$379.99
Part # 4600-0022
Manufacturer Code 170022
Dimensions 25.5" H
Alternate Part #'s 170022, 14-110-1568, AMP-051-1079, PEN170022
Replacement Lid for the Pentair FNS Plus 60 (170022).
Will this Plus lid fit on 60 FNS non plus bottom?
Reply
Good day. I called and spoke to Pentair Technical ( 800-831-7133 ) and was told that the lid for the FNS Plus WILL NOT fit the older FNS. THey also said that the lid for the FNS is no longer made. If it has failed, you would either need to search the net for someone who has one in their backroom, or purchase a whole new filter.
Reply
Is this a suitable replacement for the 180009 FLT FNS PLS 60? I went to a pool supply house and they said it was a discontinued item. It is only 7 years old manufactured 10/18/2008.
Reply
John- The Tank Lid, 60 Sq Ft Fns Plus (170022) part # 4600-0022 is the correct replacement lid for your FNS Plus 60 Sq Ft Filter 180009.
Reply
I have a Pentair FNS Plus 60 DE filter and the lid has developed a crack. The part number on the lid is 190029 series D but I cannot find that part # as a replacement. Is the new part # 17022?
Reply
Yes, this is the correct lid for your model filter.
Reply
Do you (or anyone) sell the tank lid for the Nautilus FNS 60 DE filter ? It is a fiberglass lid, black color originally that joins to the base with a two piece clamp. I think they installed a lot of these back from 1990 - 2005 or so.
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pentair FNS Plus 60 Tank Lid - 170022")
Hello, unfortunately, the lid for the Pac Fab Nautilus FNS filter is no longer fabricated with no replacement. You may be able to locate a used one somewhere or maybe consider replacing the entire filter with a Waterway Crystal Water 60 sq. ft. D.E. filter
Reply
Less than 1 hr
Adjustable Wrench
It was easy, just isolated the pumps, pulled the drain plug and then loosened the lid clamp until it dropped below the lid bottom. I then lifted the lid off, and while I had the lid off I cleaned the filter elements with a hose and water. After cleaning the filter elements, I replaced the lid with the new one purchased from INYOPOOLS, and removed the pressure gauge from the old cover and screwed it into the new lid (located on top of the lid). Closed the drain for the filter, replaced the clamp around the bottom of the lid and tightened to the previous position.
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Good fast service. Great price.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Perfect fit
Was this review helpful to you?