By Jacuzzi Inc.


Details

Top

Part # 94089160

Alternate Part #'s 9408-9160, 94089160, L160-7C, L1607C, _94089160

Product Description

 

 

  • 14" (35,6 cm), 16" (40,6 cm), 19" (48,3 cm), 22,5" (57,2 cm) and 25" (63,5 cm) models.
  • Upper distribution system integrated into the dial valve and engineered to direct water evenly across the entire surface of the sand – up to 25 gpm/sq.ft. (61 m3/h/m2) without sand migration or channeling.
  • 7-way Dial Valve with "sight glass", automatic air relief, and pressure gauge. The 7 functions include :
    Filtres à sable SÉRIE STINGRAY SERIES sand filters
  • Non-Corrosive Resin Clamp for simple installation and service of dial valve and filter components.
  • Underdrain with "side-slotted" laterals draws water evenly across the full diameter of the sand bed for higher flows, better filtration, longer cycles and more efficient backwashing. Features heavy-duty, freeze resistant hub and easy-service "Snap-Fit" laterals.
  • Deep, high-capacity sand bed carries more debris and extends filter cycles.
  • Blow-molded tank is corrosion-resistant, and UV-resistant.
  • Bottom drain for winterizing and draining.
  • Hose and Hardware included.

 

 

Product Specifications

Tank Diameter:
16 in.
Pipe Size:
1-1/2" in.
Top

?     Asked on 5/15/2015by Inyo Visitor

looking for a valve label for 250l may 01
 Reply

A  Answered on 5/27/2015 by InyoPools Product Specialist Lennox H.

The valve label is not sold separately, you'll have to replace the Valve Cover Dvk-7 to get the valve label.
 Reply


?     Asked on 6/10/2015by Dana

Can you buy just the tank part? Mine is split at the seam.model 160L
 Reply

A  Answered on 6/10/2015 by InyoPools Product Specialist Patrick P.

Hi Dana, Unfortunately the tank by itself is not available so you would require the purchase of the complete new filter.
 Reply


?     Asked on 6/15/2015by Inyo Visitor

Can this Jacuzzi Laser Sand Filter be used on a swimming pool? My pool is 4 feet high, 24 feet long, and 12 feet wide. Like I said the Hayward GM filter tank I have, GMX142AB1, is no longer available. I just want to be clear before I order the comparable filter, if it can be used on a pool, thanks.
 Reply

A  Answered on 6/15/2015 by InyoPools Product Specialist Patrick P.

Yes the Jacuzzi Laser Sand Filter can be used on a swimming pool and is most commonly used on above ground pools.
 Reply


?     Asked on 7/1/2015by cindy

is there a basket inside at the top, under the dial, that needs to be emptied from time to time.
 Reply

A  Answered on 7/2/2015 by InyoPools Product Specialist Lennox H.

Hi Cindy, The Jacuzzi Laser Sand Filter does have a Upper Standpipe Basket Assy (88158001R000) that will require cleaning over time.
 Reply


?     Asked on 7/5/2016by Jerome Johnson

How and when should I clean this filter
 Reply

A  Answered on 7/5/2016 by InyoPools Product Specialist Alan M.

he sand filter is cleaned by using the backwash feature on the valve. You would clean the filter once the pressure in the tank has reached 8-10psi higher than the clean starting pressure.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)