By Zodiac


Details

Top

Part # 3270-016

Manufacturer Code R0374300

Dimensions 36" L x 2" W x 2" D

Alternate Part #'s R0374300, 87-295-1212

Product Description

RAY-VAC HOSE 5/8" VIN With 2 FLOATS

Top

?     Asked on 6/17/2012by Guest

How long is the hose?
 Reply

A  Answered on 6/17/2012 by InyoPools Product Specialist Patrick P.

The hose length is 36" (3 feet).
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Replacing Ray-vac venal hose

Written on 6/25/2020 by Guest

1. Make sure pool pump is off
2. Remove hose section to be replaced by sliding up the mender sleeve cover and removing C-clip at the hose couplers on each end of the hose.
3. Remove hose ends from hose couplers.
4. Place the toothed ring of the mender sleeve kit over the end of the replacement hose.
5. Slide the cover ring of the mender sleeve kit onto the hose coupler -small opened end first.
6. Gently work the hose end onto the hose coupler until the toothed ring is completely past the nob on the end of the hose coupler.
7. Slide mender sleeve cover over the toothed ring until there is enough room on the hose coupler to fit the C-clip.
8. Replace C-clip in the space between the mender sleeve cover and the shoulder of the hose coupler.
9. Repeat steps on the other end f the replacement hose

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
2 Rating
5 star:
 
(2)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews