Part # 3300-605
Manufacturer Code 4554
Alternate Part #'s 04554-4, 10127, 55-463-4554, GAM4554
This is a set of 2 rubber wall plugs designed for use with smaller Intex pools.
I lost the plug that holds the air in for the ring on top it is on the side of the pool will this work
Reply
Lisa, In the Intex Easy Set manual, this is listed as the STRAINER HOLE PLUG FOR 16' & BELOW AGP POOLS, but nothing is listed for the top ring. I would double check with Intex first.
Reply
Will these work in the place where the filter hoses would go if I were to not use the pump and want to plug the holes.
Reply
Hi Terri, The Intex Wall Plug Replacement Fittings (4554) can be used to plug the ports for the pump and return for the Intex Pools.
Reply
Will this work to winterize intake and outtake hole on a 24' x 52" metal frame Intext pool? Thanks
Reply
Hi, The Pool Plug Cap (4562) is the correct part that you will need according to the Intex 24' X 52" Metal Frame Pool Parts.
Reply
We have an 18' round intex pool, will these fit for winterizing where the hoses for inlet and outlet were when we remove the hoses and the pump?
Reply
Hi Kristi, The Intex Wall Plug Replacement Fittings (4554) can be used to plug the inlet and outlet for the Intex pools. I'm not sure if it can be used for winterizing. You can contact Intex at (800) 234-6839 to confirm.
Reply
I lost the screw on plug for the air intake for my pool, Intex model 57481. Will this item fit that or do you have something else I can use. Thanks.
Reply
Hi Alan, This wall plug will fit most Intex inflatable pool. I was not able to find model 57481 on their website to confirm.
Reply
The Most Recent Reviews
(4 out of 5 stars) Good idea
Reviewed By: Inyo Customer ()
Good idea but it just doesn't seal that well.
Was this review helpful to you?