Part # 3581-0
Manufacturer Code 500C
Dimensions 10-1/8"ID x 12"OD
Alternate Part #'s 500C, ALA306333, 57-423-1004, AEQ500C, ALD500C, APC500C
INYO # 3581-0 ALADDIN # 500C THIS IS AN ADAPTOR RING DESIGNED TO BE USED WITH A PENTAIR AMERLITE THE ADAPTOR RING FITS OVER THE FACE OF THE NICHE AND IS HELD IN PLACE WITH 3 LONG SCREWS WHICH SCREW OUTWARDS TO HOLD THE FACE RING TIGHT AGAINST THE NICHE THE AMERLITE WILL ATTACH TO THE ADAPTOR RING THE SAME WAY AS IT WOULD ATTACH TO A NICHE THIS IS THE CHROME PLATED VERSION OF THE FACE RING DIMENSIONS: OUTSIDE DIAMETER: 12" INSIDE DIAMETER: 9-7/8" THERE IS A RING AROUND THE INSIDE DIAMETER WHICH IS SLIGHTLY LOWER THAN THE REST OF THE ADAPTOR RING. THE OUTSIDE OF THE AMRERLITE FACE RING FITS INTO THIS TO KEEP IT CENTERED IN THE ADAPTOR RING.
*For adapting American AmerLite®, Hayward® AstroLite™/ColorLogic®/CrystaLogic™ and Jandy® CP Series Lights.
I'm trying to install a Pentair Intellibrite 5G on an old Anthony Model NO. 21 niche. Will this work for that?
Reply
Hi, The Anthony model niche is really old and is not standard. Can't confirm if the Pentair Intellibrite will fit, you can try using this adapter ring but it's a long shot. You can try reaching out to Pentair to confirm.
Reply
I have an older pool with a sta rite pool light in it the niche is really small compared to standard. Depth wish and everything a Pentair will fit the niche will this ring make this work? What size niche will this fit into?
Reply
Hi, Michael. Unfortunately, this ring is not compatible with any of the Sta-Rite Niches or fixtures.
Reply
Good morning
I just installed a Jandy Pro Series Watercolor Led light in my pool. Unfortunately, it doesn't fit in the old niche flush. It is sticking out at the bottom about 3/4". I also have an all tile pool.
Can your product fix this problem?
Reply
Hi, Mario. This can work with the Jandy Pro Series Watercolor light.
Reply
