Pump Shaft Seal 5/8" - PSR-200

$11.49

IN STOCK

Part # 5250-104

By U.S. Seal Manufacturing

  4.78 Average  

Details

Top

Part # 5250-104

Manufacturer Code PSR-200

Dimensions 0.89" X 1.25"

Alternate Part #'s 01512-29, 0151229, 10-0002-06-R, 10-0476-00-R, 10-0602-06-R, 10-0802-08-R, 10-1436-00-R, 1013099, 1018565, 17304-0100, 200, 2920060603, 306-1006, 3061006, 3061007, 354231020, 354545, 354545S, 35B1138, 35B1175, 35B1178, 36-1007, 5028003000, 606-78, 6C-200, 92500150, 92509020, A-08A, A08A, A8, AS-200, AS200, AS4702, FF-14, JS-1702, P-M03885, PM03885, PS200, PSG200OEM, PSR-200-OEM, SPX1250XZ2, SPX1250Z2, SPX2700SA, VG-200, VG200

Product Description

This is a common replacement pump shaft seal that fits on many different pool and spa pumps.  Used on the Pentair Challenger, Pinnacle and Dynamo pumps, the Sta-Rite Dura-Glas and Max-E-Glas, Jacuzzi Cygnet and LR / SLR Series, Aqua-Flo Dominator and Tubmaster pumps among others.  Please see the "Parts" tab above for a complete listing of pump makes and models.

Top

?     Asked on 6/18/2019 by Josh Stegner

I have a superflo 1.5hp I need a shaft seal
 Reply

A  Answered on 6/19/2019 by InyoPools Product Specialist Hector F.

Yes, this is the correct shaft seal for your pump model. 
 Reply


?     Asked on 6/4/2019 by Dennis

i have a A.O. Smith motor (HP 1.0 SPL (2 speed) PN 7-186554-01. need to replace the pump shaft seal, and impeller not sure if this is the correct one i need? Looks like S15LR-6 is the replacement motor, not 100% sure on that.
 Reply

A  Answered on 6/6/2019 by InyoPools Product Specialist Hector F.

So these seals and gaskets for the pumps are based on the model of the front pump housing that the motor bolts to. You can call in with that information or you cam email images of that housing to upload@inyopools.com so we can confirm.
 Reply


?     Asked on 5/6/2019 by James powers

Will this work for a turbo king pump #DYNII-NI-1.5
 Reply

A  Answered on 5/6/2019 by InyoPools Product Specialist Hector F.

Yes this is the correct shaft seal for your model pump. 
 Reply


?     Asked on 4/25/2019 by Mark Totten

I have a pentair superflo pump that is not leaking externally but is not drawing enough to fill the pump cavity with water (air pocket approximately tennis ball size and bubbles coming out return jets). Could this be a seal problem?

 Reply

A  Answered on 4/25/2019 by InyoPools Product Specialist Lennox H.

Hi, Mark. The pump shaft seal will NOT cause this issue. I suggest replacing the Cover O-ring - 357255, Drain Plug O-ring - 192115 and or the Union O-ring - 350099
 Reply


?     Asked on 2/26/2019 by FLO Master XP2

Hello, will the shaft Seal PSR-200 works together with the FLO Master XP2 pump? Thks Peter
 Reply

A  Answered on 2/26/2019 by InyoPools Product Specialist Lennox H.

Hi. Yes, this Pump Shaft Seal 5/8" - PSR-200 will fit the FloMaster XP2 pump. 
 Reply


?     Asked on 11/25/2018 by Ken

Need this rubber gasket for Jacuzzi Magnum Force and a couple other items. Do not see this on list. Can you assist?
 Reply

A  Answered on 11/26/2018 by InyoPools Product Specialist Hector F.

Yes, please click here to view the parts diagram for that pump with all seals and gaskets listed. You can also purchase the GOKIT14 which has all of the seals and gaskets for your pump model. 
 Reply


?     Asked on 10/19/2018 by Dick

There are no markings on the pump. It was installed with a polaris system. the motor shaft is 5/8". The motor is a centurion B668. Is it likely that this part will fit?

 Reply

A  Answered on 10/19/2018 by InyoPools Product Specialist Patrick P.

Hi Dick, You have the Letro LA01N Booster Pump and you will require the PSR1000 Shaft Seal. Here is an article we put together on How to Replace a Shaft Seal on a Booster Pump which you may find helpful when you tackle this project.
 Reply


?     Asked on 7/8/2018 by

Will this work for a Stark USA pump model 75038?
 Reply

A  Answered on 7/8/2018 by InyoPools Product Specialist Lennox H.

Hi. Yes, this Pump Shaft Seal - PSR200 will fit the Stark USA Pump model 75038. 
 Reply


?     Asked on 6/3/2018 by tim

I have pump housing part number 347983 is this correct shaft seal for my optiflow nt1 11/2
 Reply

A  Answered on 6/3/2018 by InyoPools Product Specialist Lennox H.

Hi, Tim. Yes, this the correct Pump Shaft Seal for the Optiflo pump. . 
 Reply


?     Asked on 5/30/2018 by Ruth

Is this the correct seal for a Jacuzzi model # S1LRT9-6?
 Reply

A  Answered on 6/3/2018 by InyoPools Product Specialist Lennox H.

Hi, Ruth. This Pump Shaft Seal will fit the S1LRT9-6 model pump. 
 Reply


?     Asked on 5/23/2018 by

I have a dura glas swimming pool pump 518R with a 5/8" shaft. Would I get the pump seal 200?
 Reply

A  Answered on 5/25/2018 by InyoPools Product Specialist Lennox H.

Hi. You could use this Shaft Seal with the Sta-Rite Dura Glas Pump. If you have the Seal Insert, it can just be removed. 
 Reply


?     Asked on 5/2/2018 by wallace simpson

I have a Pentair 2hp 2sp model #DYNII-N2-2 Motor with a DYNMO Model #DYNII-N2 pump. The pump shaft seal between the motor and pump is leaking. Which seal do I need.
 Reply

A  Answered on 5/3/2018 by InyoPools Product Specialist Hector F.

The main shaft seal for the Dynamo pool pump is part number 5250-104 for the generic one or you can get the complete seal kit being the GOKIT46. You can view the parts diagram here if you would like to view the other types of main shaft seals that you can use as well.  
 Reply


?     Asked on 11/16/2017 by Rick

Will this seal fit the Aqua-Flo 05334012-2040 spa pump?
 Reply

A  Answered on 11/16/2017 by InyoPools Product Specialist Lennox H.

Hi, Rick. Yes, this Pump Seal 200 - PSR200 will fit the Aqua-Flo 05334012-2040 model spa pump. 
 Reply


?     Asked on 10/29/2017 by jim

I have a Pentair superflow 2HP pool pump p/n: 340040, SF N1 2A HP, which is leaking at bottom between the pump and motor and I am wanting to know what is the correct repair kit so I can fix it. Thanks!
 Reply

A  Answered on 10/30/2017 by InyoPools Product Specialist Lennox H.

Hi, Jim. Replacing the Pump Seal will resolve your issue. This Pump Seal - PSR200 is the correct size for that model pump. 
 Reply


?     Asked on 8/1/2017 by cindy

what are the measurement on the impeller end of the seal ID?
 Reply

A  Answered on 8/2/2017 by InyoPools Product Specialist Lennox H.

Hi, Cindy. You can view the dimensions of the pump seal by clicking on this Product Dimensions link.
 Reply


?     Asked on 7/26/2017 by Duane

Will this fit the : C1245
 Reply

A  Answered on 7/26/2017 by InyoPools Product Specialist Alex V.

Duane, The seals are based on the pump housing not the motor. We will need the pump model number. 
 Reply


?     Asked on 6/26/2017 by Larry

Hello, I have a leak on the shaft seal on my Optfl N1 1 HP HD Part number 347982 serial # 0360070130040L Date 3/11/13 Site. E I looked online and i want to confirm that the replacement seal is part # 5250 - 104 Mfg code PSR200 5/8" is the correct seal before I purchase it? also is there any other parts I should purchase when I change the seal ? Thanks Larry
 Reply

A  Answered on 7/29/2017 by InyoPools Product Specialist Alex V.

Larry, Yes, this is the correct seal for the Pentair OptiFlo pump. 
 Reply


?     Asked on 6/11/2017 by Brent Capps

does this fit an optiflo pn 340073sr
 Reply

A  Answered on 6/11/2017 by InyoPools Product Specialist Patrick P.

Yes this is the correct seal for the optiflo 340073sr
 Reply


?     Asked on 6/10/2017 by WJ

I have a Jacuzzi pump/ filter model 100-515LRT 9-3-HK6 mfg date 03Feb05 and I need a pump seal 1.5hp
 Reply

A  Answered on 6/13/2017 by InyoPools Product Specialist Lennox H.

Hi, WJ. Based on that model number and mfg date the PSR200 seal will fit.
 Reply


?     Asked on 6/8/2017 by Robert W

the motor shaft is 1/2 " is this the correct seal?
 Reply

A  Answered on 6/11/2017 by InyoPools Product Specialist Lennox H.

Hi, Robert. The pump seal is specific to the pump housing, I will need to know the model of the pump housing in order to confirm if this pump seal will fit into the seal plate.
 Reply


?     Asked on 4/16/2017 by Alex

Hi, is this psr 200 shaft seal will fit a Jacuzzi pump model S1KHMR 9-6 serial # 074322? If not which one do i need? Thanks.
 Reply

A  Answered on 4/18/2017 by InyoPools Product Specialist Lennox H.

Hi, Alex. I was unable to locate a Jacuzzi pump with the model S1KHMR. If you can verify the model number and or send us photos of the pump we can try to identify the pump.
 Reply


?     Asked on 4/3/2017 by Rodolfo Molina

Hi, is this PSR 200 shaft seal will fit a Jacuzzi S15lr6 1.5h pump?. I have been buying different ones but none fit since the form of the base is very particular. Is there a kit for this pump with all the parts to be replaced to avoid leaking? Regards,
 Reply

A  Answered on 4/5/2017 by InyoPools Product Specialist Scott W.

Yes, that would be the correct replacement shaft seal.
 Reply


?     Asked on 12/28/2016 by mark wiemann

What is the difference between PSR200 and PSR200v
 Reply

A  Answered on 12/29/2016 by InyoPools Product Specialist Adam Y.

Good morning Mark, There is no difference.
 Reply


?     Asked on 12/25/2016 by Robert

does this fit a DuraGlas pool pump/ I have a 56y frame square flange 3/4 hp motor that i am going to replace, i understand that i need to change the seal as well.
 Reply

A  Answered on 12/27/2016 by InyoPools Product Specialist Andy O.

Hi Robert- Unfortunately with the Dura-glas there are a two possible seals that would depend on the age of the pump. You will either need to know if it is pre-1998 or 98-current, or take your pump apart and see if your seal plate has the copper or stainless steel cone or not.
 Reply


?     Asked on 7/30/2016 by Dave

If this part doesn't fit can I return it?
 Reply

A  Answered on 8/1/2016 by InyoPools Product Specialist Lennox H.

Hi Dave, Unfortunately, once this part has been installed it can not be returned. If you can provide us with the manufacturer and model of the pump housing I can try to locate the correct pump seal.
 Reply


?     Asked on 7/18/2016 by

I have a Challenger 2HP PENTAIR PUMP CF11-N2-2F .Is a PSR200 shaft seal correct? Is a GO-KIT5 the correct repair kit?
 Reply

A  Answered on 7/19/2016 by InyoPools Product Specialist Alan M.

The Pump Seal 200 PSR 200 is the correct replacement shaft seal for the Pentair Challenger Pump.
 Reply


?     Asked on 7/8/2016 by

Will this seal fit my Sundance Theramax II 6500-126 ?
 Reply

A  Answered on 7/13/2016 by InyoPools Product Specialist Lennox H.

Hi, Based on how these pumps are labeled we can only locate replacement part based on the volute part number. If you can provide that number we can confirm if this PSR-200 seal is the correct replacement.
 Reply


?     Asked on 5/14/2016 by paul

Hello, will the psr 200 seal fit my aqua flow 20-0108x , it has a 91693601 impeller, it's a Flowmaster pump model 02110408 serial is 2189059,it has both name brands on it ,just want to order the right one first, thanks
 Reply

A  Answered on 5/17/2016 by InyoPools Product Specialist Lennox H.

Hi Paul, This shaft seal will fit the Aqua flow and Flow Master pumps.
 Reply


?     Asked on 4/30/2016 by

Will the psr 200 fit on challenger P./N. 35-5459?
 Reply

A  Answered on 4/30/2016 by InyoPools Product Specialist Scott W.

Yes, that's the generic shaft seal for the challenger.
 Reply


?     Asked on 3/31/2016 by Stan

I have Sta-Rite Pump Model No: P6E6D-205L. Which seal kit (generic part#) do I need for it? The motor that connects to it is QC-1072 (original motor model: K48K2PA105C1). Thank you!
 Reply

A  Answered on 3/31/2016 by InyoPools Product Specialist Hector F.

This model pump is the Max E Pro so the seal kit is part number gokit79.
 Reply


?     Asked on 3/31/2016 by Stan

Which specific seal kit (generic part number) do I need for QC-1072 pool pump motor? Thank you.
 Reply

A  Answered on 3/31/2016 by InyoPools Product Specialist Hector F.

The seal kits are not based off of the motor model but the model of the front pump housing that the motor mounts to.
 Reply


?     Asked on 11/2/2015 by mark

Appears I have an older Jacuzzi pump, 94024110. Model looks to be an LR type with model # S1-LR-6-S1. Do you know if it uses this same seal? Thanks!
 Reply

A  Answered on 11/3/2015 by InyoPools Product Specialist Lennox H.

