SLR9 1.5 HP Above Ground Pump Horizontal Discharge - 94022435

THIS PRODUCT IS NO LONGER AVAILABLE

Part # 94022435

By Carvin

  4.5 Average  

Details

Top

Part # 94022435

Alternate Part #'s 9402-2435, 94022435, S15TLR9-6-S1, S15TLR96S1

Product Description

SLR9 WITH 6 FT. CORD AND 3-PRONG GROUNDED PLUG • SINGLE SPEED • 9 O'CLOCK HORIZONTAL DISCHARGE
Patented air-cooled heat sink allows pump to run dry without damage to shaft seal. Exclusive Ring-Lok strainer allows "tool-free" access to strainer basket. Internal ribs in large strainer basket assure flow even when filled with leaves and debris.

  • 60 Hz
  • 115 Volt
  • 1.5 HP
  • 12.4 Amps
  • 29 lbs

Product Specifications

HP:
1-1/2 HP
Speed:
Single
Volts:
115 V
Amps:
12.4
Port Size:
1.5 in.
Cord Type:
6 foot/ 3 prong
Top

?     Asked on 5/10/2019 by Dave B

A few weeks ago I posed a question on your website about a replacement pump and you provided the correct pump to purchase as a replacement. The following information was provided :SLR9 1.5 HP Above Ground Pump Horizontal Discharge - 94022435 I just signed on to purchase this pump however your website says "no longer available". Not sure what to do. Can you provide further advice please? Thanks
 Reply

A  Answered on 5/13/2019 by InyoPools Product Specialist Hector F.

We also carry the pureline above ground pool pump model PL1502 that you can use. The connections are different and may just require standard plumbing and or fittings to above ground pool hose to work. You can also view other above ground pool pumps by clicking here.
 Reply


?     Asked on 6/11/2018 by Scott

Are the connections on this pump 1 1/2 inch?
 Reply

A  Answered on 6/12/2018 by InyoPools Product Specialist Hector F.

The inside port diameter is 1.5 inch and the part number for union connectors which thread to the outside of the ports is 9173F
 Reply


?     Asked on 6/8/2018 by Rich

How does the side discharge mount to my filter I don't see any threads. Mine has 6" plastic tube that turns on to my pump.. Thanks
 Reply

A  Answered on 6/9/2018 by InyoPools Product Specialist Lennox H.

Hi, Rich. You will need the following parts, Interconnect Pipe - 42-3632-00-R, Nut - 14-4273-06-R, Nut O-ring - 47-0228-68-R, Interconnect O-ring - 47-0328-00-R to connect this pump to your filter. 
 Reply


?     Asked on 6/1/2018 by Mike

I have a above ground Avalanche AV60 filter with a Magnetek 1.5 SPL motor. The part number is 7-177760-23,type SP, volts 115,amps. 12.4, rpm 3450, FR R48Y, Form PHS, insul class B, PH 1,CODE K,ENCL DP, SERIAL bu5-16. Need to replace motor. The one that was recommend was the 1 hp.Why is there a different in hp? Do I need to change the impeller because of the difference? What's the best motor do I need, the 1hp or the 1.5hp?
 Reply

A  Answered on 6/1/2018 by InyoPools Product Specialist Lennox H.

Hi, Mike. The horsepower rating that is on your pump is not the actual motor horsepower that's why it's followed by SPL. That means that its a special rating giving to your pump by the manufacturer. You will need the BN25 motor. 
 Reply


?     Asked on 5/29/2018 by Paul

I have a Sherlock to Cousy 80 cartridge filter and I'm leaking between the pump and the motor and I'd like to replace it it's very old looking at your photo with the pump on the left hand side of the motor on the right I need the 90 degree to pop out the back side of it will this connect right to that if I order the one horsepower part number 94022 430
 Reply

A  Answered on 5/29/2018 by InyoPools Product Specialist Lennox H.

Hi, Paul. A 1.5 HP pump may be too large to use with a Sherlock 80 filter. I would recommend staying with the 1 hp model unless you'll be increasing the filter size also. 
 Reply


?     Asked on 5/28/2018 by bob

Hi I have a Jacuzzi 1.0 spl 2 speed serial bz09 17. part no. 7 186554 01. it has a side discharge looking for a compatable replacement hope you can help me out thanks
 Reply

A  Answered on 5/30/2018 by InyoPools Product Specialist Patrick P.

Hi Bob, I would suggest the 1 HP Jacuzzi SLR Horizontal Discharge Pump, however, this pump will be a single speed and not dual speed. We do not carry the dual speed SLR complete pump. You could just replace your motor with a 1 HP Dual Speed Replacement Motor and then use your current pump housing. If you go this route you will also need a Jacuzzi SLR Shaft Seal Kit
 Reply


?     Asked on 4/22/2018 by Ed

Would this pump be a good replacement for my Sta-Rite System 2 PLM 150? Do you have a pump curve for this pump?
 Reply

A  Answered on 4/24/2018 by InyoPools Product Specialist Megan C.

The SLR9 1.5 HP Above Ground Pump Horizontal Discharge - 94022435 is designed for Above Ground Pool applications that do not require the pump to self-prime. This pump is a gravity fed pump, not suction. If you are installing on above ground pool application, yes, it may be installed with your PLMSeries Cartridge Filter 150 Sq. Ft. - PLM150. 
 Reply


?     Asked on 9/4/2017 by Katie L.

Hello, I just purchased a SLR9 1.5 HP Above Ground Pump Horizontal Discharge (94022435) from you. Do you know the parts that I need to purchase in order to connect it the two hoses? The old pump has a connecting piece between the filter pump and hose with an on/off valve. It looks like its attached pretty good. I'd like to purchase a new one. Also, the other opening on the filter pump appears to have a connector between the opening on the filter and where the hose attaches. Thank you!
 Reply

A  Answered on 9/7/2017 by InyoPools Product Specialist Lennox H.

Hi, Katie. You can use the Hose Adapter - 417-6060 for the suction side port and the Interconnect Assembly - 42363408R000 for the discharge port.
 Reply


?     Asked on 7/20/2017 by j.o

this pump is good for a 21' around pool?
 Reply

A  Answered on 7/20/2017 by InyoPools Product Specialist Lennox H.

Hi, J.O. This SLR9 pump is good for a 21' pool with a large enough filter. 
 Reply


?     Asked on 6/24/2017 by Cheryl

what pump & motor will work with a Jacuzzi avalanche 60 filter /
 Reply

A  Answered on 6/26/2017 by InyoPools Product Specialist Alex V.

Cheryl, Is this for an above ground or in ground pool? 
 Reply


?     Asked on 6/23/2017 by Dave

Hi! I have a large pool, 33' round pool. 30,000 plus gallons. I need a 2 spd, 1.5 hp, 115 volt horizontal discharge. However, I really only need the electric motor. I can replace myself, but I need to make sure the mounting flange (from motor to pump) is the same. Can you lend any advice? My pump is model number is S15TLR. Thanks!
 Reply

A  Answered on 6/27/2017 by InyoPools Product Specialist Lennox H.

Hi, Dave. You can replace the motor yourself if you're mechanically inclined. You can use the Century BN50 Motor to replace your existing pump motor. 
 Reply


?     Asked on 12/10/2016 by

can i replace my ao smith 1.5 spl pump with this one? part# 7-177894-24
 Reply

A  Answered on 12/12/2016 by InyoPools Product Specialist Lennox H.

Hi, The correct replacement would be the Jacuzzi SLR9 1HP Pump (94022430). The 1.5 HP model will circulate more water than you may need or that your filter can handle.
 Reply


?     Asked on 12/10/2016 by A. R. Diehl

i have waterway part 3410612-2041 l.5 hp circulator pump with horizontal connection to filter. this appears to be identical, am i correct? thanks.
 Reply

A  Answered on 12/12/2016 by InyoPools Product Specialist Lennox H.

Hi, This pump can be used to replace the Waterway Pump 3410612-2041. However, the connection from the pump to the filter is not compatible with this pump.
 Reply


?     Asked on 11/13/2016 by Greig

What is the advantage to verticle as opposed to horisontal discharge?
 Reply

A  Answered on 11/14/2016 by InyoPools Product Specialist Stacey M.

Hello Greig, sometimes horizontal vs vertical is all about how much space you have or where your plumbing is located, certain people just prefer vertical.
 Reply


?     Asked on 6/27/2016 by ellla

I have a 10000 gal swimming pool. What size pump or HP do I need for that water capacity?
 Reply

A  Answered on 7/3/2016 by InyoPools Product Specialist Lennox H.

Hi Ella, The 1 hp pump is adequate for a 10,000 gallon pool. If you can provide the filter model and or size we confirm if this pump will be sufficient.
 Reply


?     Asked on 6/17/2016 by George Kleist

Will a 1 hp pump work on a 28' round above ground pool with a Hayward heater installed between the pump and pool or should I use a 1.5 hp pump.
 Reply

A  Answered on 6/17/2016 by InyoPools Product Specialist Scott W.

A 1HP jump would work just fine with your size pool.
 Reply


?     Asked on 6/9/2016 by brian

will this pump hook up with an ec 50 hayward filter
 Reply

A  Answered on 6/19/2016 by InyoPools Product Specialist Alex V.

Brian, This will not work with a EC50 filter. The filter connections are not the same.
 Reply


?     Asked on 5/31/2016 by Gary

Would this pump work for an Avalanche AV40-S1LR9-3-HK6 ??
 Reply

A  Answered on 6/5/2016 by InyoPools Product Specialist Lennox H.

Hi Gary, This pump is too large to use with the Avalanche AV40. The Avalanche AV40 has a max flow rate of 40 gpm.
 Reply


?     Asked on 5/30/2016 by tony

can i replace my ao smith 1.5 spl pump with this one? part# 7-77760-23
 Reply

A  Answered on 6/2/2016 by InyoPools Product Specialist Lennox H.

Hi Tony, You can only if your filter is big enough to handle the additional water flow.
 Reply


?     Asked on 5/30/2016 by Tee

Will this work as a replacement for a century lasar sofpool pump?
 Reply

A  Answered on 6/4/2016 by InyoPools Product Specialist Lennox H.

Hi Tee, I can't confirm that it will be an exact replacement base off of the info provided. However, if you can provide us with more info like the make and model of your filter and photos of your current pump we can confirm.
 Reply


?     Asked on 5/28/2016 by Karen Cate

Hello, I have a Sherlok Element Filter system manufactured by Jacuzzi, with an LR Series Pump/Strainer.. I am looking to replace the Strainer and pump assembly with the S15TLR-6-S1 2 speed, 115 volts, Amps 12.0/3.1. The pump assembly outlet must have a horizontal outlet to connect to the filter housing. I am not sure how to or who I can purchase this product through? I am having a hard time locating one online. Karen Cate 96 Clough Hill Rd Lyman, NH 03585 603-616-2538
 Reply

A  Answered on 6/4/2016 by InyoPools Product Specialist Lennox H.

Hi Karen, The reason you're having trouble finding that pump is because there is not one available. You will have to purchase this pump and convert it into a 2-speed pump by switching out the motor.
 Reply


?     Asked on 5/25/2016 by Sue Mininger

Would this pump be a replacement for sta-rite ABGS4F 2A4
 Reply

A  Answered on 5/25/2016 by InyoPools Product Specialist Patrick P.

Hi Sue I would suggest the 94027794 SLR Vertical Discharge Pump as your ABGS4F 2A4 pump is vertical discharge and not horizontal discharge.
 Reply


?     Asked on 5/23/2016 by FRANK

DOES THIS INCLUDE THE CORD?
 Reply

A  Answered on 5/23/2016 by InyoPools Product Specialist Patrick P.

Hi Frank, Yes this pump does include the cord.
 Reply


?     Asked on 5/23/2016 by

Do you sell a dual speed version of this pump?
 Reply

A  Answered on 5/23/2016 by InyoPools Product Specialist Patrick P.

We do have access to the Dual Speed Jacuzzi SLR 1.5 HP Pump but it would be a special order taking 3 weeks for delivery.
 Reply


?     Asked on 5/23/2016 by

Is this a dual speed or single speed pump?
 Reply

A  Answered on 5/23/2016 by InyoPools Product Specialist Dennis R.

This pump is a single speed pump.
 Reply


?     Asked on 6/25/2015 by Jason

Will this pump work with a Jacuzzi Sherlock 80 filter system? Model # SHER80-S1LR9-3-HK6 Order # 94223914
 Reply

A  Answered on 6/25/2015 by InyoPools Product Specialist Hector F.

This pump would be too strong for that model filter. You would need to either use a 3/4 hp model or a Sherlock 160 model to make sure flow rates are compatible.
 Reply


?     Asked on 6/9/2015 by jeff

will this work with a cfr75 filter?
 Reply

A  Answered on 6/9/2015 by InyoPools Product Specialist Patrick P.

Hi Jeff, As long as you have an above ground pool then this pump would work with a Jacuzzi CFR75 Filter.
 Reply


?     Asked on 6/2/2015 by

SLR9 pump matches up with an avalanche 60 filter?
 Reply

A  Answered on 6/4/2015 by InyoPools Product Specialist Lennox H.

If you have a Jacuzzi Avalanche AV60 filter you can use the SLR9 1.5 HP Pump Horizontal Discharge (94022435).
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers

Old pump just died

Written on 6/16/2018 by Guest

Went online bought pump next day received it
Hook up pump to filter turned pump on

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Large Pipe wrench

2     1

16 year-old .Pool pump died. I called and talked with a representative at INYO Pools. Ordered the pump and received it in two. days.

Written on 6/15/2017 by Guest

The sales person was very helpful and knowledgeable. The pump was exactly what I needed and it connected up to my filter system perfect. I put two screws in the base like the old one was mounted, plugged in the motor and it's been running beautifully. It's keeping the pool crystal clear. My wife is happy and so am I. The Penguin fans from Pittsburgh Pa have been saying GO PENGUINS. My wife and I say GO INYO. We will be definitely dealing with you in the future. Thank You

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.5  out of 5 stars)
2 Rating
5 star:
 
(1)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews