By AquaStar Pool Products


Details

Top

Part # 3816-202

Manufacturer Code LP8SBVVGB102

Alternate Part #'s LP8SBV102, LP8SBVVGB102

Product Description

INYO # 3816-202 AQUASTAR # LP8SBVVGB102 THIS IS COMPLIANT WITH THE ASME/ANSI A112.19.8-2007 REGULATIONS GENERAL DESCRIPTION: THIS IS A COMPLETE ANTI-ENTRAPMENT MAIN DRAIN SUMP FOR VINYL LINER AND FIBERGLASS POOLS THIS IS THE LOW PROFILE VERSION MATERIAL: PLASTIC BODY, RING, AND COVER, STAINLESS STEEL SCREWS COLOR: BLACK SHAPE: ROUND

***********

SUMP BODY DIMENSIONS

***************

HEIGHT: 6-1/2" (BODY ONLY - NOT INCLUDING RING) TOTAL HEIGHT: 6-29/32" (B) (TOTAL WITH RING ATTACHED) MAXIMUM SUMP DIAMETER: 9" (A) THERE IS A 2" SLIP PORT IN THE BOTTOM AND ONE IN THE SIDE (2) ADDITIONAL 1" KNOCK OUTS ARE INCLUDED IN THE BOTTOM THE 2" PORTS HAVE FEMALE THREADS ON THE INSIDE AND A 2" MPT PLUG IS INCLUDED TO CLOSE ONE OF THE PORTS A 2"X 1-1/2" SLIP REDUCER BUSHING IS ALSO INCLUDED FOR USE WITH 1-1/2" PVC PIPE THE SUMP BODY COMES WITH A RUBBER GASKET ATTACHED TO THE BODY ALREADY.

*************

VINYL SEALING RING

*************

THIS IS LARGER THAN A STANDARD HAYWARD VINYL LINER RING. STANDARD ROUND SHAPE WITH 8 HOLES A RUBBER GASKET IS PRE-GLUED TO THE RING OUTSIDE DIAMETER: 8-7/8" INSIDE DIAMETER: 7-1/2" THICKNESS: 3/8" (ADD ANOTHER 1/16" FOR THE GASKET) FROM CENTERLINE TO CENTERLINE THE HOLES ARE 8-1/4" FROM THE HOLE ON THE OPPOSITE SIDE OF THE RING

*************

ANTI ENTRAPMENT COVER

*************

THIS USES THE LP8AV102 LOW PROFILE COVER COVER OUTSIDE DIAMETER: 7-1/2" COVER HEIGHT: 1/2" SCREW HOLES: 7" CENTER LINE TO CENTER LINE MEASUREMENT MARKINGS: "LP8AV-101 THRU 108" MOLDED ON THE COVER THE ANSI SPECS ARE ALSO MOLDED ON THE COVER

*************************

ANSI SPECS

****************************

THESE ARE ALSO MOLDED INTO THE TOP OF THE COVER FOR MULTIPLE DRAIN USE ONLY - SUBMERGED SUCTION OUTLET FLOOR: 100 GPM WALL: 70 GPM FLOOR: 200 GPM DUAL SYSTEM WALL: 140 GPM DUAL SYSTEM LIFE: 5 YEARS ASME/ANSI 112.19.8-2007 USPC LISTED