By Hayward Pool Products


Details

Top

Part # 3795-105

Manufacturer Code WG1048EW

Alternate Part #'s WG1048EW

Product Description

INYO # 3795-105 HAYWARD # WG1048EW THIS IS COMPLIANT WITH THE ASME/ANSI A112.19.8-2007 REGULATIONS AS SPECIFIED BY THE VIRGINIA GRAEME BAKER POOL AND SPA SAFETY ACT THIS IS A VGB-2008 COMPLIANT COVER

************************************************

GENERAL DESCRIPTION: 8" ROUND RETROFIT MAIN DRAIN COVER, WHITE

************************************************

BASIC SPECS: CENTER TO CENTER SCREW HOLE MEASUREMENT: 6" USAGE: APPROVED FOR WALL OR FLOOR USAGE SPECS SHOWN BELOW ARE FOR A SINGLE UNIT FLOOR: 72 GPM LIFE: 7 YEARS TOTAL OPENING: 8.1 SQ INCH 37.8 GPM @ 1.5 FPS

************************************************

DETAILED DESCRIPTION: THIS IS THE HAYWARD WG1048EW MODEL ROUND WALL COVER THIS IS AN ANTI-ENTRAPMENT RETROFIT COVER AND SCREWS THIS IS VERY SIMILAR TO THE WGX1048E FLOOR COVER BUT IS RATED AT A LOWER GPM THIS IS LISTED AS A WALL COVER BUT AS INDICATED BY THE LABELING ON THE TOP IT MAY BE USED FOR FLOOR OR WALL, BUT AT THE LOWER RATED GPM THE TOP IS SOLID WITH A GRATED OPENING ALL ROUND THE OUTSIDE THERE ARE A LARGE NUMBER OF ROUND HOLES IN THE TOP MATERIAL: PLASTIC COVER, STAINLESS STEEL SCREWS COLOR: WHITE SHAPE: ROUND

************************************************

COVER DIMENSIONS: COVER OUTSIDE DIAMETER: 7-3/4" (A) (MAIN FLANGE RING) COVER TOTAL HEIGHT: 1-5/8" (B) MAXIMUM HEIGHT ABOVE MAIN DRAIN BODY: 1-1/2"

************************************************

SCREW HOLES: 2 SCREW HOLES SPACED 6" APART MEASURED AT THE CENTER OF THE HOLE

************************************************

SCREWS: THERE ARE 4 SETS OF SCREWS INCLUDED THIS ALLOWS THE COVER TO BE USED WITH THE VARIOUS HAYWARD ROUND MAIN DRAINS AND FRAME AND COVERS, BOTH CURRENT AND OLDER VERSIONS 2 SCREWS - #10-24 X 15/16" MACHINE THREAD (PART# WG1030Z2AM SET OF 2) 2 SCREWS - #10-24 X 1-1/4" MACHINE THREAD (PART# WG1030Z1AM SET OF 2) 2 SCREWS - #12 X 1-1/2" SELF TAPPING (PART# WG1030Z2A SET OF 2) 2 SCREWS - #12 X 1-1/4" SELF TAPPING (PART# WG1030Z1A SET OF 2)

************************************************

MARKINGS: HAYWARD WG1048EW IS MOLDED INTO THE COVER THE SPECS REQUIRED BY THE VGB-2008 LAW ARE ALSO MOLDED ON THE COVER