By Hayward Pool Products
Part # 6226-0900
Manufacturer Code IDXL2BKP1930
Dimensions 16" L x 6" W x 4" D
Alternate Part #'s IDXL2BKP1930, 47-150-1985, HAYIDXL2BKP1930, HPPIDXL2BKP1930
Bezel Keypad Assembly (SP) IDL2 - IDXL2BKP1930
**Note: All IDL2 and IDL units manufactured after 9/20/2004.**
Does this part fit the H400IDL? I don't know the built date of the unit but its serial number is 31042300
Reply
Hi Kevin, For a H400IDL you will require the IDXCLPA1930 Bezel and Keypad also here is a link to Hayward H400IDL Parts Diagram which may be helpful.
Reply
2 questions. Is this the part number for H250idpl2 and does it include the display board like it shows in the picture. Thanks
Reply
Hi, Bob. This Keypad Assembly will fit that model heater depending on the date it was manufactured (after 8/19/2002 production, starting SN #20840098).
Reply
Is this part number for HP150ED2? Old heater I know but looking for the correct part. Thanks
Hi Hannah, For an H150ED2 you will require this HAXCPA1932 Control Bezel Assembly and not the item on this page.
Reply
I have a Hayward H400IDL heater serial # 40635368 and I need a new control panel. Could you tell me which one is the correct one ?
Reply
The correct panel for your Hayward H400IDL is the Bezel/Touchpad Assembly - IDXLCPA1930
Reply
I have Hayward heater H250 can only raise temperature to 82 will this correct that problem or what can cause this
Reply
It is recommended that you have a professional do a service call as it could be a number of things preventing a higher temp. Any error codes? This could be sensor related but it could also be flow related. There really is no way for us to diagnose the issue based on only getting to 82*
Reply
