$9.99

Qty:

By Aladdin


Details

Top

Part # 3103-0

Manufacturer Code 211

Alternate Part #'s 211, GW9020, 87-423-1010, AEQ211, ALD211, APCHC211

Product Description

Cuff, Hose For 1 1/2" Hose - 211

Top

?     Asked on 7/21/2016by Inyo Visitor

Does this cuff on placed on hose allow the cuff be mounted on hose & then allow the hose end be inserted to vacuum port ?
 Reply

A  Answered on 7/21/2016 by InyoPools Product Specialist Alan M.

The replacement cuff is attached to the end of the vacuum hose. You would need to cut off the off, broken cuff. The new cuff screws on to the hose. You would then be able to use your vacuum hose and connect it to the vacuum port.
 Reply


?     Asked on 1/30/2017by Inyo Visitor

do you have 1 1/4 cuff hose
 Reply

A  Answered on 1/31/2017 by InyoPools Product Specialist Stacey M.

Hello, I apologize, but the lowest we have is 1.50" hose cuff.
 Reply


?     Asked on 2/18/2017by Inyo Visitor

I need a "Male" 1.5 inch Hose Cuff. Does not need to be a Swivel Type. "Female" Cuffs, including Swivel Types, have been great.
 Reply

A  Answered on 2/21/2017 by InyoPools Product Specialist Alan M.

We no longer stock the 1.5" hose mender, but I was unable to find a male hose cuff. I did find a Hose Adapter, 2"mipx1 1/2"hose Male Red. (spx1082z3). I hope this is more along the lines of what you are looking for.
 Reply


?     Asked on 6/19/2017by Inyo Visitor

Is a 1-1/2" hose 1-3/4 outside diameter?
 Reply

A  Answered on 6/29/2017 by InyoPools Product Specialist Lennox H.

Hi. The ID is 1-1/2" and the OD is 1-3/4".
 Reply


?     Asked on 7/15/2017by Joe

I have a hayward W560 leaf canister. My vacuum hoses are 1 1/2". To get the canister inline I need an adapter for the male end of the hose to the male port of the canister. I also need an adapter for the female end of a hose to the female end of the canister.
 Reply

A  Answered on 7/16/2017 by InyoPools Product Specialist Lennox H.

Hi, Joe. The Hayward W560 Canister has two male ends that will connect to the female wend of this Hose Cuff. This Hose cuff will connect to a 1-1/2" pool vac hose.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Old connector was cracked.

Written on 9/22/2023 by Guest

Cut old connector off hose, screwed on new connector.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.34  out of 5 stars)
6 Rating
5 star:
 
(4)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(1)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews