$392.99
By AquaStar Pool Products
Part # 3816-303
Manufacturer Code RWAV12103
Alternate Part #'s RWAV12103
Availability This Main Drain Has Been Recalled and is No Longer Available
************************************************
GENERAL DESCRIPTION: 12"X 12" SQUARE RETROFIT MAIN DRAIN COVER, LIGHT GRAY************************************************
BASIC SPECS: 2 OF THE SIDES HAVE 3 HOLES WITH 1 IN THE CENTER 2 OF THE SIDES HAVE 5 HOLES WITH 1 IN THE CENTER SEE BELOW FOR DETAILS USAGE: APPROVED FOR FLOOR OR WALL USAGE SPECS: SPECS SHOWN ARE FOR A SINGLE UNIT FLOOR: 361 GPM @ 1.3 FPS WALL: 361 GPM @ 1.3 FPS LIFE: 5 YEARS TOTAL OPENING: 85.2 SQ INCH 400 GPM @ 1.5 FPS************************************************
DETAILED DESCRIPTION: THIS IS A 12" X 12" SQUARE REPLACEMENT COVER THIS IS AN ANTI-ENTRAPMENT RETROFIT COVER AND SCREWS THIS HAS SCREW HOLES DESIGNED TO LET IT REPLACE A WATERWAY, HAYWARD OR PENTAIR 12" X 12" SQUARE COVER THIS HAS A REGULAR GRATED SHAPE BUT THE COVER SLOPES SLIGHTLY UPWARD FROM THE OUTSIDE TOWARD THE CENTER. THERE ARE A LARGE NUMBER OF SEMI-CIRCULAR EXTENSIONS RUNNING IN ONE DIRECTION ON TOP OF EACH GRATE. THIS HAS A ROUND CENTERPIECE WHICH CONTAINS THE VARIOUS LABELS REQUIRED BY THE VGB LAW EACH SIDE HAS A SQUARE NOTCH AT THE BOTTOM MATERIAL: PLASTIC COVER COLOR: LIGHT GRAY SHAPE: SQUARE************************************************
COVER DIMENSIONS: COVER LENGTH & WIDTH: 11-11/16" (A) HEIGHT: 1-1/16" (AT THE OUTSIDE EDGE) MAXIMUM HEIGHT: 2-1/16" (AT THE CENTER OF THE COVER) (B) MAXIMUM HEIGHT ABOVE PLASTER LINE: THIS WILL DEPEND ON THE DEPTH OF THE FRAME (THE SIDE OF THE COVER IS FLUSH WITH A 1-1/16" DEEP FRAME AT THE EDGE) THE CENTER OF THE COVER IS 1" TALLER THAN THE EDGE************************************************
SCREW HOLES: THE COVER HAS SCREWS PLACED SO THE COVER WILL MATCH THE OLDER STANDARD WATERWAY, AND THE PENTAIR AND HAYWARD OLDER AND CURRENT FRAMES THERE IS ALSO AN 11/16" DEEP NOTCH, 5/8" WIDE IN THE CENTER OF EACH SIDE FOR THE 2 SIDES WITH 5 HOLES THE DISTANCE FROM EACH HOLE CENTERLINE TO THE EDGE IS 5/16" FROM EACH SCREW HOLE TO THE OPPOSITE HOLE IS 11-1/16" (MEASURED ON THE CENTERLINE OF EACH HOLE) FOR THE 2 SIDES WITH 3 HOLES THE DISTANCE FROM THE CENTER HOLE CENTERLINE TO THE EDGE IS 5/16" THE DISTANCE FROM THE CENTERLINE OF EACH END HOLE TO THE THE EDGE IS 3/16". (THE END HOLES ARE MUCH CLOSER TO THE EDGE THAN THE CENTER HOLES ARE ON THESE 2 SIDE) FROM THE CENTER SCREW HOLE TO THE OPPOSITE SCREW HOLE IS 11-1/16" (MEASURED ON THE CENTERLINE OF EACH HOLE) FROM THE END HOLE TO THE OPPOSITE HOLE IS 11-5/16" (MEASURED ON THE CENTERLINE OF EACH HOLE) SCREW HOLE PLACEMENT: TOTAL SCREW HOLES - 16 THERE IS ONE SCREW HOLE IN THE CENTER OF EACH SIDE ON THE SIDES WITH 5 HOLES THE HOLES NEXT TO THE CENTER ARE 1-7/16" FROM THE CENTER HOLE (MEASURED ON THE CENTERLINE OF EACH HOLE) THE OUTSIDE HOLES ARE 4-5/16" FROM THE CENTER HOLE (MEASURED ON THE CENTERLINE OF EACH HOLE) ON THE SIDE WITH 3 HOLES THE OUTSIDE HOLES ARE 4-3/8" FROM THE CENTER HOLE (MEASURED ON THE CENTERLINE OF EACH HOLE)************************************************
SCREWS: THERE ARE COMPLETE SETS OF 3 DIFFERENT TYPES OF SCREW (4) #10 X 1-1/2" LONG SELF TAPPING (4) #10 X 1" LONG SELF TAPPING (4) #10-24 X 1-1/4" LONG MACHINE THREAD************************************************
MARKINGS: MODEL RWAV12 XXX IS MOLDED INTO THE CIRCULAR CENTER PIECE THE SPECS REQUIRED BY THE VGB-2008 LAW ARE ALSO MOLDED ON THE COVER
