By Custom Molded Products
Part # 4202-11
Manufacturer Code R240058
Dimensions 7" L x 5" W x 1" D
Alternate Part #'s 240058, 934, R240058, 51-555-1020
UNIVERSAL WEIR LENGTH: 7 1/4" WIDTH : 5 1/4" THICKNESS: 1 1/8" THIS IS A SPRING LOADED WEIR WHICH IS COMPRESSED INSIDE THE WEIR & HAS A PLASTIC WIRE THAT HOLDS THE SPRING. DO NOT PULL WIRE UNTIL WEIR IS IN PLACE. INCLUDES: FOAM
Can you tell me how far out the spring loaded pegs are? I currently have a 7-3/4" long weir that will not close all the way because there is an A/B epoxy patch around the skimmer cold joint. I want to order a skimmer that is about a 1/2" shorter that will leave a gap on either side to allow the weir to close all the way. This can only be accomplished if the spring loaded pegs stick out at least 1/2" on each side. Can you confirm how long the pegs stick out? Thank you!
Reply
Here is the best information that I can provide to you.UNIVERSAL WEIR LENGTH: 7 1/4" WIDTH : 5 1/4" THICKNESS: 1 1/8" THIS IS A SPRING LOADED WEIR WHICH IS COMPRESSED INSIDE THE WEIR & HAS A PLASTIC WIRE THAT HOLDS THE SPRING. DO NOT PULL WIRE UNTIL WEIR IS IN PLACE. INCLUDES: FOAM
Reply
