$218.35
Part # 4706-0
Manufacturer Code SP07122
Dimensions 8" L x 7.5" W x 13" D
Alternate Part #'s HAY06247, SP07122, SP712-2, SP7122, SP712A2, 26-150-2000, HAYSP07122, HPPSP07122
THIS IS A HAYWARD TOP MOUNT THREADED VALVE "V" THREADS, THREAD DIAMETER IS 6" VALVE COLOR IS BLACK "MODEL SP 712 2" ON LABEL, "SP 712-A-2" ON BODY ..... USED ON PAC FAB TA30,40,50,60 MADE BEFORE NOV 1, 1991 ORIGINAL VALVE WAS EITHER WHITE OR BROWN ..... WILL REPLACE (PORT ARRANGEMENT MAY VARY) 4600-1124 PAC FAB VALVE (26-1124) ..... VALVE POSTITION (CLOCKWISE FROM TOP) STARTING ABOVE THE WASTE PORT WASTE, CLOSED, BACKWASH, RECIRC, RINSE, FILTER 4706P PRAHER VALVE (TM-12-A) ..... PORT ARRANGEMENT (CLOCKWISE FROM TOP) 1ST SIDE - WASTE PORT WITH SIGHT GLASS 2ND SIDE - NO PORTS 3RD SIDE - PUMP PORT & RETURN TO POOL PORT (PUMP ... PORT IS DIRECTLY ABOVE THE RETURN PORT) 4TH SIDE - NO PORTS (SIGHT GLASS & THREADED HOLE ... FOR PRESSURE GAUGE ARE LOCATED HERE ..... INCLUDES SIGHT GLASS WITH GASKET 1/4" PLUG INSTALLED IN PRESSURE GAUGE HOLE PRESSURE GAUGE IS NOT INCLUDED HEIGHT IS ?? (EXCLUDING HANDLE)
Top Mount Valve, "V" Threads Tagelus - SP07122 Discontinued by Manufacturer Replace with Multiport Valve "V" Thread 1-1/2" FPT - TM-12-A
Can I use this model, SP07122 flo valve, to replace my VERY OLD SP712-A-13 flo valve?
Reply
Hi Judy, This would not be the correct replacement valve, you would require the Hayward SP0712A13 Replacement Valve.
Reply
does this replace the model # sp712
Reply
Hello, There are several models of SP712 that are of varying sizes. If you can provide the suffix of numbers or letters after the SP712 on your specific valve or identify the filter model the valve fits to then we can match the correct SP712 for your installation.
Reply
What will replace a hayward SP-711-13 vari-flo control vale assembly?
Thank you
Reply
Michael, The SP711 was replaced with the Hayward SP0714T valve.
Reply
The Most Recent Reviews
0 3
(5 out of 5 stars) It looks like the right one
Reviewed By: Kermit B. from longmont, CO ()
It looks like the right one if the flange is big enough on the bottom, it has been to cold here to try and change it out but will try by weeks end.
Was this review helpful to you?