$43.76

Qty:

By Sta-Rite


Details

Top

Part # 5052-040

Manufacturer Code 17500-0003

Dimensions 5" L x 5" W x 2" D

Alternate Part #'s 17500-0003, 175000003, 35-102-1654, PEN17500-0003, PEN175000003

Product Description

INYO # 5052-040 STA-RITE # 17500-0003 GENERAL DESCRIPTION: THIS IS ROUND, CLEAR LID WITH 4 TABS ON TOP THIS IS USED ON THE STA-RITE ABG ABOVE GROUND POOL PUMP

*******************************************************************************

SPECS: SHAPE: ROUND THIS HAS FEMALE THREADS FOR MOUNTING ON THE PUMP. INSIDE OF THE THREADS THERE IS A SMALL FLANGE. THE LID O-RING FITS BETWEEN THIS FLANGE AND THE THREADS EACH OF THE 4 TABS IS ABOUT 1-1/2" LONG X 1/2" WIDE MATERIAL: CLEAR PLASTIC MOUNTING STYLE: FEMALE THREADS OUTSIDE DIAMETER: 5" (A) INSIDE FEMALE THREAD DIAMETER: 4-3/4" HEIGHT: 2-1/8" (B) MAXIMUM HEIGHT HEIGHT: 1-3/8" 1-3/8" NOT COUNTING THE TOP TABS

*******************************************************************************

MARKINGS: 17500-0003 IS MOLDED INTO THE LID AND VISIBLE FROM ABOVE

Top

?     Asked on 8/22/2015by Kelly Loughridge

Is this compatible with Intex above ground sand filter?
 Reply

A  Answered on 8/25/2015 by InyoPools Product Specialist Lennox H.

Hi Kelly, The Trap Lid (17500-0003) can not be with an Intex Above Ground Pool Sand Filter. It can only be used with the Sta-Rite ABG Series Pump.
 Reply


?     Asked on 7/2/2016by Ken

Will this fit STA-RITE MPRA6E-147L pump / filter and does it come with the O-Ring? Thank you.
 Reply

A  Answered on 7/2/2016 by InyoPools Product Specialist Alex V.

Ken, You can find the lid for your pump model on here. It is key #12. The lid does not come with an o-ring.
 Reply


?     Asked on 4/8/2019by mike

will this cap fit a hayward pump.
 Reply

A  Answered on 4/8/2019 by InyoPools Product Specialist Lennox H.

Hi, Mike. This Trap Lid - 17500-0003 will not any Hayward pump. 
 Reply


?     Asked on 3/25/2020by Dave

Back in 2008, I bought a STA=Rite above ground cartridge model PRC50 or 5PRC50 orPRC75 or 5PRC75 with a PTM/PRC/PRD assembly. I recently broke the plastic trap lid which looks like the one pictured here. Do you know if it is the equivalent of the one that I broke?
 Reply

A  Answered on 3/25/2020 by InyoPools Product Specialist Patrick P.

Hi Dave, There were several different pumps that were paired up with the PRC filters. There should be a part # embossed into your plastic lid, could you supply that to us? Or if you want to send a few photos of your pump that would be helpful. To supply the part # or photos simply click the reply link below.
 Reply

  • Commented on 3/25/2020 by Product Owner

    Thank you for your reply. It is 17500 - 0003.
     Reply

    • Commented on 3/25/2020 by InyoPools Product Specialist Patrick P.

      Ok great! Than this is the proper lid.
       Reply


?     Asked on 4/16/2020by Michael

Will this lid fit a Calimar 1-1/2 HP pump?
 Reply

A  Answered on 12/11/2020 by InyoPools Product Specialist Megan C.

Unfortunately, we do not offer the parts to the CaliMar product line it is exclusive to the other companies. 
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews