By Hayward Pool Products
Part # 4802-04A
Manufacturer Code SX144DA
Dimensions 17" X 1.5"
Alternate Part #'s SX144DA, 31-150-1242, HAY-051-1393, HAYSX144DA, HPPSX144DA
Lateral Assembly with Center Pipe - SX144DA
***************
THIS ITEM INCLUDES
***************
10 LATERALS ANDTHE HUB & CENTER PIPE MEASURES 17" TALL
a few of the small laterals have a few small sections with some of the fins or small cuts in the small lateral parts are missing could this be causing my filter to be passing a lot of silt type material to be deposited on the pool bottom and actually clouding up pool if i turn off pump for about a day or two the water seems to clear chemicaliy water has been tested several times and was fine i appreciate any help
Reply
Hi Rob, Any kind of crack or damage in the laterals can cause the filter not to work properly. The issue you're experiencing is a sign of the filter not working properly, the sand or lateral may need to be changed.
Reply
What keeps the Lateral Assembly in place in the tank?
Reply
The assembly will clink into the bottom of the tank.
Reply
This rests on a bump on the bottom of the tank and the sand around it keeps it in place
Reply
there is a raised molded pc on the inside bottom of the tank that the bottom hub assembly will fit over
Reply
i purchased from you a multi port valve PL0714 on order # 952554 to replace a ss160 valve.. the new port has a bottom flange that my old one did not. when I put in the center pipe, it seems to be too long, and as a result I can not seat the clamp band properly. can I shorten the center pipe, and if so how much should I remove. thank you peter martin
Reply
We show the correct item to be mfg # 42388207RKIT ( 31-105-1280 )
Reply