Hi Mark, The Pump Seal 200 5/8" (PSR200) would be the correct seal for the older Jacuzzi LR pumps.
 Reply


?     Asked on 9/28/2015 by ANDY

Will this seal kit fit aqua flo flo-master xp2 1hp, model#06620000-1?
 Reply

A  Answered on 9/28/2015 by InyoPools Product Specialist Robert M.

Hello Andy - Part number 5250-104 will fit the Aqua Flo Flo-Master XP2.
 Reply


?     Asked on 6/17/2015 by Chris

Will this seal work on a Blue Devil B8386. I've been searching for a week and have found nothing yet. If it does not work can you point me in the right direction? THX, Chris
 Reply

A  Answered on 6/19/2015 by InyoPools Product Specialist Lennox H.

Chris, Based on the information found this Pump Seal 200 (PSR 200) will work on the Blue Devil Pump.
 Reply


?     Asked on 6/4/2015 by Mickey Moryl

Looking for replacement seal and orings for Optiflo Plastic Pump Model CPT-N!-1.5 part # 454545 & 357255
 Reply

A  Answered on 6/4/2015 by InyoPools Product Specialist Patrick P.

Hi Mickey, You would require the shaft seal on this page for the Optiflo pump. For the o-rings you would need a quantity of two of the 357 O-ring and a quantity of one of the 223 O-ring.
 Reply


?     Asked on 12/17/2014 by

Is there any thing special when installing this seal?
 Reply

A  Answered on 12/17/2014 by InyoPools Product Specialist Robert M.

Our guide on "How To Replace a Pool Motor Shaft Seal" will detail the instructions for the shaft seal.
 Reply


?     Asked on 11/12/2014 by

One measurement on your description says 1.25". Looking at the picture the hole is 5/8" so what is the 1.25"? This looks like my seal but nothing on my 5/8" seal measures 1.75". Looking at the proportions on the picture nothing looks 1.75"
 Reply

A  Answered on 11/12/2014 by InyoPools Product Specialist Alex V.

The 1.25" measurement refers to the outside diameter of the shaft seal.
 Reply


?     Asked on 7/10/2014 by Guest

Will this shaft seal work on an ARNESON poolsweep, model 1093014400 with 1081 pool motor?
 Reply

A  Answered on 7/10/2014 by InyoPools Product Specialist Patrick P.

Yes this shaft seal does work on an Arneson Pool Sweep
 Reply


?     Asked on 1/25/2012 by Guest

How do I change the shaft seal on my pool pump?
 Reply

A  Answered on 1/25/2012 by InyoPools Product Specialist Patrick P.

Changing the shaft seal is quite simple. Here's How To Replace a Pool Motor Shaft Seal.
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Pliers, Adjustable Wrench

Sent wrong seal by another company

Written on 9/24/2018 by Guest

Rebuilt starite 3/4 hp pump
Bought kit from another company but the seal didn't fit
Called inyo and they said I needed ps200 seal which fit perfectly
Pump is running leak free

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Nut Drivers

The old pump seal was leaking

Written on 8/2/2018 by Guest

I shut the valves, drained the filter, disocnnected the pump, removed the housing, removed the impeller, removed the old seal and ceramic, replaced with the new seal and ceramic, replaced the impeller, replaced the housing, reconnected the pump, refilled the filter, and tested!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers

Leaky pump seal

Written on 10/10/2017 by Guest

Remove and discard used impeller. Remove and replace wet end housing seal. Remove rust from motor shaft using emery cloth and grease lightly. Install wet end housing careful not to touch ceramic surfaces. Screw impeller not to tight as motor spin direction will keep it tight. Reassemble pump using new o rings and Teflon lube such as Aladdin magic lube

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Socket Set

Loud motor

Written on 5/8/2017 by Guest

I needed to change the motor out and the seal should always be changed when ever touching seal. This part was an exact fix at an excellent price and service is alway great here

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

2 to 4 hrs

Tools Needed

Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Bearing puller

Noisy hot tub jet pump

Written on 2/13/2017 by Guest

I wanted to have a set of bearings and a seal on hand for replacement during my next regular service of the hot tub.
Being over 25 years old, I had some difficulty verifying the necessary parts, and got excellent guidance online from INYO pools. Ordered parts which arrived in days and the following weekend, drained the tub for cleaning and a water change.
I wrestled the pump out and disassembled and cleaned the motor. Replaced the bearings and put in a fresh seal as always.
Very pleased to have the correct parts on hand for the job, and it went as smoothly as one could hope.
Thank you INYO pools, I will be back next time I need anything and will suggest you to anyone who needs pool and spa parts and supplies.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.78  out of 5 stars)
22 Rating
5 star:
 
(17)
4 star:
 
(5)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews



















Top