Model # 4708-0
Manufacturer Code TM-12-E
Alternate Part #'s TM12E, 26-253-1010, PRTM12E
VALVE COLOR IS BLACK "MODEL NO. TM-12" ON COVER, "TM-12-E" ON BODY ..... USED ON ..... WILL REPLACE 4708S STA-RITE VALVE (14962-1015) ..... VALVE POSTIONS (CLOCKWISE FROM TOP) STARTING ABOVE THE WASTE PORT WASTE, CLOSED, BACKWASH, RECIRC, RINSE, FILTER (WINTERIZE IS ALSO SHOWN BETWEEN RINSE & FILTER) THIS IS A PRAHER TOP MOUNT BOLT ON VALVE PRAHER# TM-12-E (1-1/2" MPT VERSION) FLANGE DIAMETER IS ABOUT 9-5/16" 8 BOLT HOLES IN FLANGE,ABOUT 2-5/8" BETWEEN HOLES HEIGHT IS 9-1/4" ..... PORT ARRANGEMENTS (CLOCKWISE FROM TOP) 1ST SIDE - WASTE PORT WITH SIGHT GLASS 2ND SIDE - NO PORTS 3RD SIDE - PUMP PORT & RETURN PORT (PUMP PORT IS .. OFFSET TO TOP & LEFT OF RETURN PORT) 4TH SIDE - NO PORTS (SIGHT GLASS & THREADED HOLE .. FOR PRESSURE GAUGE ARE LOCATED HERE) ..... INCLUDES SIGHT GLASS WITH GASKET 1/4" PLUG INSTALLED IN PRESSURE GAUGE HOLE NO PRESSURE GAUGE INCLUDED (1) VALVE TO FILTER GASKET (14962-0021 EQUIVALENT)
my sta-rite filter head 14962 cracked over the winter. (pressure gauge hole) Is this the replacement part...and what is the cost to ship to Ontario?
Reply
Bob, This will the the correct replacement Multi-port valve for your 14962 model. Can you reply with the address that you would like the part ship to and we can prepare a quote for you with shipping.
Reply
Is this what I need? I have a swim quip wc27-92
Reply
Hi, Ken. The WC27-92 cross references to the SwimQuip Skimmer, not a valve.If you can provide the filter or valve model I can locate the replacement valve.
Reply
I have an old sta-rite sand filter which requires a new valve body. The only identification I see on the valve is Swimquip wc27-91. Wondering if this would be a suitable replacement and if so, the cost of shipping to postal code B0N2H0, Nova Scotia, Canada.
Reply
Yes, this would be the correct replacement valve and the shipping cost would currently be approximately 70 dollars.
Reply
I have a swimquip mark iv filter system. #14982-18 is embossed on underside of valve top and #14962 is embossed on body assy. Is valve top mount #4708-0 a replacement valve for my system and if so would you send it to me at Pointe Claire, Quebec Canada Postal code H9R1P5. Thank you for any info or assistance on this issue.
