By Carvin


Details

Top

Part # 5064-107

Manufacturer Code 94026130

Alternate Part #'s 3MF-S, 3MF2, 9402-6130, 94026130

Availability Please allow 3 - 4 weeks for delivery - Special Order

Product Description

PureLine Prime Pump

Jacuzzi Magnum Force Pump Features:

  • Patented air-cooled heat sink allows the Jacuzzi Magnum Force Pump to run dry without damage to shaft seal.
  • Exclusive dual Ring-Lok design gives "tool free" access to strainer basket and pump internals.
  • Huge 208 cu. in., heavy-duty strainer basket with exclusive "priming tube" for superior priming capabilities.
  • Exclusive built in flap prevents debris in the pump strainer, skimmer basket, and filter from flowing back into the pool. The flap also prevents residual hot water in the heater from flowing into filter and causing damage to grids, valves, gaskets, etc.
  • One piece case eliminates bolts and gaskets and provides for quiet operation.
  • Flexible plumbing connections - 2" FNPT or 2" unions.(NOT INCLUDED) 
  • Floating eye seal between closed impeller and diffuser maximizes efficiency.
  • Maximum water temperature 104 F.
  • Energy saver motors (1/2 hp - 3 hp) are standard on single speed units, save on your electric bill every month with a Jacuzzi Magnum Force Pump.

Product Specifications

HP:
3 HP
Speed:
Single
Volts:
230
Amps:
16.3
Port Size:
2 in.
Union Connectors:
2 inch included
Service Factor:
1.2
Top

?     Asked on 7/8/2017by Inyo Visitor

i need to replace a pool motor plus pump. The motor is a Century Centurion and the pump is a Jacuzzi - Magnum Force. The manufactures label for the motor shows 2.0 HP, but there is also a label that shows Total HP = 2.4. Question - what actual HP do i need? Thanks
 Reply

A  Answered on 7/10/2017 by InyoPools Product Specialist Joe S.

Yes if you have a 2hp motor with a higher Service Factor then you would go with this unit. You can also go with Magnum Force V Series 2.7HP Variable Speed Pump (VMF-S2) - 94026140
 Reply


?     Asked on 6/2/2019by Ted

I had this pump and it died Do they still make a 3 ho pump to replace it?
 Reply

A  Answered on 6/2/2019 by InyoPools Product Specialist Patrick P.

Hi Ted, I'm sorry but this Jacuzzi Magnum 3 HP is no longer available. I would suggest the 3 HP PureLine Prime as great replacement pump, the plumbing ports on the PureLine Prime are not in the exact same spot as your current pump so you will have a little re-plumbing if you go that route.
 Reply