$884.99
Part # 94027125
Warranty 1 Year
Alternate Part #'s 25UMF-S2, 25UMFS2, 9402-7125, 94027125
Patented air-cooled heat sink allows pump to run dry without damage to shaft seal. UNCONDITIONAL ONE YEAR WARRANTY AGAINST SEAL FAILURE.
Exclusive dual Ring-Lok™design gives "tool free" access to strainer basket and pump internals.
208 cu. in. (3411 cm3) heavy-duty strainer basketwith exclusive priming tubefor superior priming capabilities.
Exclusive flap prevents debris in the pump strainer, skimmer basket and filter from flowing back into the pool. The flap also prevents residual hot water in the heater from flowing into filter and causing damage to grids, valves, gaskets, etc.
Internal ribs in large strainer basket assure flow, even when filled with leaves and debris.
One-piece casee liminates bolts and gaskets and provides for quiet operation.
Flexible connections- 2" (51 mm) FNPT or 2" (51 mm) unions (included).
Floating eye seal between closed impeller and diffuser maximizes efficiency.
Maximum water temperature 104 °F (40 °C).
Energy saver motors(1/2 HP - 3 HP) are standard on single speed units.
Dimensions of the Jacuzzi Magnum Force pump
Performance of the Jacuzzi Magnum Force pump
Click here for more Jacuzzi Pumps
trying to locate a Inline Heater for a Hot tub, spa/pool. 11kw- one and half inch to 2 inch waterlines.
Reply
Hi, Lisa. We have the Raypak Spapak 11 kW Heater - 001640 and the Hayward Spa Heater 11 kW - CSPAXI11 units available.
Reply
i need to replace a pool motor plus pump.
The motor is a Century Centurion and the pump is a Jacuzzi - Magnum Force.
The manufactures label for the motor shows 2.0 HP, but there is also a label that shows Total HP = 2.4.
Question - what actual HP do i need? Thanks
Reply
Yes if you have a 2hp motor with a higher Service Factor then you would go with this unit. You can also go with Magnum Force V Series 2.7HP Variable Speed Pump (VMF-S2) - 94026140
Reply
