage of your grids. If the information on the label can not be read, you can measure the length (top to bottom) of the grid and multiply by 2 to get the square footage. For example: A 12" grid length would mean that the square footage is 24. 
 Reply


?     Asked on 8/25/2017by Inyo Visitor

Where is the placement of the small filter grid fit on the filter manifold for a Titan CM 60 sq. ft. Filter Model # 67026000 (American Products)?
 Reply

A  Answered on 8/28/2017 by InyoPools Product Specialist Lennox H.

Hi. The Small Grids is placed in the right available port in the manifold. 
 Reply


?     Asked on 1/28/2019by Bruce

Hi! Is this the grid for the Hayward DE-6000 filter? Do you also sell it as a complete set? TY
 Reply

A  Answered on 1/28/2019 by InyoPools Product Specialist Kevin G.

For your unit, you will need seven of the FG1005 and one of the PG1905.
 Reply


?     Asked on 4/29/2021by Gordon

Do you carry the full size panels for the Hayward DE 6020 ? I only see the short panel offered Thanks Gordon
 Reply

A  Answered on 4/30/2021 by InyoPools Product Specialist Danny R.

I am assuming you are talking about the full grids?  7 are required and you can find them by clicking on the following link... 60 Sq. Ft. Full Grid 30" (7 Required) - FG1005
 Reply


Top
Difficulty

Est. Repair Time

2 to 4 hrs

Tools Needed

Socket Set, Wrench Set

dirty griid

Written on 7/27/2021 by Guest

Opened up the filter, cleaned off the grids, removed the filter. Cleaned in TSP then soaked
grids in 1 gallon of muriatic acid and 15 gallons of water for 2 hours doing 4 at a time
rinsed the grids reassembled and installed new filter. Added DE filter material and all good.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.91  out of 5 stars)
20 Rating
5 star:
 
(19)
4 star:
 
(0)
3 star:
 
(1)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews